[mythtv-users] Anyone good with udev rules?

[Derek Meek]

Stuart Larson wrote:

>>All I can find are a bunch of references to the docs I cannot quite
>>follow :D
>>
>>--
>>Derek "Kazan" Meek
>>----------------------------------------------------------------------------------------
>>“Is God willing to prevent evil, but not able? Then he is impotent. Is he
>>able, but not willing? Then he is malevolent. Is he both able and willing?
>>Whence then is evil?” - Epicurus
>>
>>_______________________________________________
>>mythtv-users mailing list
>>mythtv-users at mythtv.org
>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>    
>>
>
>How about:
>http://www.gossamer-threads.com/lists/mythtv/users/215108#215108  Is that
>what you were looking at?
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>  
>
Saw those - the relevant ones are just links back to the documentation
i've already seen, and didn't understand. I have

bttv0: /dev/video0
ivtv0: /dev/video1
ivtv1: /dev/video2

dmesg output (grepping for bttv or ivtv)

bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 19, latency: 32, mmio:
0xda001000
bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF
[card=78,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
bttv0: using tuner=2
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.1 (tagged release) loading
ivtv: Linux version: 2.6.16-1.2080_FC5 686 REGPARM 4KSTACKS gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: This is the first unit of a PVR500
tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: This is the second unit of a PVR500
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
ivtv: ==================== END INIT IVTV ====================


-- 
Derek "Kazan" Meek
----------------------------------------------------------------------------------------
“Is God willing to prevent evil, but not able? Then he is impotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Whence then is evil?” - Epicurus