[mythtv-users] power off and on frontend only with remote

Steven Adeff adeffs.mythtv at gmail.com
Fri Sep 8 16:10:36 UTC 2006

On 9/8/06, Sam Wong <sam at hellosam.net> wrote:
>  Sorry I didn't follow this thread closely but I hope I can help.
>  ATX power supply does keep the 5V Standby ready even if the computer is
> "off", unless u flipped the switch behind the supply. If your receiver is
> connected to the USB, but it doesn't get any power when the computer is off,
> it should worth to check the jumpers on the motherboard. Most mothers board
> has a jumper to specify which power source to connect to the 5V rail of the
> USB, may be you should try another one.
>  Take Asus M2NPV-VM as an example..It's manual URL:
> ftp://dlsvr03.asus.com/pub/ASUS/mb/socketAM2/M2NPV-VM/e2527_m2npv-vm.pdf
>  Mirror:
> ftp://dlsvr02.asus.com/pub/ASUS/mb/socketAM2/M2NPV-VM/e2527_m2npv-vm.pdf
>  Page 31. Most likely u need +5VSB.
>  I hope this helps
>  Take a look at this one..

Ok, so I need to look at my manual and see how to get USB power while
the machine is off. I think theres a "Wake on USB" option in the BIOS,
though I don't know if that will provide the necesary power to the USB

Thanks for the info!

Before you ask, read the FAQ!
then search the Wiki, and this list,
Mailinglist etiquette -

More information about the mythtv-users mailing list