No subject

the resolution.
Try adding the following line in your xorg.conf,
Device section
     Option "UseEDID" "False"


On 5/23/07, Seth Daniel <mythtv.org at sethdaniel.org> wrote:
>
> On Wed, May 23, 2007 at 03:40:37PM -0500, James Oltman wrote:
> > On 5/23/07, Bill Omer <bill.omer at gmail.com> wrote:
> >>
> >> It's been a constant struggle trying to get a high resolution with my
> >> fx5200 connected via dvi.  I've tried several options ...  disabling
> >> edid, trying dozens of other settings, still no luck.
> >>
> >> I'm getting the bellow in my Xorg.0.log.    I wanted to ask if anyone
> >> on here is also using an nvidia card connected to an hdtv with dvi,
> >> but with a working high resolution?   If so, could you be so kind as
> >> to pass along your xorg.conf
> >>
> >>
> >>
> >> (II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:1:0:0
> >> (--) NVIDIA(0): VideoRAM: 131072 kBytes
> >> (--) NVIDIA(0): VideoBIOS: 04.34.20.18.00
> >> (II) NVIDIA(0): Detected AGP rate: 8X
> >> (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> >> (--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at
> >> PCI:1:0:0:
> >> (--) NVIDIA(0):     TCR RCA Scenium (DFP-0)
> >> (--) NVIDIA(0): TCR RCA Scenium (DFP-0): 135.0 MHz maximum pixel clock
> >> (--) NVIDIA(0): TCR RCA Scenium (DFP-0): Internal Single Link TMDS
> >> (II) NVIDIA(0): Assigned Display Device: DFP-0
> >> (WW) NVIDIA(0): No valid modes for "1024x768"; removing.
> >> (WW) NVIDIA(0): No valid modes for "800x600"; removing.
> >> (II) NVIDIA(0): Validated modes:
> >> (II) NVIDIA(0):     "640x480"
> >> (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
> >> (WW) NVIDIA(0): No size information available in DFP-0's EDID; cannot
> >> compute
> >> (WW) NVIDIA(0):     DPI from EDID.
> >> (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
> >>
> >
> >
> > For our own sanity, what's the make/model of your
> TV?  LCD/Plasma/CRT/DLP?
>
> It may also be useful to see *your* (speaking to the OP) xorg.conf.
> What resolution are you trying to achieve?  What resolutions do your
> television support?
>
> It will also be useful to see your Xorg.0.log when logverbose is turned
> up to, say, 6 (e.g. startx -- -logverbose 6).  This will show the EDID
> information you receive from the TV among other things.
>
> --
> seth / @sethdaniel.org
> I used to work in a fire hydrant factory.  You couldn't park anywhere near
> the place.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>

------=_Part_168024_33404594.1179953609540
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline