[mythtv-users] dish322 and lircd.conf for myth

[John H.]

nope, didn't work for me(usb-uirt, fc5, dish 322 and remote #119946)

Just like before:(


lircd-0.7.1[27239]: accepted new client on /dev/lircd
lircd-0.7.1[27239]: uirt2usb_raw: UIRT version 0509 ok
lircd-0.7.1[27239]: uirt2usb_send: remote not supported
lircd-0.7.1[27239]: error processing command: SEND_ONCE serial-echostar cancel
lircd-0.7.1[27239]: transmission failed
lircd-0.7.1[27239]: removed client



On 10/8/06, Endaf Jones <jonese at zener.com> wrote:
> Yea, there's several things wrong with that lircd.conf.  Try this
> instead (remember to correctly set the post_data field for your
> correct device ID.  You "may" have to tune the timing slightly for
> your CPU speed and such (if your using a serial transmitter).  I've
> been meaning to submit this into lirc for quite some time.
>
> -----------------------------------
> begin remote
>   name            serial-echostar
>   flags           SPACE_ENC|NO_HEAD_REP
>   eps             30
>   aeps            100
>
>   frequency       56000
> #  duty_cycle      32
>
>   one             440  1645
>   zero            440  2780
>
>   header          525  6045
>   ptrail          450
>   gap             6115
>
>   min_repeat      6
>
>   bits            6
>   post_data_bits  10
>
>
> # unit code selection (1-16)
> #  1=0x000  2=0x200  3=0x100  4=0x300
> #  5=0x080  6=0x280  7=0x180  8=0x380
> #  9=0x040 10=0x240 11=0x140 12=0x340
> # 13=0x0C0 14=0x2C0 15=0x1C0 16=0x3C0
>
>   post_data       0x000
>
>
>   begin codes
>     1           4
>     2           5
>     3           6
>     4           8
>     5           9
>     6           10
>     7           12
>     8           13
>     9           14
>     0           17
>     power_on    1
>     select      16
>     cancel      18
>   end codes
> end remote
> -----------------------------------
>
> # Endaf
>
> On 10/7/06, John H. <mistamaila at gmail.com> wrote:
> > ok, off this page, i got this information for lircd.conf
> > http://www.htpcug.com/Multi.htm
> >
> > begin remote
> >
> >  name  DISH_1
> >  bits           16
> >  flags SPACE_ENC|NO_HEAD_REP
> >  eps            30
> >  aeps          100
> >
> >  header        350  6000
> >  one           324  2800
> >  zero          324  1700
> >  ptrail        324
> >  gap          6000
> >  min_repeat      2
> >  toggle_bit      0
> >  frequency    40000
> >
> >     begin codes
> >         tv/video                 0x000000000000A3FF
> >         power                    0x000000000000F7FF
> >         menu                     0x000000000000D3FF
> >         page_up                  0x000000000000C3EF
> >         page_down                0x000000000000E3EF
> >         guide                    0x000000000000AFFF
> >         pointer_up               0x00000000000097FF
> >         pointer_left             0x0000000000008FFF
> >         pointer_right            0x0000000000009FFF
> >         pointer_down             0x00000000000087FF
> >         select                   0x000000000000BFFF
> >         recall                   0x00000000000093FF
> >         info                     0x000000000000FFFF
> >         view                     0x000000000000A7FF
> >         cancel                   0x000000000000B7FF
> >         sys_info                 0x0000000000006FFF
> >         record                   0x00000000000083FF
> >         1                        0x000000000000EFFF
> >         2                        0x000000000000EBFF
> >         3                        0x000000000000E7FF
> >         4                        0x000000000000DFFF
> >         5                        0x000000000000DBFF
> >         6                        0x000000000000D7FF
> >         7                        0x000000000000CFFF
> >         8                        0x000000000000CBFF
> >         9                        0x000000000000C7FF
> >         0                        0x000000000000BBFF
> >         *                        0x0000000000006BFF
> >         #                        0x00000000000067FF
> >     end codes
> >
> > end remote
> >
> >
> >
> > it works now when i do
> >
> > irsend SEND_ONCE DISH_1 info
> >
> > works, and it pops up on my screen, but every other command seems to
> > not work! lircd debug says "remote not supported"
> >
> > any ideas?
> >
> > On 10/7/06, John H. <mistamaila at gmail.com> wrote:
> > > hi, i saw some previous posts about people using dish322 with myth.  i
> > > have dish322, usb-uirt blaster, and need
> > >
> > > /etc/lircd.conf to use so that myth can change channels
> > >
> > > the channel changer script.
> > >
> > > thanks!
> > >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
>
> --
> # Endaf
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>