[mythtv-users] lirc with nebula remote won't work
Derek Meek
thekazan at gmail.com
Mon May 15 16:32:56 EDT 2006
stop lircd and run mode2 (NOT MODE3) - if you get output there then your
configuration for your remote is incorrect - try to find a new one or
build one with irrecord (i built my two universal remote's configs with
irrecord)
Ryan Duffy wrote:
>Having some serious trouble getting lirc working with my Nebula DigiTV remote, which is supposedly natively supported by the 2.6.16 kernel. I'm using Debian, and uptodate mythtv 0.19 fixes.
>
>I've read all the forums, and tried a million different things but it just won't work. I'm sure I'm just doing some dumb.
>
>kern.log finds the remote:
>kernel: input: AT Translated Set 2 keyboard as /class/input/input0
>kernel: input: PS2++ Logitech Wheel Mouse as /class/input/input1
>kernel: input: bttv IR (card=104) as /class/input/input2
>kernel: bttv-input: bttv IR (card=104) detected at pci-0000:04:07.0/ir0
>
>I have entries in /home/mythtv/.lircrc such as:
>begin
> prog = mythtv
> remote = Nebula_DVB
> button = 4
> config = 4
>end
>
>begin
> prog = mythtv
> remote = Nebula_DVB
> button = 5
> config = 5
>end
>
>I have a symlink from /home/mythtv/.mythtv/lircrc to /home/mythtv/.lircrc.
>
>I have /etc/lirc/lircd.conf set up as:
>
>begin remote
>
> name Nebula_DVB
> bits 13
> flags RC5|CONST_LENGTH
> eps 30
> aeps 100
>
> one 917 851
> zero 917 851
> plead 930
> gap 113335
> toggle_bit 2
>
>
> begin codes
> VOLUP 0x1072
> VOLDOWN 0x1073
> TV 0x000000000000100A
> AUX 0x000000000000100B
> DVD/CD 0x000000000000100C
> 1 73
> 2 0x0000000000001002
> 3 0x0000000000001003
> 4 0x0000000000001004
> 5 0x0000000000001005
> 6 0x0000000000001006
> 7 0x0000000000001007
> 8 0x0000000000001008
> 9 0x0000000000001009
> 0 0x0000000000001000
> 16:9 0x0000000000001011
> 14:9 0x0000000000001012
> EXIT 0x0000000000001014
> POWER 0x000000000000100D
> PICTURE 0x000000000000100E
> AUDIO 0x000000000000100F
> I 0x0000000000001010
> EPG 0x0000000000001013
> MENU 0x0000000000001015
> UP 0x0000000000001016
> DOWN 0x0000000000001017
> LEFT 0x0000000000001018
> RIGHT 0x0000000000001019
> OK 0x000000000000101A
> CH+ 0x000000000000101B
> CH- 0x000000000000101C
> VOLUME+ 0x000000000000101D
> VOLUME- 0x000000000000101E
> RED 0x000000000000101F
> GREEN 0x0000000000001020
> YELLOW 0x0000000000001021
> BLUE 0x0000000000001022
> SUBT 0x0000000000001023
> AD 0x0000000000001024
> TEXT 0x0000000000001025
> MUTE 0x0000000000001026
> REWIND 0x0000000000001027
> STOP 0x0000000000001028
> PLAY 0x0000000000001029
> FFORWARD 0x000000000000102A
> CHAPTER 0x000000000000102B
> PAUSE 0x000000000000102C
> PLAYSPEED 0x000000000000102D
> RECORD 0x000000000000102E
> PIP 0x000000000000102F
> ZOOM- 0x0000000000001030
> ZOOM+ 0x0000000000001031
> CAPTURE 0x0000000000001032
> WEB 0x0000000000001033
> EMAIL 0x0000000000001034
> PHONE 0x0000000000001035
> PC 0x0000000000001036
> end codes
>
>end remote
>
>When I do irw I get no output at all. When I do 'ircat mythtv' I get no output at all.
>However, if I look in /var/log/daemon.log when running irw or ircat, the remote keypresses are being detected there:
>lircd 0.7.1pre2[23304]: accepted new client on /dev/lircd
>lircd 0.7.1pre2[23304]: initializing '/dev/input/event2'
>lircd 0.7.1pre2[23304]: devinput_rec
>lircd 0.7.1pre2[23304]: time 1147719998.616657 type 1 code 71 value 1
>lircd 0.7.1pre2[23304]: code 80010047
>lircd 0.7.1pre2[23304]: devinput_decode
>lircd 0.7.1pre2[23304]: devinput_rec
>lircd 0.7.1pre2[23304]: time 1147719998.616662 type 0 code 0 value 0
>lircd 0.7.1pre2[23304]: code 00000000
>lircd 0.7.1pre2[23304]: devinput_decode
>lircd 0.7.1pre2[23304]: devinput_rec
>lircd 0.7.1pre2[23304]: time 1147719998.932662 type 1 code 71 value 0
>lircd 0.7.1pre2[23304]: code 00010047
>lircd 0.7.1pre2[23304]: devinput_decode
>lircd 0.7.1pre2[23304]: devinput_rec
>lircd 0.7.1pre2[23304]: time 1147719998.932667 type 0 code 0 value 0
>lircd 0.7.1pre2[23304]: code 00000000
>lircd 0.7.1pre2[23304]: devinput_decode
>lircd 0.7.1pre2[23304]: devinput_rec
>lircd 0.7.1pre2[23304]: time 1147719999.720702 type 1 code 72 value 1
>lircd 0.7.1pre2[23304]: code 80010048
>lircd 0.7.1pre2[23304]: devinput_decode
>lircd 0.7.1pre2[23304]: removed client
>lircd 0.7.1pre2[23304]: closing '/dev/input/event2'
>
>Can anyone spot anything dumb in my setup? Any suggestions on what else I can do to try and make it work?
>
>Thanks very much!
>
>
>_______________________________________________
>Join Excite! - http://www.excite.com
>The most personalized portal on the Web!
>
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
More information about the mythtv-users
mailing list