[mythtv-users] MythTV output to HDMI IN
okcancel at yahoo.com
Sun May 7 21:08:34 EDT 2006
--- Gabe Rubin <gaberubin at gmail.com> wrote:
> On 5/7/06, moogie <okcancel at yahoo.com> wrote:
> > There are 3 PCI slots:
> > Three 5-V, half-length, 32-bit, 33-MHz (slots 2
> > through 4)
> > There are 2 PCIe (PCI Express) slots:
> > 2.5-GHz PCI Express x8, 3.3-V, 12-V (slot 1)
> > 2.5-GHz PCI Express x1, 3.3-V, 12-V (slot 5)
> You will need a video card that goes in either the
> PCI or PCIe slot. You
> can use VGA and convert the VGA -> component via an
> audio authority device
> (around $100), or you can use DVI and get a DVI ->
> HDMI cable (I got one for
> about $10 online doing some froogle searching). I
> recommend the latter
> route, and it keeps everything digital. Note, the
> audio will not be
> transported and you will need to figure out another
> way to deal with audio
> (most likely, plugging your sound card into either
> your receiver or tv).
> A nvidia 5200 fx seems to be the favorie for many
> around here, and it is
> what I use. You don't need anything more powerful,
> and may lose some
> Check the list. This has been discussed countless
> > _______________________________________________
I agree with "use DVI and get a DVI -> HDMI cable"
because "it keeps everything digital".
If I use a separate audio feed - will the audio and
video be in sync?
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
More information about the mythtv-users