[mythtv-users] HD-3000 recording corruption
R. G. Newbury
newbury at mandamus.org
Thu Mar 30 23:18:09 UTC 2006
Patrick Ouellette wrote:
> On Thu, Mar 30, 2006 at 02:50:06PM -0700, Brian Wood wrote:
>>On Mar 30, 2006, at 2:41 PM, Steven Ihde wrote:
>>>On Wednesday 29 March 2006 07:22, Craig Partin wrote:
>>>>This is the first time I have been stumped in over two years of
>>>>use. I got my HD-3000 working just fine tuning QAM stations over
>>>>cable in myth. The system works flawlessly and reliably except that
>>>>QAM recordings get trashed when anything else is happening on the
>>>>system. It records beautifully when nothing else is happening. This
>>>>happens on all channels, HD and SD. I can playback 1080i content
>>>>XVMC just fine, even with bob.
> Sounds like interference getting into the HD-3000 from the video card.
> Try moving them farther apart, electrically shielding the card(s), and
> make sure if you have a jumper cable between the sound card and the HD-3000
> that it is either removed or has RFI protection (a couple of turns through
> a torroidal core at each end).
> Good Luck.
This was going to be my response too.
Since it is video related it has to be something the video card does,
either as an interference transmission or on the bus. Since it seems to
be size related I would not think it would be the bus. It is related to
the 'active' area of the screen.
You might, just to see if that is what is going on, try putting
something between the 2 cards to shield them from each other. A piece of
aluminum plate, wrapped in cling wrap to avoid shorting things, would
do. Or for that matter a piece of alum foil between 2 sheets of paper.
Just remember to ground one corner of the shield to the case.
More information about the mythtv-users