[mythtv-users] MOtorola 6200 - firewire

Steven Adeff adeffs.mythtv at gmail.com
Fri Mar 17 00:47:50 UTC 2006


On 3/16/06, Greg Oliver <goliver at cistera.com> wrote:
> On Thu, 2006-03-16 at 19:04 -0500, Steven Adeff wrote:
> > On 3/16/06, Greg Oliver <goliver at cistera.com> wrote:
> > > On Thu, 2006-03-16 at 17:22 -0600, Greg Oliver wrote:
> > > > Quick rundown.  I am running Myth 0.18.1-r2 from Gentoo 2006.0.  I get
> > > > the following messages when I connect the 6200 to my laptop via the
> > > > firewire port.
> > > >
> > > > Mar 11 17:31:27 localhost ieee1394: Node added: ID:BUS[0-00:1023]
> > > > GUID[00159aff fe2202dc]
> > > > Mar 11 17:31:27 localhost ieee1394: Node changed: 0-00:1023 -> 0-01:1023
> > > > Mar 11 17:31:27 localhost ieee1394.agent[7145]: ... no drivers for
> > > > IEEE1394 prod uct 0x/0x/0x
> > > > Mar 11 17:31:27 localhost ieee1394.agent[7174]: ... no drivers for
> > > > IEEE1394 prod uct 0x/0x/0x
> > > > Mar 11 17:31:27 localhost ieee1394.agent[7168]: ... no drivers for
> > > > IEEE1394 prod uct 0x/0x/0x
> > > > Mar 11 17:31:27 localhost ieee1394.agent[7187]: ... no drivers for
> > > > IEEE1394 prod uct 0x000000/0x005068/0x010101
> > > > Mar 11 17:31:27 localhost ieee1394: raw1394: /dev/raw1394 device
> > > > initialized
> > > >
> > > > Plugreport sees the device @ host0, node1 just like is in syslog.  I
> > > > pretty much folloed the guide @
> > > > http://wilsonet.com/mythtv/fcmyth.php even though I do not run FC, but
> > > > the relevant tests were all run.  The test-mpeg2 never captures a frame.
> > > > Also, u-dev does work properly and create the device nodes, so I did not
> > > > have to follow that portion.
> > > >
> > > > So I was wondering if someone could post the relevant portions of the
> > > > kernel that must be enabled (I have compiled it 10 ways from Sunday with
> > > > all and minimal options) and tried everything I need to know.
> > > >
> > > > I do not know if it means the firewire is off on the 6200 - I doubt it
> > > > since they negotiate.  When I start mythbackend, it immediately says No
> > > > Motorola DCT 6200 found on the bus.
> > > >
> > > > I no longer have the 6200 in front of me to test, but will be going back
> > > > this weekend to try some more.  My regular box is running 0.19, and I
> > > > believe I read that firewire is non-functional in that version, so I
> > > > went back to 0.18 on my laptop since I didn't want to lug my PC across
> > > > town.
> > > >
> > > > Is there something I may be overlooking somewhere?
> > >
> > > Not that I usually reply to my own emails, but I saw in one place (can't
> > > remember) that the fireqwire port needed to be 200MB, but that didn't
> > > make sense since 100 is plenty.  Anyhow, I only have 100MB - if that
> > > matters.
> > >
> > > Thanks,
> > >
> > > Greg
> >
> > do you have the following installed?
> >  libavc1394-0.5.1
> >  libiec61883-1.0.0
> >  libraw1394-1.2.0
>
> Calculating dependencies ...done!
> [ebuild   R   ] sys-libs/libavc1394-0.4.1  0 kB
> [ebuild   R   ] media-libs/libiec61883-1.0.0-r1  -examples 0 kB
> [ebuild   R   ] sys-libs/libraw1394-1.2.0  0 kB
>
> Total size of downloads: 0 kB
> greg at localhost ~ $
>
> , so the only diff is libavc1394 - does it need to be at 0.5.1?
>

possibly? I don't know, but those are the versions I'm running on two
machines that talk with the DCT62xx machines without problem.

--
Steve


More information about the mythtv-users mailing list