[mythtv-users] Cinergy hybrid USB XS installation Problem under FC5

[Darren]

You will need to install a dvb module compatible with your card, try using 
some of the supplied modules  in   
/lib/modules/(kernel ver)/kernel/drivers/media/dvb  
use modprobe  to load a module.

On Fri, 23 Jun 2006 08:11 pm, Reinhard Sy wrote:
> Hello I am new to this list.
>
>
> I do not know if this is the right forrum to ask . I also ask this
> question to the Fedora-List but got not answer. Now I will try it
> here...
>
>
> I have installed mythtv-suite from freshrpms.
>
> The first problem is:
>
>         The card is detected but not as an DVB-Tuner.
> If I insert the usb-DVB-Tuner I get the following kernel-modules loaded:
>
>
> snd_usb_audio          69953  0
> snd_usb_lib            15169  1 snd_usb_audio
> snd_rawmidi            24385  1 snd_usb_lib
> snd_hwdep               9797  1 snd_usb_audio
>
> This is not what I wanted.
>
> Does I need to build my own Kernel  to make it runnable with this card ?
> My current Kernel is:
>
> Linux XXX.XXX 2.6.16-1.2133_FC5 #1 Tue Jun 6 00:52:14 EDT 2006 i686 i686
> i386 GNU/Linux
>
> lsusb
>
> gives:
>
> ~ $ lsusb
> Bus 005 Device 004: ID 0ccd:0042 TerraTec Electronic GmbH
> Bus 005 Device 002: ID 126f:2168 TwinMOS Mobile Disk III
> Bus 005 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
> Bus 002 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 003 Device 003: ID 046d:c00f Logitech, Inc.
> Bus 003 Device 001: ID 0000:0000
>
> in /etc/sysconfig/hwconf:
>
> class: OTHER
> bus: USB
> detached: 0
> desc: "TerraTec Electronic GmbH Cinergy Hybrid T USB XS"
> usbclass: 255
> usbsubclass: 0
> usbprotocol: 255
> usbbus: 5
> usblevel: 1
> usbport: 7
> usbdev: 4
> vendorId: 0ccd
> deviceId: 0042
> usbmfr: TerraTec Electronic GmbH
> usbprod: Cinergy Hybrid T USB XS
>
> The card is detected - but no driver is loaded, does I have to write a
> new udev-rule for this device ? If so can anybody point to a quick
> HOWTO, Thanks.
>
> I have no /dev/video - Device or anything else there.
>
> I can manually run insmod em28xx to insert the kernel-module but this
> does not allows me to use the usb-hardware.
>
> dmesg does not show anything interesting to me.
>
>
> Any hints are welcome.
> Reinhard
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
> !DSPAM:449bbeb9155232331933253!

-- 
Peace Bro