[mythtv-users] FC5 and Fusion DVB-T Dual Digital

Anthony Goddard anthony at bondimaging.com
Wed Jul 26 05:22:28 UTC 2006


Thanks for the update! I had a feeling I might not need to install the
dvb drivers manually...
If you have notes you are able to post it would be great, I'll do a yum
install mythtv-suite in the meantime!

Cheers,
Anthony 

-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Shanon Mulley
Sent: Wednesday, 26 July 2006 3:17 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] FC5 and Fusion DVB-T Dual Digital

Hiya,

Just a quick note (I'm at work, so I cant do much in detail),

I also use the dual digital DVICO card, with FC5. If you have the latest
kernel, there is no need to install the dvb drivers manually - the
current ones installed/updated with yum work fine. I forget the exact
steps (I made notes, but they are at home), but I do know that:
1) It does not involve installing dvb drivers manually
2) It does involve installing kernel-doc or something like that
3) I forget the rest.

If your still having problems by the time I get home (late tonight), I
should be able to post some better instructions.

Shanon.

On 7/26/06, Anthony Goddard <anthony at bondimaging.com> wrote:
>
> Hi All,
> I have put together the following setup:
>
> 3Ghz Pentium-D D/core
> Fedora Core 5 32bit - Kernel 2.6.17-1.2157_FC5smp Nvidia FX6200 with 
> TurboCache (using s-video out) Fusion DVB-T Dual Digital tuner (the 
> Australia / Europe one)
>
>
> I can install mythtv-suite through yum, but I run into all sorts of 
> problems with building the dvb drivers after that.
> Basically I install mercurial, in the /root directory I run "hg clone 
> http://linuxtv.org/hg/v4l-dvb"
> then inside the v4l-dvb folder I run make.
>
> I keep running into all sorts of errors when trying to run this.
>
> Before I get into too many specifics, I was just wondering if there's 
> anyone out there with a similar setup who knows if I need to do 
> anything different to get it working.
> I've been working off Jarrad Wilson's guide as well as 
> http://mythtv.org/wiki/index.php/DVICO-Ultraview_Install_in_Australia
>
> I have also installed the firmware (.fw file) before, but had errors 
> with frontend not initializing still I have had Myth running fine on 
> the same box running FC4.
>
>
> Because I played around a lot and thought I might have done more 
> damage than good, I've formatted and reinstalled FC5 at this stage, so

> all i have done is a yum upgrade & a yum install Kernel-Devel, and 
> nothing further, and this is my dmesg. (I have only pasted the part
that look relevant).
>
> Hope someone can help!
>
> Cheers,
> anthony
>
>
> hub 3-0:1.0: 2 ports detected
> usb 1-5: new high speed USB device using ehci_hcd and address 2
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 
> 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus 
> registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 177, io 
> base 0x0000b400 usb usb4: configuration #1 chosen from 1 choice hub 
> 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected cx2388x v4l2 
> driver version 0.0.5 loaded usb 1-5: configuration #1 chosen from 1 
> choice cx2388x dvb driver version 0.0.5 loaded
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 
> 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus 
> registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 169, io 
> base 0x0000b800 usb usb5: configuration #1 chosen from 1 choice hub 
> 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 20 (level, low) -> IRQ 233 
> CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual

> Digital [card=44,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 
> 0x1fe
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will

> try to load a firmware
> dvb-usb: did not find the firmware file. (dvb-usb-bluebird-01.fw) 
> Please see linux/Documentation/dvb/ for more details on 
> firmware-problems. (-2)
> dvb_usb_cxusb: probe of 1-5:1.0 failed with error -22
> cx88[0]/0: found at 0000:04:00.0, rev: 5, irq: 233, latency: 32, mmio:
> 0xe5000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> ACPI: PCI Interrupt 0000:04:00.2[A] -> GSI 20 (level, low) -> IRQ 233
> cx88[0]/2: found at 0000:04:00.2, rev: 5, irq: 233, latency: 32, mmio:
> 0xe6000000
> cx88[0]/2: cx2388x based dvb card
> cx88[0]: frontend initialization failed
> cx88[0]/2: cx8802_stop_dma
> cx88-dvb: probe of 0000:04:00.2 failed with error -1 cx2388x blackbird

> driver version 0.0.5 loaded usb 5-1: new full speed USB device using 
> uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice
> usbcore: registered new driver dvb_usb_cxusb
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1b.0 to 64 hw_random 
> hardware driver 1.0.0 loaded
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


More information about the mythtv-users mailing list