[mythtv-users] FC5 and Fusion DVB-T Dual Digital

[Shanon Mulley]

Hiya,

Just a quick note (I'm at work, so I cant do much in detail),

I also use the dual digital DVICO card, with FC5. If you have the
latest kernel, there is no need to install the dvb drivers manually -
the current ones installed/updated with yum work fine. I forget the
exact steps (I made notes, but they are at home), but I do know that:
1) It does not involve installing dvb drivers manually
2) It does involve installing kernel-doc or something like that
3) I forget the rest.

If your still having problems by the time I get home (late tonight), I
should be able to post some better instructions.

Shanon.

On 7/26/06, Anthony Goddard <anthony at bondimaging.com> wrote:
>
> Hi All,
> I have put together the following setup:
>
> 3Ghz Pentium-D D/core
> Fedora Core 5 32bit - Kernel 2.6.17-1.2157_FC5smp
> Nvidia FX6200 with TurboCache (using s-video out)
> Fusion DVB-T Dual Digital tuner (the Australia / Europe one)
>
>
> I can install mythtv-suite through yum, but I run into all sorts of problems
> with building the dvb drivers after that.
> Basically I install mercurial, in the /root directory I run "hg clone
> http://linuxtv.org/hg/v4l-dvb"
> then inside the v4l-dvb folder I run make.
>
> I keep running into all sorts of errors when trying to run this.
>
> Before I get into too many specifics, I was just wondering if there's anyone
> out there with a similar setup who knows if I need to do anything different
> to get it working.
> I've been working off Jarrad Wilson's guide as well as
> http://mythtv.org/wiki/index.php/DVICO-Ultraview_Install_in_Australia
>
> I have also installed the firmware (.fw file) before, but had errors with
> frontend not initializing still
> I have had Myth running fine on the same box running FC4.
>
>
> Because I played around a lot and thought I might have done more damage than
> good, I've formatted and reinstalled FC5 at this stage, so all i have done
> is a yum upgrade & a yum install Kernel-Devel, and nothing further, and this
> is my dmesg. (I have only pasted the part that look relevant).
>
> Hope someone can help!
>
> Cheers,
> anthony
>
>
> hub 3-0:1.0: 2 ports detected
> usb 1-5: new high speed USB device using ehci_hcd and address 2
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000b400
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> cx2388x v4l2 driver version 0.0.5 loaded
> usb 1-5: configuration #1 chosen from 1 choice
> cx2388x dvb driver version 0.0.5 loaded
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000b800
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 20 (level, low) -> IRQ 233
> CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual
> Digital [card=44,autodetected]
> TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will try
> to load a firmware
> dvb-usb: did not find the firmware file. (dvb-usb-bluebird-01.fw) Please see
> linux/Documentation/dvb/ for more details on firmware-problems. (-2)
> dvb_usb_cxusb: probe of 1-5:1.0 failed with error -22
> cx88[0]/0: found at 0000:04:00.0, rev: 5, irq: 233, latency: 32, mmio:
> 0xe5000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> ACPI: PCI Interrupt 0000:04:00.2[A] -> GSI 20 (level, low) -> IRQ 233
> cx88[0]/2: found at 0000:04:00.2, rev: 5, irq: 233, latency: 32, mmio:
> 0xe6000000
> cx88[0]/2: cx2388x based dvb card
> cx88[0]: frontend initialization failed
> cx88[0]/2: cx8802_stop_dma
> cx88-dvb: probe of 0000:04:00.2 failed with error -1
> cx2388x blackbird driver version 0.0.5 loaded
> usb 5-1: new full speed USB device using uhci_hcd and address 2
> usb 5-1: configuration #1 chosen from 1 choice
> usbcore: registered new driver dvb_usb_cxusb
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> hw_random hardware driver 1.0.0 loaded
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>