[mythtv-users] ivtv upgrade problems to new 2.6.15-1.1831_FC4o new

[scott]

On Fri, 2006-02-10 at 13:05 -0800, scott wrote:


PS

As you can see, the problem is with the msp3400 and the tveeprom
modules.

How do I prevent/remedy this when I upgrade?
I have tried several times and it still won't work

Thanks


> Hi,
> I am trying to upgrade to a new kernel and am having problems
> with ivtv.
> 
> I reinstalled all three componenents and it still won't work.
> e/g ivtv ivtv-firmware ivtv-kmdl....
> 
> Any ideas?
> 
> Thanks
> 
> 
> 
> Feb 10 12:55:18 localhost kernel: ivtv:  ==================== START INIT
> IVTV ====================
> Feb 10 12:55:18 localhost kernel: ivtv:  version 0.4.2 (tagged release)
> loading
> Feb 10 12:55:18 localhost kernel: ivtv:  Linux version:
> 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0
> Feb 10 12:55:18 localhost kernel: ivtv:  In case of problems please
> include the debug info between
> Feb 10 12:55:18 localhost kernel: ivtv:  the START INIT IVTV and END
> INIT IVTV lines, along with
> Feb 10 12:55:18 localhost kernel: ivtv:  any module options, when
> mailing the ivtv-users mailinglist.
> Feb 10 12:55:18 localhost kernel: ivtv0: Autodetected WinTV PVR 350 card
> (cx23415 based)
> Feb 10 12:55:18 localhost kernel: ACPI: PCI Interrupt 0000:00:06.0[A] ->
> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
> Feb 10 12:55:18 localhost kernel: ivtv0: Unreasonably low latency timer,
> setting to 64 (was 32)
> Feb 10 12:55:18 localhost kernel: ivtv0: Failed to load module tveeprom
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x50
> not found for command 0x0!
> Feb 10 12:55:18 localhost kernel: ivtv0: Error -19 reading Hauppauge
> eeprom.
> Feb 10 12:55:18 localhost kernel: ivtv0: Possible causes: the tveeprom
> module was not loaded, or
> Feb 10 12:55:18 localhost kernel: ivtv0: the eeprom kernel module was
> loaded before the tveeprom module.
> Feb 10 12:55:18 localhost kernel: tuner 1-0061: chip found @ 0xc2 (ivtv
> i2c driver #0)
> Feb 10 12:55:18 localhost kernel: ivtv0: i2c attach to card #0 ok
> [client=(tuner unset), addr=61]
> Feb 10 12:55:18 localhost kernel: saa7115 1-0021: saa7115 found @ 0x42
> (ivtv i2c driver #0)
> Feb 10 12:55:18 localhost kernel: ivtv0: i2c attach to card #0 ok
> [client=saa7115, addr=21]
> Feb 10 12:55:18 localhost kernel: saa7127 1-0044: saa7129 found @ 0x88
> (ivtv i2c driver #0)
> Feb 10 12:55:18 localhost kernel: ivtv0: i2c attach to card #0 ok
> [client=saa7127, addr=44]
> Feb 10 12:55:18 localhost kernel: ivtv0: Failed to load module msp3400
> Feb 10 12:55:18 localhost kernel: tda9887 1-0043: chip found @ 0x86
> (ivtv i2c driver #0)
> Feb 10 12:55:18 localhost kernel: ivtv0: i2c attach to card #0 ok
> [client=tda9887, addr=43]
> Feb 10 12:55:18 localhost kernel: ivtv0: Could not detect tuner
> standard, defaulting to NTSC.
> Feb 10 12:55:18 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw
> firmware (262144 bytes)
> Feb 10 12:55:18 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw
> firmware (262144 bytes)
> Feb 10 12:55:18 localhost kernel: ivtv0: Encoder revision: 0x02040024
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: Encoder Firmware can be
> buggy, use version 0x02040011 or 0x02050032.
> Feb 10 12:55:18 localhost kernel: ivtv0: Decoder revision: 0x02020023
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA encoder MPEG
> stream: 128 x 32768 buffers (4096KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA encoder YUV
> stream: 194 x 10800 buffers (2048KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA encoder VBI
> stream: 120 x 17472 buffers (2048KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA encoder PCM audio
> stream: 455 x 4608 buffers (2048KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: Create encoder radio stream
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA decoder MPEG
> stream: 16 x 65536 buffers (1024KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA decoder VBI
> stream: 512 x 2048 buffers (1024KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: Create decoder VOUT stream
> Feb 10 12:55:18 localhost kernel: ivtv0: Allocate DMA decoder YUV
> stream: 24 x 43200 buffers (1024KB total)
> Feb 10 12:55:18 localhost kernel: ivtv0: loaded v4l-cx2341x-init.mpg
> firmware (155648 bytes)
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40086d11!
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610!
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611!
> Feb 10 12:55:18 localhost kernel: tuner 1-0061: tuner type not set
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40085618!
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610!
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611!
> Feb 10 12:55:18 localhost kernel: tuner 1-0061: tuner type not set
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x402c5639!
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610!
> Feb 10 12:55:18 localhost kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611!
> Feb 10 12:55:18 localhost kernel: ivtv0: Initialized WinTV PVR 350, card
> #0
> Feb 10 12:55:18 localhost kernel: ivtv:  ====================  END INIT
> IVTV  ====================
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users