[mythtv-users] KWorld ATSC-110 Question

[Jake Palmer]

>I'm starting to think my problem is how this card is
>detected. I took the card out and re-installed but it
>kept getting detected as a 10Moon PCI TV Card. After
>some searching, I noticed a line in my modprobe.conf
>that said options saa7134 card=21. Why it did this I
>don't know as I didn't add this. Anyhow, I commented
>the line out and it picked it up as card=90. The only
>problem is that the dmesg says it's tuner=61 and I
>would think tuner=68 makes more sense. I then added
>the options saa7134 card=90 tuner=68 and then the card
>doesn't show up in dmesg. So if tuner=68 is correct,
>how do I set this?
>
>Here's my dmesg:
>
>saa7133[0]: found at 0000:02:09.0, rev: 240, irq: 18,
>latency: 32, mmio: 0xfeaff800
>saa7133[0]: subsystem: 17de:7350, board: Kworld
>ATSC110 [card=90,insmod option]
>saa7133[0]: board init: gpio is 100
>saa7133[0]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff
>ff ff ff ff ff ff ff
>tuner 0-0061: chip found @ 0xc2 (saa7133[0])
>saa7133[0]: registered device video0 [v4l2]
>saa7133[0]: registered device vbi0
>
>Also, I'm loading the saa7134 module but dmesg says
>saa7133.

I blacklist saa7134 and load saa7134-dvb.  Everything is autodetected 
correctly on my system.

_________________________________________________________________
Fixing up the home? Live Search can help 
http://imagine-windowslive.com/search/kits/default.aspx?kit=improve&locale=en-US&source=hmemailtaglinenov06&FORM=WLMTAG