[mythtv-users] DVD R/W Hardware change

[Tim Scholl]

I replaced my DVD R/W to a newer dual_layer drive.

Since doing none of the "Optical Disks" functionswork.

I know the hardware is detected, see dmegs below:

--snip ---
Probing IDE interface ide1...
hdd: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS8913/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdb: max request size: 1024KiB
hdb: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS`801/255/63,
UDMA(100)
hdb: cache flushes supported
 hdb: unknown partition table
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
--snip--

I looked in /dev and found the dvd and cdrom were still linked to hdc.

So I deleted the links for dvd -> /dev/hdc and cdrom -> /dev/hdc and
recreated them for dvd -> /dev/hdd and cdrom -> /dev/hdd

But that failed to fix the problem.

When I try to import a cd the screen just flashes a few time and then hangs
until you hit escape,
and when it tries to burn a DVD, I get the following message in the
mythburn.log when it gets to where it should burn the DVD:

--snip--
Burning DVD-R image
Sent UDP/XML packet to IP 255.255.255.255 and port: 6948
:-( unable to open64("/dev/dvd",O_RDONLY): No such device or address
***********************************
MythTV BurnDVD stopped due to error
***********************************
Sent UDP/XML packet to IP 255.255.255.255 and port: 6948
--snip--

What am I missing?

I'm running KnoppMyth R5C7

Thanks

-- 
Tim Scholl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060818/e416fcab/attachment.htm