[mythtv-users] Modeline adjustments?
Steven Adeff
adeffs.mythtv at gmail.com
Fri Aug 11 00:11:49 UTC 2006
On 8/10/06, Morten Rønseth <morten.ronseth at webfx.no> wrote:
>
> Tim Scholl wrote:
> But looking closer I still do not see modelines for
>
> "1920x1080_60i" or "1280x720_60"
>
> Any suggestions?
>
>
> Please enclose a verbatim (unedited) version of xorg.conf.
>
>
> Cheers,
>
>
> -Morten
>
>
> Tim
>
>
>
> On 8/10/06, Tim Scholl <tascholl at gmail.com> wrote:
> >
> > I down loaded and installed 1.0-8762
> >
> > NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15
> 13:06:38 PDT 2006
> >
> > It updated my XF86Config-4 with the new modeline:
> > ModeLine "1920x1200" 193.2 1920 2048 2256 2592 1200 1201 1204 1242
> +hsync -hsync
> >
> > But when I look at the XFree86.0.log
> >
> > --snip--
> > (II) Setting vga for screen 0.
> > (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
> > (==) NVIDIA(0): RGB weight 888
> > (==) NVIDIA(0): Default visual is TrueColor
> > (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
> > (**) NVIDIA(0): Enabling RENDER acceleration
> > (II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:1:0:0
> > (--) NVIDIA(0): VideoRAM: 262144 kBytes
> > (--) NVIDIA(0): VideoBIOS: 04.34.20.27.02
> > (II) NVIDIA(0): Detected AGP rate: 8X
> > (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> > (--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at
> PCI:1:0:0:
> > (--) NVIDIA(0): Samsung (CRT-0)
> > (--) NVIDIA(0): Samsung (CRT-0): 350.0 MHz maximum pixel clock
> > (II) NVIDIA(0): Assigned Display Device: CRT-0
> > (WW) NVIDIA(0): No valid modes for "1920x1200"; removing.
> > (II) NVIDIA(0): Validated modes:
> > (II) NVIDIA(0): "1024x768"
> > (II) NVIDIA(0): "800x600"
> > (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
> > (WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot
> compute
> > (WW) NVIDIA(0): DPI from EDID.
> > (**) NVIDIA(0): DPI set to (56, 65); computed from "DisplaySize" Monitor
> section option
> > (--) Depth 24 pixmap format is 32 bpp
> > (II) do I need RAC? No, I don't.
> > --snip--
> >
> > Since I will be connecting this through a 9A60 to my HDTV dont I also need
> to specify interlaced?
> >
please please bottom post (check my sig for mailinglist etiquette.
here's some of my xorg.conf for my frontend that uses my PCX5300 (a
FX5200 grafted on to a PCIE card) VGA output through my 9A60 to my
HDTV with driver 8756...
Section "Device"
Identifier "fx5200"
Driver "nvidia"
Option "RenderAccel" "1"
Option "RandRRotation" "1"
Option "IgnoreDisplayDevices" "TV"
Option "Coolbits" "1"
VendorName "All"
BoardName "All"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Sanyo"
Device "fx5200"
Monitor "HDTV"
DefaultDepth 24
Option "NoLogo" "False"
Option "IgnoreDisplayDevices" "TV"
Option "RandRRotation" "True"
Option "DPI" "148 x 148"
Option "ConnectedMonitor" "CRT"
Option "UseDisplayDevice" "CRT-0"
SubSection "Display"
Depth 24
Modes "1920x1080_60i" "1280x720_60"
EndSubSection
EndSection
I have no modelines for "1920x1080_60i" "1280x720_60"
--
Steve
Before you ask, read the FAQ!
http://www.mythtv.org/wiki/index.php/Frequently_Asked_Questions
then search the Wiki, and this list,
http://www.gossamer-threads.com/lists/mythtv/
Mailinglist etiquette -
http://www.mythtv.org/wiki/index.php/Mailing_List_etiquette
More information about the mythtv-users
mailing list