[mythtv-users] Problems with ATSC and Dvico fusionhdtv5 lite card,

Unix Fun unix_fun at hotmail.com
Fri Aug 4 18:34:36 UTC 2006


Running FC4
Linux mythtv 2.6.17-1.2142_FC4 #1 Tue Jul 11 22:41:14 EDT 2006 i686 athlon 
i386 GNU/Linux

Im not able to tune anything and i think the following error has something 
to do with it this line:
2006-08-04 13:31:35.128 DVB#0 WARNING - Symbol Rate setting (0) is out of 
range (min/max:5056941/10762000)

mythbackend
Linux mythtv 2.6.17-1.2142_FC4 #1 Tue Jul 11 22:41:14 EDT 2006 i686 athlon 
i386 GNU/Linux
[root at mythtv szap]# mythbackend
2006-08-04 13:31:35.095 Using runtime prefix = /usr
2006-08-04 13:31:35.110 New DB connection, total: 1
2006-08-04 13:31:35.115 Connected to database 'mythconverg' at host: 
localhost
2006-08-04 13:31:35.118 Current Schema Version: 1123
Starting up as the master server.
2006-08-04 13:31:35.123 New DB connection, total: 2
2006-08-04 13:31:35.123 Connected to database 'mythconverg' at host: 
localhost
2006-08-04 13:31:35.125 DVB#0 Using DVB card 0, with frontend 'LG 
Electronics LGDT3303 VSB/QAM Frontend'.
2006-08-04 13:31:35.126 New DB connection, total: 3
2006-08-04 13:31:35.127 Connected to database 'mythconverg' at host: 
localhost
2006-08-04 13:31:35.128 DVB#0 WARNING - Symbol Rate setting (0) is out of 
range (min/max:5056941/10762000)
2006-08-04 13:31:35.145 New DB scheduler connection
2006-08-04 13:31:35.146 Connected to database 'mythconverg' at host: 
localhost
2006-08-04 13:31:35.151 mythbackend version: 0.19.20060121-2 www.mythtv.org
2006-08-04 13:31:35.152 Enabled verbose msgs:  important general
2006-08-04 13:31:35.152 AutoExpire: Found 1 recorders w/max rate of 138 
MiB/min
2006-08-04 13:31:35.153 AutoExpire: Required Free Space: 3.0 GB w/freq: 10 
min
2006-08-04 13:31:37.151 Reschedule requested for id -1.
2006-08-04 13:31:37.200 Scheduled 0 items in 0.0 = 0.05 match + 0.00 place
2006-08-04 13:31:37.202 Seem to be woken up by USER
2006-08-04 13:31:50.775 MainServer::HandleAnnounce Monitor
2006-08-04 13:31:50.776 adding: mythtv as a client (events: 0)
2006-08-04 13:31:50.791 MainServer::HandleAnnounce Monitor
2006-08-04 13:31:50.792 adding: mythtv as a client (events: 1)
2006-08-04 13:31:50.807 MainServer::HandleAnnounce Playback
2006-08-04 13:31:50.808 adding: mythtv as a client (events: 0)
2006-08-04 13:31:50.816 TVRec(1): Changing from None to WatchingLiveTV
2006-08-04 13:31:55.346 TVRec(1): Changing from WatchingLiveTV to None
2006-08-04 13:31:55.381 Finished recording Judge Mathis: channel 1212

mythfrontend
2006-08-04 13:31:46.330 Using runtime prefix = /usr
2006-08-04 13:31:46.362 New DB connection, total: 1
2006-08-04 13:31:46.367 Connected to database 'mythconverg' at host: 
localhost
2006-08-04 13:31:46.368 Total desktop dim: 800x600, with 1 screen[s].
2006-08-04 13:31:46.370 Using screen 0, 800x600 at 0,0
2006-08-04 13:31:46.372 Current Schema Version: 1123
2006-08-04 13:31:46.372 mythfrontend version: 0.19.20060121-2 www.mythtv.org
2006-08-04 13:31:46.373 Enabled verbose msgs:  important general
2006-08-04 13:31:46.634 lang0: eng
2006-08-04 13:31:46.634 lang: eng
2006-08-04 13:31:46.638 lang1: eng
2006-08-04 13:31:46.638 lang: eng
2006-08-04 13:31:46.669 Total desktop dim: 800x600, with 1 screen[s].
2006-08-04 13:31:46.670 Using screen 0, 800x600 at 0,0
2006-08-04 13:31:46.670 Switching to square mode (G.A.N.T.)
mythtv: could not connect to socket
mythtv: No such file or directory
lirc_init failed for mythtv, see preceding messages
2006-08-04 13:31:46.775 Joystick disabled.
2006-08-04 13:31:46.795 Registering Internal as a media playback plugin.
2006-08-04 13:31:46.809 Registering MythDVD DVD Media Handler as a media 
handler
2006-08-04 13:31:46.810 Registering MythDVD VCD Media Handler as a media 
handler
2006-08-04 13:31:46.890 Registering MythMusic Media Handler as a media 
handler
SIP listening on IP Address 192.168.1.104:5060 NAT address 192.168.1.104
SIP: Cannot register; proxy, username or password not set
2006-08-04 13:31:50.745 New DB connection, total: 2
2006-08-04 13:31:50.745 Connected to database 'mythconverg' at host: 
localhost
2006-08-04 13:31:50.761 Connecting to backend server: 192.168.1.104:6543 
(try 1 of 5)
2006-08-04 13:31:50.768 Using protocol version 26
2006-08-04 13:31:50.786 TV: Attempting to change from None to WatchingLiveTV
2006-08-04 13:31:50.800 Using protocol version 26
2006-08-04 13:31:50.944 Disable DPMS
0: start_time: 5859.060 duration: -9223372036854.775
stream: start_time: 65100.668 duration: -9223372036854.775 bitrate=0 kb/s
2006-08-04 13:31:52.442 AFD: Opened codec 0x9277970, id(MPEG2VIDEO) 
type(Video)
2006-08-04 13:31:52.442 NVP: Disabling Audio, params(-1,-1,-1)
2006-08-04 13:31:52.442 NVP: Disabling Audio, params(0,-1,-1)
X Error: BadMatch (invalid parameter attributes) 8
  Major opcode:  141
  Minor opcode:  14
  Resource id:  0x1d6
2006-08-04 13:31:52.757 OSDTypePositionImage::AddPosition[0](80x244  1, 1)
2006-08-04 13:31:52.758 OSDTypePositionImage::AddPosition[1](80x274  1, 1)
2006-08-04 13:31:52.758 OSDTypePositionImage::AddPosition[2](80x304  1, 1)
2006-08-04 13:31:52.758 OSDTypePositionImage::AddPosition[3](80x334  1, 1)
2006-08-04 13:31:52.851 TV: Changing from None to WatchingLiveTV
2006-08-04 13:31:52.868 Realtime priority would require SUID as root.
2006-08-04 13:31:52.968 Video timing method: USleep with busy wait
2006-08-04 13:31:55.328 TV: Attempting to change from WatchingLiveTV to None
2006-08-04 13:31:55.501 TV: Changing from WatchingLiveTV to None
2006-08-04 13:31:55.516 Enable DPMS
Destroying SipFsm object

dmesg
Linux version 2.6.17-1.2142_FC4 (bhcompile at hs20-bc1-4.build.redhat.com) (gcc 
version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Tue Jul 11 22:41:14 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5390
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524272
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 294896 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia                                ) @ 0x000f9270
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x7fff9680
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9780
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff95c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:7 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c077d000 soft=c077e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2211.509 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073332k/2097088k available (1977k kernel code, 22472k reserved, 
1358k data, 212k init, 1179584k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4427.48 BogoMIPS 
(lpj=8854965)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 
00000000 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bf3ff e1d3fbff 00000000 00000410 00000000 
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 0a
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 1187k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:18
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, 
disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, 
disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, 
disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, 
disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a 
report
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:09.0
  IO window: 9000-afff
  MEM window: fdf00000-fdffffff
  PREFETCH window: cc000000-d7ffffff
PCI: Bridge: 0000:00:0b.0
  IO window: 8000-8fff
  MEM window: fde00000-fdefffff
  PREFETCH window: fdd00000-fddfffff
PCI: Bridge: 0000:00:0c.0
  IO window: 7000-7fff
  MEM window: fdc00000-fdcfffff
  PREFETCH window: fdb00000-fdbfffff
PCI: Bridge: 0000:00:0d.0
  IO window: 6000-6fff
  MEM window: fda00000-fdafffff
  PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:0e.0
  IO window: 5000-5fff
  MEM window: c4000000-cbffffff
  PREFETCH window: b8000000-bfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1154692188.624:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 7EEDE88F5E4DFD06
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (22 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HDS728080PLAT20, ATA DISK drive
hdb: Maxtor 4A300J0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HDS728080PLAT20, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, 
UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdb: max request size: 512KiB
hdb: 585940320 sectors (300001 MB) w/2048KiB Cache, CHS=36473/255/63, 
UDMA(133)
hdb: cache flushes supported
hdb: hdb1
hdc: max request size: 512KiB
hdc: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, 
UDMA(133)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 924k
SCSI subsystem initialized
libata version 1.20 loaded.
sata_sil 0000:01:0d.0: version 0.9
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC1] -> GSI 16 (level, low) -> 
IRQ 217
sata_sil 0000:01:0d.0: Applying R_ERR on DMA activate FIS errata fix
ata1: SATA max UDMA/100 cmd 0xF8802080 ctl 0xF880208A bmdma 0xF8802000 irq 
217
ata2: SATA max UDMA/100 cmd 0xF88020C0 ctl 0xF88020CA bmdma 0xF8802008 irq 
217
ata3: SATA max UDMA/100 cmd 0xF8802280 ctl 0xF880228A bmdma 0xF8802200 irq 
217
ata4: SATA max UDMA/100 cmd 0xF88022C0 ctl 0xF88022CA bmdma 0xF8802208 irq 
217
input: AT Translated Set 2 keyboard as /class/input/input0
ata1: SATA link down (SStatus 0)
scsi0 : sata_sil
ata2: SATA link down (SStatus 0)
scsi1 : sata_sil
ata3: SATA link down (SStatus 0)
scsi2 : sata_sil
ata4: SATA link down (SStatus 0)
scsi3 : sata_sil
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> 
IRQ 225
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata5: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 225
ata6: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 225
ata5: SATA link down (SStatus 0)
scsi4 : sata_nv
ata6: SATA link down (SStatus 0)
scsi5 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> 
IRQ 233
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata7: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 233
ata8: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 233
ata7: SATA link down (SStatus 0)
scsi6 : sata_nv
ata8: SATA link down (SStatus 0)
scsi7 : sata_nv
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1154692193.100:2): selinux=0 auid=4294967295
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> 
IRQ 50
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> 
IRQ 217
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 v1.4 addr 0xfdcfc000 irq 217 Yukon-EC (0xb6) rev 1
sky2 eth1: addr 00:16:17:1b:ef:05
snd: no version for "struct_module" found: kernel tainted.
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> 
IRQ 66
ice1724: Invalid EEPROM version 1
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> 
IRQ 74
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 74, latency: 32, mmio: 
0xd7fff000
bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is 
18ac:d500
bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=64
tda9887 2-0043: chip found @ 0x86 (bt878 #0 [sw])
tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 2-0061: type set to 64 (LG TDVS-H062F/TUA6034)
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [APC4] -> GSI 19 (level, low) -> 
IRQ 74
bt878_probe: card id=[0xd50018ac],[ DViCO FusionHDTV 5 Lite ] has DVB 
functions.
bt878(0): Bt878 (rev 17) at 01:09.1, irq: 74, latency: 32, memory: 
0xd7ffe000
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.0 (tagged release) loading
ivtv:  Linux version: 2.6.17-1.2142_FC4 mod_unload 686 REGPARM 4KSTACKS 
gcc-4.0
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> 
IRQ 217
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tveeprom 3-0050: Hauppauge model 26132, rev G1B2, serial# 9519001
tveeprom 3-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is CX25841 (idx 35)
tveeprom 3-0050: decoder processor is CX25841 (idx 28)
tveeprom 3-0050: has no radio, has IR remote
cx25840 3-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
tuner 3-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> 
IRQ 82
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tda9887 4-0043: chip found @ 0x86 (ivtv i2c driver #1)
tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 4-0050: Hauppauge model 26552, rev G168, serial# 8881904
tveeprom 4-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 4-0050: audio processor is CX25843 (idx 37)
tveeprom 4-0050: decoder processor is CX25843 (idx 30)
tveeprom 4-0050: has radio, has no IR remote
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
ivtv1: Create encoder radio stream
tuner 4-0061: type set to 47 (LG NTSC (TAPE series))
ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
ivtv:  ====================  END INIT IVTV  ====================
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> 
IRQ 90
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 90, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> 
IRQ 225
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 225, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> 
IRQ 74
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[74]  MMIO=[fdfff000-fdfff7ff]  
Max Packet=[2048]  IR/IT contexts=[4/8]
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
input: HID 0b38:0010 as /class/input/input1
input: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:02.0-3
input: HID 0b38:0010 as /class/input/input2
input: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:02.0-3
usb 2-8: new low speed USB device using ohci_hcd and address 3
usb 2-8: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Wireless Optical Desktop 1.00 as 
/class/input/input3
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop 
1.00] on usb-0000:00:02.0-8
usb 2-9: new low speed USB device using ohci_hcd and address 4
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000cfd326]
usb 2-9: configuration #1 chosen from 1 choice
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> 
IRQ 66
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 13:06:38 
PDT 2006
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel at redhat.com
EXT3 FS on hda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JFS: nTxBlock = 8192, nTxLock = 65536
audit(1154710220.786:3): audit_pid=2619 old=0 by auid=4294967295
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
eth0: no IPv6 routers present
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
atkbd.c: Unknown key released (translated set 2, code 0x81 on 
isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.




More information about the mythtv-users mailing list