[mythtv-users] Transcoded files playing well in Linux machine but lagging on Windows machine?

[Ramanraj Vamsi]

Hi,

Yes I wanna remove commercials from the recordings!
I am using Hauppauge pvr 150 card and cable box for network.I want to
transcode to mpeg2 itself and mp3 audio.So that after wards I can be able to
convert to 3gp and play in my mobile.

linux:~ # mythtranscode --chanid 1005 --starttime 2006-07-13T16:50 --profile
> autodetect --fifodir . --fifosync &
> [1] 13332
> linux:~ # 2006-07-31 11:35:31.948 Using runtime prefix > 2006-07-31 11:35: 31.958 New DB connection, total: 1
> 2006-07-31 11:35:31.964 Enabled verbose msgs: important
> 2006-07-31 11:35:31.967 New DB connection, total: 2
> 2006-07-31 11:35:31.986 Using protocol version 26
> [mpeg @ 0x40901360]Parser not found for Codec Id: 94210 !
> 0: start_time: 0.036 duration: 5.134
> 1: start_time: 2577.048 duration: 5.152
> 2: start_time: 0.025 duration: 5.115
> stream: start_time: 0.276 duration: 28690.835 bitrate kb/s
> Couldn't create fifo for file: ./vidout
> File exists
> 2006-07-31 11:35:32.068 Error initializing fifo writer.  Aborting!




I think I have given you all the information in both the mails together!
If anything else missing please reply.

Thank you.

On 8/2/06, Vijay Gill <vijay.s.gill at gmail.com> wrote:
>
> On 02/08/06, Ramanraj Vamsi <ramanrajvamsi at gmail.com> wrote:
> >
> >
> > Hi,
> > Thanks for your suggestion.I built Myth tv on SuSE 10.0 through rpms.
> > I wanna have seperate audio and video files for my myth recordings.
> > When I  tried to Transcode my Myth tv recordings  with the command below
> > ...it has given me the error message ......error initializing fifo
> writer
> > ?
> > linux:~ # mythtranscode --chanid 1005 --starttime 2006-07-13T16:50
> --profile
> > autodetect --fifodir . --fifosync &
> > [1] 13332
> > linux:~ # 2006-07-31 11:35:31.948 Using runtime prefix > > 2006-07-31 11:35: 31.958 New DB connection, total: 1
> > 2006-07-31 11:35:31.964 Enabled verbose msgs: important
> > 2006-07-31 11:35:31.967 New DB connection, total: 2
> > 2006-07-31 11:35:31.986 Using protocol version 26
> > [mpeg @ 0x40901360]Parser not found for Codec Id: 94210 !
> > 0: start_time: 0.036 duration: 5.134
> > 1: start_time: 2577.048 duration: 5.152
> > 2: start_time: 0.025 duration: 5.115
> > stream: start_time: 0.276 duration: 28690.835 bitrate kb/s
> > Couldn't create fifo for file: ./vidout
> > File exists
> > 2006-07-31 11:35:32.068 Error initializing fifo writer.  Aborting!
> >
> >  I evev tried to transcode manually but I haven't got any file
> successfully
> > transcoded.So without losing hope I mailed and got a reply saying....
> >
> >  to remove .(dot) from the command .Then I tried ....
>
> Raman,
>
> You have not still mentioned what you want to do. Just mentioning that
> you want separate audio and video files is not enough. You have to
> tell what format (MPEG2, MPEG4 etc) of video file and same goes for
> audio (MP2, MP3 etc). Also you have to mention whether you want to
> remove commercials. After that mention the command that you used
> useself, and their results.
>
> You have not mentioned what tuner card you are using.
>
> In that big mail I could not make heads or tails of anything.
>
>
> Vijay
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060802/c488475a/attachment.htm