[mythtv-users] pvr-150 error

Frank Armstrong farmstrong at gmail.com
Tue Apr 18 01:47:23 UTC 2006


well i am doing a fresh install of FC5 on a brand new machine i built...it
has a AMD 3200+ venice core...2gb ram...soltek mobo...2 pci slots with an
HD3k and winpvr-150, onboard sound, gigabit ethernet...

i was following Jarod's walkthrough..i installed ivtv like it said...and
what i said earlier happened...so i went to ivtvdriver.org and followed the
wiki...i changed my repo...according to that and did the yum install over
again...and the same thing happened...


On 4/17/06, Brian Wood <beww at beww.org> wrote:
>
>
> On Apr 17, 2006, at 6:06 PM, Frank Armstrong wrote:
>
> > this is what i find in between the lines...not sure what all this
> > means...
> >
> > ivtv:  ========== START INIT IVTV ==========
> > ivtv:  version 0.6.1 (development snapshot compiled on Wed Mar 29
> > 19:14:09 2006) loading
> > ivtv:  Linux version: 2.6.16-1.2080_FC5 SMP gcc-4.1
> > ivtv:  In case of problems please include the debug info between
> > ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv:  any module options, when mailing the ivtv-users mailinglist.
> > cx2388x v4l2 driver version 0.0.5 loaded
> > cx2388x dvb driver version 0.0.5 loaded
> > eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0
> > ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
> > GSI 19 sharing vector 0xC9 and IRQ 19
> > ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20
> > (level, low) -> IRQ 19
> > PCI: Setting latency timer of device 0000:00:04.0 to 64
> > nvidia: module license 'NVIDIA' taints kernel.
> > intel8x0_measure_ac97_clock: measured 58531 usecs
> > intel8x0: clocking to 46955
> > i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
> > i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
> > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
> > GSI 20 sharing vector 0xD1 and IRQ 20
> > ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16
> > (level, low) -> IRQ 20
> > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > tveeprom 2-0050: Hauppauge model 26052, rev C185, serial# 2882909
> > tveeprom 2-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
> > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 2-0050: audio processor is CX25843 (idx 37)
> > tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 2-0050: has no radio, has IR remote
> > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
> > Driver (PCI)
> > sd 2:0:0:0: Attached scsi generic sg0 type 0
> > sd 3:0:0:0: Attached scsi generic sg1 type 0
> > cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
> > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ieee1394: Initialized config rom entry `ip1394'
> > firmware_loading_store: unexpected value (0)
> > ivtv0: unable to open firmware v4l-cx2341x-enc.fw
> > ivtv0: did you put the firmware in the hotplug firmware directory?
> > ivtv0 warning: failed loading encoder firmware
> > ivtv0 warning: Error loading firmware -3!
> > ivtv0: Error -3 initializing firmware.
> > ivtv0: Error -12 on initialization
> > ivtv: probe of 0000:01:07.0 failed with error -12
> > ivtv:  ==========  END INIT IVTV  ==========
> >
>
> Strange, this looks very strange. Aside from the log being
> interspersed with non-ivtv stuff in the middle of the ivtv init, it
> seems to be loading a lot of things it doesn't want or need, like dvb
> drivers and firmware.
>
> For what it's worth, here's what a working PVR-150 init looks like:
>
> ivtv:  version 0.4.3 (tagged release) loading
> ivtv:  Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0
> ivtv:  In case of problems please include the debug info between
> ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> ivtv:  any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
> PCI: setting IRQ 9 as level-triggered
> ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKA] -> GSI 9 (level,
> low) -> IRQ 9
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addrP]
> tveeprom 2-0050: Hauppauge model 26032, rev C599, serial# 8383391
> tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
> tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 2-0050: audio processor is CX25841 (idx 35)
> tveeprom 2-0050: decoder processor is CX25841 (idx 28)
> tveeprom 2-0050: has no radio, has IR remote
> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addra]
> cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addrD]
> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr]
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
> total)
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
> total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
> (2048KB total)
> tuner 2-0061: type set to 50 (TCL 2002N)
> ivtv0: Initialized WinTV PVR 150, card #0
>
>
> It looks like your system is trying to init this card as everything
> under the rainbow all at once, it's a pity it doesn't succeed, that
> would be a great card if it could really do all that.
>
> My first suspicion is your IVTV version, you may have got a
> development version on a bad day.
>
> Other than that, we'd need to know more details about the system, how
> and why did you get the kernel/ivtv versions that you have?
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060417/6db01dd3/attachment.htm 


More information about the mythtv-users mailing list