[mythtv-users] Nvidia just released 8756.
Gabe Rubin
gaberubin at gmail.com
Wed Apr 12 15:54:27 UTC 2006
On 4/12/06, Tom Lichti <tom at redpepperracing.com> wrote:
> [quote]
> After some discussion with development, the issue here is likely that
> custom Modelines in an X configuration are not supported for TV-out, and
> were not supported in previous driver releases either. The key
> difference is that in past drivers those custom modelines were silently
> rejected, such that it seemed like they were working, even though they
> were not. This behavior is intentional, as the TV encoders on videocards
> are only capable of programming a limited number of modes.
>
> [/quote]
Well I am not using TV-out. I am using DVI->HDMI->TV.
I ran the verbose command and get this info:
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:0:0:
(--) NVIDIA(0): TSB TSB-H84s (DFP-0)
(--) NVIDIA(0): TSB TSB-H84s (DFP-0): 135 MHz maximum pixel clock
(--) NVIDIA(0): TSB TSB-H84s (DFP-0): Internal Single Link TMDS
(--) NVIDIA(0): TSB TSB-H84s (DFP-0): Native FlatPanel Scaling is supported
(--) NVIDIA(0): TSB TSB-H84s (DFP-0): DFP modes are limited to 60Hz refresh
(--) NVIDIA(0): rate
(--) NVIDIA(0):
(--) NVIDIA(0): --- EDID for TSB TSB-H84s (DFP-0) ---
(--) NVIDIA(0): EDID Version : 1.3
(--) NVIDIA(0): Manufacturer : TSB
(--) NVIDIA(0): Monitor Name : TSB TSB-H84s
(--) NVIDIA(0): Product ID : 257
(--) NVIDIA(0): 32-bit Serial Number : 0
(--) NVIDIA(0): Serial Number String :
(--) NVIDIA(0): Manufacture Date : 2004, week 0
(--) NVIDIA(0): DPMS Capabilities :
(--) NVIDIA(0): Prefer first detailed timing : Yes
(--) NVIDIA(0): Supports GTF : No
(--) NVIDIA(0): Maximum Image Size : 1960mm x 1420mm
(--) NVIDIA(0): Valid HSync Range : 15kHz - 46kHz
(--) NVIDIA(0): Valid VRefresh Range : 59Hz - 61Hz
(--) NVIDIA(0):
(--) NVIDIA(0): Detailed Timings:
(--) NVIDIA(0): 1920 x 1080 @ 60Hz
(--) NVIDIA(0): Pixel Clock : 74.25 MHz
(--) NVIDIA(0): HRes, HSyncStart : 1920, 2008
(--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200
(--) NVIDIA(0): VRes, VSyncStart : 540, 542
(--) NVIDIA(0): VSyncEnd, VTotal : 547, 562
(--) NVIDIA(0): H/V Polarity : +/+
(--) NVIDIA(0): Extra : Interlaced
*****snip*****
(--) NVIDIA(0): CEA-861B Timings:
(--) NVIDIA(0): 1920 x 1080 @ 60Hz
(--) NVIDIA(0): Pixel Clock : 74.18 MHz
(--) NVIDIA(0): HRes, HSyncStart : 1920, 2008
(--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200
(--) NVIDIA(0): VRes, VSyncStart : 540, 542
(--) NVIDIA(0): VSyncEnd, VTotal : 547, 562
(--) NVIDIA(0): H/V Polarity : +/+
(--) NVIDIA(0): Extra : Interlaced
(--) NVIDIA(0): CEA Format : 5
I am kind of new to the modeline thing. How do I convert this info
into a useable modeline?
Thanks
More information about the mythtv-users
mailing list