[mythtv-users] Fedora core 5 no audio watch recording

David Highley dhighley at highley-recommended.com
Wed Apr 5 03:56:16 UTC 2006


New installation of Fedora core 5 and mythtv-suite-0.19-57.at. Sound
card is a Creative Sound Blaster Live card. Did not experience issues
with intall and the only using issue seems to be audio when watching a
recording. When watching TV the audio works. I have tried to play the
recorded nuv files with mplayer but it aborts.

========================================================
uname -a:
Linux redwood 2.6.16-1.2080_FC5 #1 SMP Tue Mar 28 03:38:47 EST 2006
x86_64 x86_64 x86_64 GNU/Linux

========================================================
dmesg snippet:
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level,
low) -> IRQ 19
bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 19, latency: 32, mmio:
0xe0000000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is
1002:0003
bttv0: using: ATI TV-Wonder VE [card=64,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=19
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 2-0060: All bytes are equal. It is not a TEA5767
tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 2-0060: type set to 19 (Temic PAL* auto (4006 FN5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 20
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC2] -> GSI 17 (level,
low) -> IRQ 19
bt878_probe: card id=[0x31002], Unknown card.
Exiting..
bt878: probe of 0000:02:09.1 failed with error -22
.
.
.
application mythfrontend uses obsolete OSS audio interface
.
.
.
application mythbackend uses obsolete OSS audio interface


=======================================================
lsmod:
snd_emu10k1_synth      40513  0
snd_emux_synth         69313  1 snd_emu10k1_synth
snd_seq_virmidi        40897  1 snd_emux_synth
snd_seq_midi_emul      39617  1 snd_emux_synth
bt878                  45705  0
snd_emu10k1           153797  1 snd_emu10k1_synth
snd_rawmidi            61249  2 snd_seq_virmidi,snd_emu10k1
snd_ac97_codec        136089  1 snd_emu10k1
snd_ac97_bus           35777  1 snd_ac97_codec
tuner                  86265  0
snd_seq_dummy          37061  0
bttv                  239541  1 bt878
snd_seq_oss            66241  0
snd_seq_midi_event     41025  2 snd_seq_virmidi,snd_seq_oss
snd_seq                89825  8
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            85457  0
snd_mixer_oss          50881  1 snd_pcm_oss
snd_pcm               126409  3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
video_buf              57029  1 bttv
snd_seq_device         42833  7
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_timer              59465  3 snd_emu10k1,snd_seq,snd_pcm
emu10k1_gp             37185  0
gameport               50385  2 emu10k1_gp
snd_page_alloc         44497  2 snd_emu10k1,snd_pcm
snd_util_mem           38593  2 snd_emux_synth,snd_emu10k1
snd_hwdep              44361  2 snd_emux_synth,snd_emu10k1
snd                    97129  13
snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
soundcore              44129  1 snd
compat_ioctl32         41665  1 bttv
i2c_algo_bit           42185  1 bttv
v4l2_common            42561  3 tuner,bttv,compat_ioctl32
btcx_risc              38089  1 bttv
ir_common              43461  1 bttv
tveeprom               49617  1 bttv
videodev               44865  1 bttv
i2c_nforce2            40769  0
i2c_core               57409  5
tuner,bttv,i2c_algo_bit,tveeprom,i2c_nforce2

===================================================
mplayer:
 mplayer -zoom -quiet -vo xv /var/cache/mythtv/1068_20060402130000.nuv
 MPlayer 1.0pre7try2-3.2.3 (C) 2000-2005 MPlayer Team
 CPU: Advanced Micro Devices  (Family: 8, Stepping: 0)
 Detected cache-line size is 64 bytes
 CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1


 Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
 Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
 startup scripts.
 Opening joystick device /dev/input/js0
 Can't open joystick device /dev/input/js0 : No such file or directory
 Can't init input joystick
 Setting up LIRC support...
 mplayer: could not connect to socket
 mplayer: No such file or directory
 Failed to open LIRC support.
 You will not be able to use your remote control.
 Playing /var/cache/mythtv/1068_20060402130000.nuv.
 NuppelVideo file format detected.
 Detected MythTV stream, reading extended format information
 FOURCC: GPJR
 channels=2 bitspersample=16 samplerate=44100 audio_compression_ratio=0
 ==========================================================================
 Opening audio decoder: [pcm] Uncompressed PCM audio decoder
 AUDIO: 44100 Hz, 2 ch, s16le, 0.0 kbit/0.00% (ratio: 0->176400)
 Selected audio codec: [pcm] afm:pcm (Uncompressed PCM)
 ==========================================================================
 vo: couldn't open the X11 display ()!
 Error opening/initializing the selected video_out (-vo) device.


More information about the mythtv-users mailing list