[mythtv-users] Using the pvr-350 remote with other ir-receivers

[Oscar Curero]

El Dimarts, 20 de Setembre de 2005 01:05, Scot L. Harris va escriure:

> > > Which OS are you using?  Which version of lirc?
> >
> > SuSE 9.3. Now using a CVS snapshot but I used to use lirc 0.7.0.
>
> I have one system using 0.7.0 and the new one has 0.7.2.
>
> > > Did you use Jarod's guide for setting up the remote?  Does irw work?
> >
> > No, irw does not work.
>
> If you have not, read the section in Jarod's guide on setting up lirc
> and the remote.  He makes it very easy.

It doesn't work. :(

The only strange thing I see is this:
DMESG OUTPUT:
kobject_register failed for tveeprom (-17) <-------------------------
 [<c01d0567>] kobject_register+0x37/0x40
 [<c02354ed>] bus_add_driver+0x3d/0xa0
 [<c0235a18>] driver_register+0x28/0x30
 [<dd67647a>] i2c_add_driver+0x3a/0xc0 [i2c_core]
 [<c012e9a4>] sys_init_module+0x104/0x180
 [<c0102c49>] sysenter_past_esp+0x52/0x79
load_module: err 0xfffffffe (dont worry)
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach to card #0 ok [client=Hauppauge IR, addr=18]
lirc_dev: lirc_register_plugin:sample_rate: 10

As you can see, it's detected but not working.

>
> Like I said, read Jarod's guide on this.  Should be virtually the same
> for Suse.  Verify that you have the drivers loaded.  Does irw give you
> any errors?
No errors at all. Nothing happens when I press the buttons, no errors or 
warnings...

I forgot to add that neither lirc nor the other way (using the remote without 
lirc and use ir-kbd-i2c to generate keystroke) work. How can I know if 
lirc_i2c is loaded after the ivtv module?

Thanks,
-- 
Oscar Curero - Linux user: 306877
--    GPG keyID: 0xE0EA0B24    -- 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20050920/8e428bea/attachment.pgp