[mythtv-users] Setting up slave backend system
Scot L. Harris
webid at cfl.rr.com
Mon Sep 19 17:26:00 UTC 2005
On Mon, 2005-09-19 at 09:40, Nick wrote:
> On 19/09/05, Scot L. Harris <webid at cfl.rr.com> wrote:
> > If this was done on the SBE should this be deleted? On the first couple
> > of passes at this I skipped the step of creating video sources but when
> > I tried to setup the input connections the only option was none.
>
> I would think so. You need to make sure you do not have the SBE
> connecting to MySQL on the SBE but on the machine where the DB is
> (likely the MBE). Can you connect to the database successfully on the
> MBE from the command line on the SBE (using the mythtv
> login/password)?
>
> $ mysql -h $DBSERVER -u mythtv -pmythtv mythconverg
>
> where $DBSERVER is the IP/name of the machine where the mythtv database is.
>
Confirmed that I was able to connect to the mysql database on the MBE
from the SBE system.
> Also make sure a firewall is not blocking access to the MBE for MySQL
> if the above does not work.
Had already made sure of that.
In the mythtvsetup on the SBE I specify the MBE IP address.
Maybe what is confusing me is how to get the capture cards on the SBE
configured on the MBE.
I run mythtvsetup on the SBE and can see the cards there.
But when I try to assign the video sources on the SBE (in mythtvsetup)
there is no choice for my cable listing. I confirmed that the SBE
backend connects to the MBE.
If I run mythtvsetup on the MBE and try to configure a new capture card
it looks like it lists the same cards. Maybe this is what I am getting
confused. On both systems there are /dev/video0 and /dev/video1. But
in the mythtvsetup there is nothing that I see that indicates that any
of these would be on the SBE.
Does that make sense?
More information about the mythtv-users
mailing list