[mythtv-users] PVR250 & PVR500 with only static

[Bryan (Myth)]

OK,
I need some help. I have two 250's and a 500mce in the same machine and I
am only getting static. Below is some info that may be of some help. I
have searched the mailiing list and have gotten a few ideas for the
modprobe.conf file from there but I am just lost.

I know there is some little thing that I am missing. Please help as it is
much appreciated.

rpm info
--------
ivtv-0.3.7d-95.rhfc2.at
ivtv-firmware-enc-2.04.024-4.at
ivtv-firmware-dec-2.02.023-4.at
perl-Video-ivtv-0.13-6.rhfc2.at
perl-Video-ivtv-0.13-7.rhfc2.at
ivtv-firmware-audio-0.0.1-1.at
ivtv-kmdl-2.6.10-1.771_FC2-0.3.7d-95.rhfc2.at


modprobe.conf
--------------
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-81-2 ivtv
alias char-major-81-3 ivtv
alias tveeprom tveeprom-ivtv
alias tuner tuner-ivtv
alias msp3400 msp3400-ivtv
options cx25480 i2c_enable=-1,-1,1,1 no_black_magic=1
options saa7115 i2c_enable=1,1,-1,-1

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC15 based chip
ivtv: XXX PCI device: 0x2501 vendor: 0x8086
msp34xx: ivtv version
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: i2c attach [client=tveeprom,ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model
0x00a51450, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: i2c attach [client=saa7115,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by
ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 3989, itv = 0xe0c591a0
ivtv: Initialized WinTV PVR 250, card #0
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ivtv: XXX PCI device: 0x2501 vendor: 0x8086
msp34xx: ivtv version
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: i2c attach [client=tveeprom,ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
ivtv: i2c attach [client=saa7115,ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model
0x00891493, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by
ivtv i2c driver #1
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 4050, itv = 0xe0c6d640
ivtv: Initialized WinTV PVR 250, card #1
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: XXX PCI device: 0x2501 vendor: 0x8086
ivtv: i2c attach [client=wm8775,ok]
ivtv: i2c attach [client=tveeprom,ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005)
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: i2c attach [client=cx25840,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 2
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 34
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 226
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 26
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 66
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #2
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 4125, itv = 0xe0c81ae0
ivtv: XXX PCI device: 0x2501 vendor: 0x8086
ivtv: i2c attach [client=wm8775,ok]
ivtv: i2c attach [client=tveeprom,ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #3
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #3 (0x10005)
ivtv: i2c attach [client=cx25840,ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 3
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 35
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 227
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 27
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 67
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #3
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #3
ivtv: ====================  END INIT IVTV  ====================