[mythtv-users] ivtv 4.x compatible with HD-3000 DVB?

[ToadMazter]

Hmmm.... actually I just saw some output after exiting mythtvsetup that
probably is the problem.
 Couldn't open /dev/video0 to probe its inputs.
Couldn't open /dev/video1 to probe its inputs.
 I assumed this is a another permissions issue so I tried running
mythtvsetup as root. Sure enough, I could setup the card as expected. What
is the command or file I need to edit to give permission to the mythtv user
to use the videoX devices? The official docs reference instructions for
Mandrake, but I am on FC4.

Thanks!


 On 10/14/05, ToadMazter <toadmazter at gmail.com> wrote:
>
> Thanks for all the replies and help. I'm still having a problem it seems
> with the PVR 500. I was able to install th ivtv 0.4.x drivers, and had to
> replace the tveeprom-ivtv.ko file with the tveeprom from the kernel in
> order for the HD-3000 to work again. I also then had to edit
> modules.pcimap and make the cx88_dvb line come before the cx_88_blackbird
> line so that the DVB driver would load at startup.
>  Now when I attempt to setup my capture cards in mythtvsetup, for the
> PVR-500 I select "MPEG-2" as the card type and "/dev/video0" for the device,
> but I am not offered a choice in the defult input list, it is just blank. I
> was expecting to see "tuner0". If I save the card and go back in, it lists
> the input as "Television", but I can't assign a Video Source to it. How
> should I troubleshoot this?
>  ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.0 (tagged release) loading
> ivtv: Linux version: 2.6.13-1.1526_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based)
> ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 177
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8428663
> tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3410D (type = 5)
> ivtv0: This is the first unit of a PVR500
> tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
> TEA5767 detected.
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
> tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
> type set to 62 (Philips TEA5767HN FM Radio)
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
> ivtv0: loading /lib/modules/ivtv-fw-enc.bin
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
>
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> ivtv0: Create encoder radio stream
> tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based)
> ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 16 (level, low) -> IRQ 201
> ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
> ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> cx25840 2-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
> ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
> ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
> tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8428663
> tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3410D (type = 5)
> ivtv1: This is the second unit of a PVR500
> ivtv1: Correcting tveeprom data: no radio present on second unit
> ivtv1: loading /lib/modules/ivtv-fw-enc.bin
> ivtv1: Encoder revision: 0x02050032
> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
>
> ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> ivtv: ==================== END INIT IVTV ====================
>   Thanks for the help!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051014/61678171/attachment.htm