[mythtv-users] PVR-350 TV-Out with Xv support

[Jeff Simpson]

works now, Here's what I had to put in XF86Config:

Driver "ivtvdev"
Option "fbdev" "/dev/fb2"
BusID "PCI:0:10:0"

I apparently had ivtvdev_drv at one point, had removed the other options at
one point, and /dev/fb/2 at one point, so once I got all the ducks in a row,
it worked like a dream!

On 10/6/05, Jeff Simpson <llcooljeff at gmail.com> wrote:
>
> I got ivtv-fb back - turns out the ebuild is a little buggy. I got the
> framebuffer device back, I had to modprobe ivtv cardtype=2 to get ivtv-fb to
> load
>
> but still no fbdev or ivtvdev_drv working in X, same error about not
> having a "ModuleData data object"
>
> - Jeff
>
> On 10/6/05, Jeff Simpson <llcooljeff at gmail.com> wrote:
> >
> > HELP!!
> >
> > I recompiled and installed ivtv 0.3.8, x.org <http://x.org> 6.8.2-r5 and
> > the 0.10.6 xdriver. they all compiled perfectly, but now I can't get
> > tvout to work.
> >
> > Symptoms:
> >
> > ivtv-fb is missing now. It's not in ivtv-0.3.8, so I assume it got
> > replaced by some other module? What should I be loading?
> >
> > What changes do I need to make to XF86Config to make X happy? I tried
> > using ivtv_drv, ivtvdev_drv, fbdev and fbdev_drv, and I get the following:
> >
> > (EE) LoadModule: Module ivtvdev_drv does not have a
> > ivtvdev_drvModuleData data object.
> > (EE) Failed to load module "ivtvdev_drv" (invalid module, 0)
> > (EE) No devices detected.
> >
> > Thanks!!
> >
> > - Jeff
> >
> > On 10/6/05, Jeff Simpson <llcooljeff at gmail.com > wrote:
> > >
> > > On 10/5/05, R. Geoffrey Newbury <newbury at mandamus.org> wrote:
> > > >
> > > > On Wed, 5 Oct 2005 16:34:21 -0400, Jeff Simpson wrote:
> > > >
> > > > You might check out: http://groundstate.ca/c3mythtv
> > > >
> > > > Down a ways there is a discussion about compiling the Xv, and XVmc
> > > > drivers
> > > > for a VIA motherboard... But the process will be exactly the same
> > > > for you
> > > > to do in gentoo, subject only to a choice of the difference video
> > > > driver
> > > > you are applying it to.
> > >
> > >
> > > I'll take a peek at that. I'm pretty sure the problems I'm having have
> > > to do with version numbers or strange things about gentoo that don't work
> > > right, but I'll see if it helps any.
> > >
> > > There is another gotcha if you are doing this from source and that is
> > > > that
> > > > if you are using an oddly named kernel, the modules will get built
> > > > under
> > > > /lib/modules in a folder called something like 2.6.12-12custom...
> > > > You
> > > > have to move the drivers to the correct place which is something
> > > > like
> > > > /lib/modules/2.6.12-12mdk-i686-4GB-up/kernel/drivers etc etc etc...
> > > >
> > > > The compiling itself is nothing... But note, you may have to
> > > > re-compile X
> > > > from scratch in order to make this work... Not difficult but
> > > > time-consuming.. Takes about 1 and three quarter hours on my Via
> > > > SP13000
> > > > box...Definitely a start and go to lunch project.
> > >
> > >
> > > Yeah, it's gentoo, so I'm used to that ;-P I'm trying to work it all
> > > into an ebuild so I can do the whole thing unattended, but I need to be able
> > > to do it manually first, I think.
> > >
> > > > Geoffrey
> > > >
> > > >
> > > > PS... I noticed that you inadvertantly spelt your first name wrong!
> > > > PPS... Unless you live in the Toronto or Ottawa area (in which case
> > > > you
> > > > might be one of the ones I already know) you are the 4th distinct
> > > > Jeff
> > > > Simpson I have run across... it's almost as bad as being a Colin
> > > > Campbell!
> > > >
> > >
> > > Googlism has a lot to say about "Jeff Simpson" including that I'm a
> > > Hero in Cuba, I am leaving MIT to take a job at UNH (ironic since I do in
> > > fact work at MIT....a previous Jeff Simpson that worked at MIT as a chem
> > > professor is now working at UNH). It's also worth noting that jeff simpson
> > > is a graduate of the wealth barber school of journalism, a disco king in his
> > > native land of gouzenko, and an educational consultant based in ukiah. He is
> > > also published by bbc worldwide and is available now, is now offering tai
> > > chi classes at unity, and is on trial.
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051007/edd81131/attachment.htm