[mythtv-users] Lost /dev/video0 after update

[Javier Perez]

hi.

I did a yum -y update of my system and now I lost /dev/video0. I cannot
record, i cannot watch live tv.

I have a PVR250 and it was working fine.

Here is my IVTV content
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.8 (tagged release) loading
ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK1] -> GSI 9 (level, low) ->
IRQ 9
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 32062, rev = C182, serial# = 7913909
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP3445 (type = c)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler
(G) no-thread mode
msp34xx: $Id$ compiled on: Sep 12 2005 19:13:59
ivtv: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02040024
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner 0-0061: type set to 39 (LG NTSC (newer TAPC series))
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================

Also, after trying to watch /dev/video0 using mplayer, I get at the end of
dmesg the following:

ivtv warning: ENC: REG_DMAXFER 2 wait failed
ivtv warning: DEC: REG_ENCSG1LEN wait failed
ivtv warning: ENC: DMA still Pending while stopping capture!

How can I troubleshoot and solve this? I do not want to reinstall from 0

thanks!


--
------------------------------
/\_/\
|O O| pepebuho at pananet.com
~~~~ Javier Perez
~~~~ While the night runs
~~~~ toward the day...
m m Pepebuho watches
from his high perch.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051003/354d4e13/attachment.htm