[mythtv-users] FC4, Multiple Tuner (PVR-250,
PVR-350) Help with sound config
rod451 at gmx.net
Tue Nov 8 01:14:47 EST 2005
On Mon, Nov 07, 2005 at 08:10:08AM +0100, Rudy Zijlstra wrote:
> Rod wrote:
> >On Sun, Nov 06, 2005 at 11:47:30PM +0100, Rudy Zijlstra wrote:
> >>Rod wrote:
> >>>I've been happily using MythTv with one tuner (PVR-250) for quite a
> >>>while. Now I have decided to add another tuner (PVR-350).
> >>>How does one configure it so that sound is working for both cards?
> >>>I can get one or the other working but not both. I've used Jarrod's
> >>>instructions resulting in the following modprobe.conf
> >>You do not tell us which version of ivtv you are using. Try 0.4.0 or
> >>0.4.1 and tell us the result. And include the ivtv messages in
> >>/var/log/messages if you still have problems...
> >Sorry, I'm not used to including a long log listing in a first post to
> >a mailing list. Normally it gets me into trouble. :-) I'm using 0.4.0.
> >Here's the output where the msp3400.ko was commented out
> >Nov 6 16:10:32 mythbox kernel: msp34xx: ivtv version
> >Nov 6 16:10:32 mythbox kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM
> >support, simple (D) mode, simpler (G) no-thread mode Nov 6 16:10:32
> >mythbox kernel: msp34xx: $Id$ compiled on: Oct 21 2005 02:12:13
> >Nov 6 16:10:33 mythbox kernel: ivtv0: i2c attach to card #0 ok
> >[client=MSP3448W-A2, addr=40]
> >Nov 6 16:10:33 mythbox kernel: tda9885/6/7: chip found @ 0x86 Nov 6
> >16:10:33 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=tda9887,
> >Nov 6 16:10:33 mythbox kernel: ivtv0: Failed to load module msp3400
> >Nov 6 16:10:35 mythbox kernel: msp34xx: $Id$ compiled on: Oct 21 2005
> >Nov 6 16:10:35 mythbox kernel: ivtv1: i2c attach to card #1 ok
> >[client=MSP3445G-B8, addr=40]
> >Nov 6 16:10:35 mythbox kernel: ivtv1: Failed to load module msp3400
> >Still only get sound from one of the cards.
> You're having problems with the msp3400 module. Remove the alias you've
> likely setup and try either with the msp3400 from the kernel, or replace
> the kernel module with the ivtv module.
It appears so but I'm still not sure how to fix this. I tried
unloading/loading both the msp3400 and msp3400-ivtv with no success.
The sound output still keeps switching from the 250 to the 350 but I
cannot get sound out of both for the same module configuration.
> I am not an FC expert (have never liked the RedHat distro's), so can't
> tell you how to remove the alias
Neither am I. I'm using Fedora because there are instructions
available. I would use a different distro if it might prove easier to
configure, get working and maintain.
Is a PVR-250/350 combination known to work?
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users