[mythtv-users] Multiple ATI Remote Wonders

[Robert Johnston]

On 03/11/05, Mercury Morris <mercury.morris at gmail.com> wrote:
> Here's my (failed) attempt to setup multiple ATI Remote Wonders
>  on multiple systems:
>
>  1. Added this line to /etc/modprobe.conf
>
>      options lirc_atiusb unique=1 debug=1 mask=0x0002
>
>  2. Pressed and held the "hand" key until the LED began to blink,
>      Pressed the 2 key, then Pressed the "hand" key again
>
>  3. Re-booted the system
>
>  Here's what didn't work:
>
>  1. Entries in /var/log/messages showed "data received" messages,
>      but the MythTV screens didn't change as keys were pressed
>
>  2. No debug messages printed by the "dprintk" subroutine
>      in lirc_atiusb.c were ever displayed - making debugging difficult!
>
>  I went through the documentation in the lirc-0.7.2 package,
>  reading "lircd.conf.atiusb", and read the output from the command,
>  "modinfo lirc_atiusb".  I don't see where I went wrong, or left anything
> out.
>
>  It's gotten too late today to continue debugging this.  That is, recordings
>  are scheduled in the next two hours.  Restoring the previous
> /etc/modprobe.conf
>  restored the machine to normal operation after another reboot.
>  I'll continue tomorrow and into the weekend.

Tried seeing what irw reports as you press keys on the remote?
--
Robert "Anaerin" Johnston