[mythtv-users] PVR-350 test-image fails
mythtv
mythtv at vigoer.com
Tue May 31 18:31:49 UTC 2005
John Harvey wrote:
>Is this for PAL or NTSC?
>Sounds like you may be needing PAL but it's configured
>for NTSC?
>I'm not sure what version of ivtv you are using but
>assuming it's recent then you can try adding the
>ivtv_std paramanter to the options to force the
>setting (ivtv_std=2 for pal).
>Note this is from memory since i'm at work but i think
>that is the correct parameter name.
>
>john
>--- mythtv <mythtv at vigoer.com> wrote:
>
>
John, I'm using PAL, or rather should do. I use ivtv version 0.2.0 (rc3j).
In my modprobe.conf I have these ivtv parameters:
options ivtv ivtv_std=2 tda9887=0
So I guess this ought to do the trick, unless for some reason this line
is not activated. But you might be right, as the ivtv init output
(entire output shown at the end of this reply) first says:
May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting NTSC video Standard
but then at the very bottom:
May 30 21:52:57 dhcppc3 kernel: ivtv: Switching standard to PAL.
May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_enc_thread: pid = 2040, itv =
0xded190a0
May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_dec_thread: pid = 2041, itv =
0xded190a0
May 30 21:52:57 dhcppc3 kernel: saa7115: decoder set norm PAL
May 30 21:52:57 dhcppc3 kernel: saa7115: set audio: 0x01
May 30 21:52:57 dhcppc3 kernel: saa7127: Setting Encoder Video Standard
May 30 21:52:57 dhcppc3 kernel: saa7127: Set PAL Video Mode
May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting PAL video Standard
I have not been able to find others with this problem with this
flickering test image. Normally people either have a blank screen or it
just works :(
As it has worked for me before, I know the card is o.k., the cabling
also o.k., and the modprobe.conf identical and also the xorg.conf
likewise (presently I am testing with a VGA output xorg.conf though).
Regards
Mogens
May 30 21:52:57 dhcppc3 kernel: ivtv: ==================== START INIT
IVTV ====================
May 30 21:52:57 dhcppc3 kernel: ivtv: version 0.2.0 (rc3j) loading
May 30 21:52:57 dhcppc3 kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686
REGPARM 4KSTACKS gcc-3.4
May 30 21:52:57 dhcppc3 kernel: ivtv: In case of problems please include
the debug info
May 30 21:52:57 dhcppc3 kernel: ivtv: between the START INIT IVTV and
END INIT IVTV lines when
May 30 21:52:57 dhcppc3 kernel: ivtv: mailing the ivtv-devel mailinglist.
May 30 21:52:57 dhcppc3 kernel: ivtv: Autodetected WinTV PVR 350 card
May 30 21:52:57 dhcppc3 kernel: ivtv: Found an iTVC15 based chip
May 30 21:52:57 dhcppc3 kernel: ACPI: PCI Interrupt Link [LNKB] enabled
at IRQ 11
May 30 21:52:57 dhcppc3 kernel: ACPI: PCI interrupt 0000:00:09.0[A] ->
GSI 11 (level, low) -> IRQ 11
May 30 21:52:57 dhcppc3 kernel: ivtv: Unreasonably low latency timer,
setting to 64 (was 32)
May 30 21:52:57 dhcppc3 kernel: ivtv: VIA PCI device: 0x3148 vendor: 0x1106
May 30 21:52:57 dhcppc3 kernel: tveeprom: Hauppauge: model = 48139, rev
= K257,serial# = 2932143
May 30 21:52:57 dhcppc3 kernel: tveeprom: tuner = Philips FM1216 ME MK3
(idx = 57, type = 38)
May 30 21:52:57 dhcppc3 kernel: tveeprom: tuner fmt = PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
May 30 21:52:57 dhcppc3 kernel: tveeprom: audio_processor = CS5331 (type
= 9)
May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=tveeprom[0],ok]
May 30 21:52:57 dhcppc3 kernel: ivtv: Tuner Type 38, Tuner formats
0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001
May 30 21:52:57 dhcppc3 kernel: ivtv: Radio detected
May 30 21:52:57 dhcppc3 kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2cdriver #0
May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=(tuner unset),ok]
May 30 21:52:57 dhcppc3 kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
May 30 21:52:57 dhcppc3 kernel: saa7115: detecting saa7115 client on
address 0x42
May 30 21:52:57 dhcppc3 kernel: saa7115: writing init values
May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=saa7115[0],ok]
May 30 21:52:57 dhcppc3 kernel: saa7115: status: (1E) 0x00, (1F) 0x40
May 30 21:52:57 dhcppc3 kernel: saa7127: Ignoring new-style parameters
in presence of obsolete ones
May 30 21:52:57 dhcppc3 kernel: saa7127: video encoder driver version V
0.3 loaded
May 30 21:52:57 dhcppc3 kernel: saa7127: detecting saa7127 client on
address 0x88
May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting NTSC video Standard
May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting S-Video+Composite
May 30 21:52:57 dhcppc3 kernel: saa7127: Turn WSS off
May 30 21:52:57 dhcppc3 kernel: saa7127: Widescreen Mode 4:3 Full Format
May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting Normal Encoder Input
May 30 21:52:57 dhcppc3 kernel: saa7127: Enable Video Output
May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=saa7127[0],ok]
May 30 21:52:57 dhcppc3 kernel: msp34xx: ivtv version
May 30 21:52:57 dhcppc3 rpcidmapd: rpc.idmapd startup succeeded
May 30 21:52:57 dhcppc3 kernel: msp34xx: init: chip=MSP3418W-B3, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
May 30 21:52:57 dhcppc3 kernel: msp34xx: $Id$ compiled on: May 19 2005
04:40:44
May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=MSP3418W-B3,ok]
May 30 21:52:57 dhcppc3 kernel: tda9885/6/7: chip found @ 0x86
May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=tda9887,ok]
May 30 21:52:57 dhcppc3 kernel: ivtv: Encoder revision: 0x02040024
May 30 21:52:57 dhcppc3 kernel: ivtv: Encoder Firmware may be buggy, use
version 0x02040011
May 30 21:52:57 dhcppc3 kernel: ivtv: Decoder revision: 0x02020023
May 30 21:52:57 dhcppc3 kernel: ivtv: Configuring WinTV PVR 350 card
with 9 streams
May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 0 using 256
16384 byte buffers 4194304 kbytes total
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
0 minor 0
May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 1
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
1 minor 32
May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 2 using 40 52224
byte buffers 2097152 kbytes total
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
2 minor 224
May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 3 using 455 4608
byte buffers 2097152 kbytes total
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
3 minor 24
May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 4
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
4 minor 64
May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 5 using 16 65536
byte buffers 1048576 kbytes total
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
5 minor 16
May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 6 using 1024 2048
byte buffers 262144 kbytes total
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
6 minor 228
May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 7
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
7 minor 232
May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 8
May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype
8 minor 48
May 30 21:52:57 dhcppc3 kernel: ivtv: Setting Tuner 38
May 30 21:52:57 dhcppc3 kernel: tuner: type set to 38 (Philips PAL/SECAM
multi (FM1216ME MK3)) by ivtv i2c driver #0
May 30 21:52:57 dhcppc3 kernel: saa7115: decoder set input (4)
May 30 21:52:57 dhcppc3 kernel: saa7115: now setting Composite input
May 30 21:52:57 dhcppc3 kernel: ivtv: Setting audio matrix to input 3,
output 1
May 30 21:52:57 dhcppc3 kernel: ivtv: Switching standard to PAL.
May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_enc_thread: pid = 2040, itv =
0xded190a0
May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_dec_thread: pid = 2041, itv =
0xded190a0
May 30 21:52:57 dhcppc3 kernel: saa7115: decoder set norm PAL
May 30 21:52:57 dhcppc3 kernel: saa7115: set audio: 0x01
May 30 21:52:57 dhcppc3 kernel: saa7127: Setting Encoder Video Standard
May 30 21:52:57 dhcppc3 kernel: saa7127: Set PAL Video Mode
May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting PAL video Standard
May 30 21:52:58 dhcppc3 kernel: ivtv: Initialized WinTV PVR 350, card #0
May 30 21:52:58 dhcppc3 kernel: ivtv: ==================== END INIT
IVTV ===
More information about the mythtv-users
mailing list