[mythtv-users] DVB Devices
A Thomson
alunt2003 at yahoo.com
Sun May 22 22:14:42 UTC 2005
Hmm,didn't work. I even re-booted Windows style.
I'm still getting "Could not open card #0!". I did compile mythtv with the
DVB flag so i don't why it can't open the card?
I think i have all the drivers loaded:
Module Size Used by
snd_pcm_oss 50080 0
snd_mixer_oss 18944 1 snd_pcm_oss
snd_seq_oss 36096 0
snd_seq_midi_event 7168 1 snd_seq_oss
snd_seq 53648 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8332 2 snd_seq_oss,snd_seq
ohci_hcd 20360 0
dvb_ttpci 85296 0
dvb_core 79400 1 dvb_ttpci
saa7146_vv 48000 1 dvb_ttpci
saa7146 16684 2 dvb_ttpci,saa7146_vv
v4l1_compat 14852 1 saa7146_vv
ves1820 6532 1 dvb_ttpci
stv0299 10884 1 dvb_ttpci
tda8083 6788 1 dvb_ttpci
stv0297 9728 1 dvb_ttpci
sp8870 8204 1 dvb_ttpci
ves1x93 7428 1 dvb_ttpci
ttpci_eeprom 3456 1 dvb_ttpci
nvidia 3919100 12
snd_intel8x0 30528 0
snd_ac97_codec 76536 1 snd_intel8x0
snd_pcm 85380 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 22916 2 snd_seq,snd_pcm
snd 50660 9
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 8672 1 snd
snd_page_alloc 8836 2 snd_intel8x0,snd_pcm
ehci_hcd 30344 0
usbhid 26496 0
uhci_hcd 31248 0
usbcore 108152 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
video_buf 18564 1 saa7146_vv
firmware_class 8960 2 dvb_ttpci,sp8870
v4l2_common 5760 1 saa7146_vv
btcx_risc 5000 0
lirc_i2c 8196 1
lirc_dev 12812 1 lirc_i2c
msp3400 28728 0
saa7127 13852 0
saa7115 13336 0
tuner 21540 0
tveeprom 12340 0
ivtv 819172 2
i2c_algo_bit 9992 1 ivtv
i2c_core 19968 15
dvb_ttpci,ves1820,stv0299,tda8083,stv0297,sp8870,ves1x93,ttpci_eeprom,lirc_i2c,msp3400,saa7127,saa7115,tuner,tveeprom,i2c_algo_bit
videodev 8704 2 saa7146_vv,ivtv
sk98lin 175584 0
----- Original Message -----
From: "David Armstrong" <stretch at flat24.org>
To: "Discussion about mythtv" <mythtv-users at mythtv.org>
Sent: Sunday, May 22, 2005 10:52 PM
Subject: Re: [mythtv-users] DVB Devices
>I had the same problem on FC3, i'm guessing you are running udev.
>
> I solved it by putting the following in my rules file
> (/etc/udev/rules.d/50-udev.rules)
>
> KERNEL="dvb" Name="dvb0"
>
> KERNEL="dvb0.dvr*", NAME="dvb/adapter0/dvr%n"
> KERNEL="dvb0.demux*", NAME="dvb/adapter0/demux%n"
> KERNEL="dvb0.frontend*", NAME="dvb/adapter0/frontend%n"
> KERNEL="dvb0.audio*", NAME="dvb/adapter0/audio%n"
> KERNEL="dvb0.ca*", NAME="dvb/adapter0/ca%n"
> KERNEL="dvb0.osd*", NAME="dvb/adapter0/osd%n"
> KERNEL="dvb0.net*", NAME="dvb/adapter0/net%n"
> KERNEL="dvb0.video*", NAME="dvb/adapter0/video%n"
>
> There's probably a cleaner solution, but it works for me (only one tuner
> card, I expect extra bits needed otherwise).
>
> David.
>
>
>
> A Thomson wrote:
>
>> I just moved my MythTV to a faster box.In doing so i used the new Gentoo
>> which has set up the DVB card as "/dev/dvb0.frontend" etc instead of
>> "/dev/dvb/adaptor0/frontend".
>> Mythtv-setup cannot find the card now.
>> I tried making the directory "/dev/dvb/adaptor0/" and dropping some
>> symlinks back to "/dev/dvb0.etc" but the card is still not found.
>> I get the feeling i need to use "MAKEDEV" but i'm unsure how i do that.
>> Thanks in advance.
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>mythtv-users mailing list
>>mythtv-users at mythtv.org
>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list