[mythtv-users] cx88_dvb: disagrees about version of symbol cx22702_attach

Ted Healey thealey at gmail.com
Fri May 20 18:05:39 UTC 2005


Thank you very much. I tried this, but it does not appear to fix my
problem. In my config, I now have

/lib/modules/2.6.11-1.14_FC3/v4l2/tveeprom.ko.old
/lib/modules/2.6.11-1.14_FC3/updates/drivers/media/video/tveeprom.ko

and the same for the other three files you mention. depmod -ae but
modprobe cx88-dvb still says cx88_dvb: disagrees about version of
symbol cx22702_attach in dmesg. rebooted, try again same deal. i guess
i could go the other way and remove the updates kernel modules and see
what happens with just the v4l ones in place?

I notice I am on ivtv-0.3.4a-85.rhfc3.at, maybe that is the problem?
Or, I could build from scratch, would be straightforward to do that,
just seems drastic given the problem, since everything else works
great.

Thanks again.

On 5/20/05, Rich Goodin <rich at goodin.com> wrote:
> 
> I don't know if this is the cleanest solution but here is what I did
> to get my PVR250 to work with dual pcHDTV 3000s. I'm building from
> source, ivtv-0.3.3k, pcHDTV-2.0 but this may not be required with
> later kernels. I'd also be interested if someone has a cleaner
> solution, particularly for udev on FC3.
> 
> After building and installing the drivers I rename the following
> duplicate files:
> cd /lib/modules/`uname -r`
> mv ivtv/msp3400.ko ivtv/msp3400.ko-
> mv ivtv/tveeprom.ko ivtv/tveeprom.ko-
> mv v4l2/cx88-atsc.ko v4l2/cx88-atsc.ko-
> mv v4l2/tuner.ko v4l2/tuner.ko-
> depmod -a
> 
> Then in my /etc/rc.d/rc.local:
> #
> # Setup vidio capture drivers
> #
> modprobe ivtv
> modprobe cx88-dvb
> 
> This gives me 3 v4l connections:
> 1) pcHDTV video in /dev/video0 (unused - it has weird color problems)
> 2) pcHDTV video in /dev/video1 (unused - "  "       "
> "         "               )
> 3) PVR250 video in /dev/video2 (DirectTV reciever Svideo connection)
> 
> And the dvb connections for the ATSC pcHDTV cards at:
> 1) /dev/dvb/adapter0
> 2) /dev/dvb/adapter1
> 
> It has been running reliably since I set it up a few months back.
> 
> Hope this helps,
> Rich Goodin
> 
> On May 20, 2005, at 10:17 AM, Ted Healey wrote:
> 
> > I have been stuck on this for a few wks. Overall my system works
> > fantastic with a 150, but I can't get my pcHDTV3000 to work.
> >
> > I think that it means that I have a conflict in one rpm vs another, in
> > the kernel modules. Or, that they are being modprobed in the wrong
> > order.  I installed the pchdtv driver (went just fine) and everything
> > else is FC3 Jarod / Axel.
> >
> > I am modprobing -r various modules, trying to get this to load
> > (randomly if I'm honest), but I am in over my head at this point. If
> > anyone could offer even a URL that offers troubleshooting information
> > wrt conflicts, load order, between kernel modules that would be
> > appreciated. I would like to fix it myself but man modprobe and google
> > are not getting it done.
> >
> > $ sudo modprobe cx88-dvb
> > FATAL: Error inserting cx88_dvb
> > (/lib/modules/2.6.11-1.14_FC3/updates/drivers/media/video/cx88-
> > dvb.ko):
> > Unknown symbol in module, or unknown parameter (see dmesg)
> > FATAL: Error running install command for cx88_dvb
> >
> > $ dmesg |tail
> > cx25840: decoder enable output
> > cx88_dvb: disagrees about version of symbol cx22702_attach
> > cx88_dvb: Unknown symbol cx22702_attach
> >
> > Thanks.
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> 
>


More information about the mythtv-users mailing list