[mythtv-users] Re: pcHDTV3000 - Anyone installed and use this?

Michael Haan michael.haan at gmail.com
Mon May 9 13:57:32 UTC 2005


On 5/9/05, Robert Tsai <rtsai1111 at comcast.net> wrote:
> If you feel like debugging, it looks like you don't have all the
> modules compiled and/or installed; cx88-dvb depends on some other
> module that provides tveeprom_xxx, etc.
> 
> More simply, the pchdtv.com website says the drivers are already
> included with 2.6.12
> 
> I'm using ubuntu 2.6.12-rc4 with HD-3000 DVB with no problem. The
> READMEs for the pcHDTV-2.0 drivers (included with 2.6.12-rc4) say what
> modules you will need.
> 
> On Sun, May 08, 2005 at 11:45:16PM -0400, Michael Haan wrote:
> > On 5/8/05, Michael Haan <michael.haan at gmail.com> wrote:
> > > 2.6.9-r14 on Gentoo.
> > >
> > > I've installed the card built the drivers and installed using:
> > >
> > > make && make install
> > >
> > > However, modprobe cx88-dvb I get:
> > > WARNING: Error inserting or51132
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/or51132.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting cx88xx
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx88xx.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting cx8802
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx8802.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting cx88xx
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx88xx.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > FATAL: Error inserting cx8800
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx8800.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting or51132
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/or51132.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting cx88xx
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx88xx.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > WARNING: Error inserting cx8802
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx8802.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > FATAL: Error inserting cx88_dvb
> > > (/lib/modules/2.6.9-gentoo-r14/v4l2/cx88-dvb.ko): Unknown symbol in
> > > module, or unknown parameter (see dmesg)
> > > FATAL: Error running install command for cx88_dvb
> > >
> > > And some of what dmesg reports is:
> > >
> > > or51132: Unknown symbol release_firmware
> > > or51132: Unknown symbol request_firmware
> > > cx88xx: Unknown symbol tveeprom_read
> > > cx88xx: Unknown symbol tveeprom_hauppauge_analog
> > > cx8802: Unknown symbol cx88_reset
> > > cx8802: Unknown symbol cx88_wakeup
> > >
> > > Can anyone help?
> > >
> >
> > Someone has to have done this.  Bueller?
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> --Rob
> 
> 
> 

I've tried on a few occasions to upgrade my kernel beyond 2.6.9. 
Unfortunately, doing so seems to break support for my onboard SATA
controllers.


More information about the mythtv-users mailing list