[mythtv-users] Via EPIA Xv Motion Compensation

[Örn Einar Hansen]

Þann Fimmtudagur 24 mars 2005 12:48 skrifaði Kristian Kalweit:
> via_v4l_drv is not necessary.
> Do you find drm and dri enabled in Xorg log?
>
  ok ... here are the Xorg entries:

(II) VIA(0): [drm] DRM interface version 1.2
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0xdc8ba000
(II) VIA(0): [drm] mapped SAREA 0xdc8ba000 to 0x421eb000
(II) VIA(0): [drm] framebuffer handle = 0xd8000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [drm] register handle = 0xe0000000
(II) VIA(0): [drm] mmio Registers = 0xe0000000
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xd0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xd0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [drm] FBFreeStart= 0x00400000 FBFreeEnd= 0x01fc0000 FBSize= 
0x01bc0000
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [drm] Irq handler installed, using IRQ 11.
.
.
.
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): [dri] use agp.
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): [dri] kernel data initialized.

But, when I try to play a movie with "via xvmc" enabled MPlayer, I get the 
following message that indicates that the driver isn't working as it should:

==========================================================================
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
vo_xvmc: X-Video extension 2.2
vo_xvmc: X-Video MotionCompensation Extension version 1.0
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 720 x 576 (preferred csp: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.

> Kristian.