[mythtv-users] Re: USB MCE IR Receiver

Jim Oltman cnliberal at gmail.com
Tue Mar 15 19:38:40 UTC 2005


Yeah Axel, I noted in a later email that i should have scrolled
further down the page.  Nothing like a noob mistake to end a Monday. 
I am not really familiar with CVS or compiling which is why I was
asking those questions about which version.  My bad.  I think i will
be able to compile the current version with the MCE receiver fix (I
hope).  If not, then I get to format my frontend....again!  Again,
sorry for the mixup.

Jim


On Tue, 15 Mar 2005 20:00:09 +0100, Axel Thimm <Axel.Thimm at atrpms.net> wrote:
> On Mon, Mar 14, 2005 at 05:45:15PM -0600, Jim Oltman wrote:
> > I just looked on ATRPMs website and there is no listing for getting
> > the source code for the lirc drivers.
> 
> Don't be impatient and just scroll to the bottom of the page ...
> 
> > There is also no mention of exactly what "CVS version" I am using
> > (0.7.0pre 4 or 5 or 6 or 7 or 8).  I know that I have lirc 0.7.0-45
> > from ATRPMs but other than that, I have no idea.
> 
> So, if there is no pre/cvs mark in the version/release, wouldn't it
> make sense to assume it is a release cut and no cvs/pre?
> 
> > Anyone know what version I could be running?  I would LOVE to get
> > this remote going so I could move on to bugging the list about other
> > problems!  :-) Thanks!
> 
> I'd suggest checking with the lirc list for either a patch backported
> to 0.7.0 or a release for 0.7.1.
> 
> > On Mon, 14 Mar 2005 14:44:10 -0800 (PST), Joe Huffner <huffner at yahoo.com> wrote:
> > >
> > > Unless ATRPMS have been updated, then the only way to
> > > get this to work would be to compile the drivers. My
> > > guess is that these drivers will be updated in the
> > > not-too-distant-future, but exactly when that happens
> > > is up to the lirc maintainers. Then the RPMS will have
> > > to be udpated as well.
> > >
> > > Something you can try is to leave your current lirc
> > > installed.
> > >
> > > 1. Download the same version you have installed.
> > > 2. Copy the the previously attached source code to the
> > > appropriate place.
> > > 3. Configure and compile source.
> > > 4. Copy the new lirc_mceusb and lirc_dev modules over
> > > the existing files. (After making a backup of the
> > > originals of course.)
> > > 5. Unload the modules, then load the new modules. (Or
> > > reboot for the easiest way.)
> > >
> > > About your questions concerning my modprobe.conf and
> > > what not. I don't have anything currently in their
> > > except ethernet and video. Since my remote wasn't
> > > working with lirc yet, there was no reason to put
> > > anything in there. Also, I am running gentoo, so I
> > > don't know the exact format of the modprobe.conf file,
> > > but my guess is you would just want the module name
> > > you would want to load. In this case it would just be
> > > lirc_mceusb, all the other modules required by lirc
> > > should be loaded.
> > >
> > >
> > > > Since I used apt-get to install lirc and
> > > > mythtv-suite, I take it that
> > > > is would be EXTREMELY difficult for me to compile
> > > > this new driver into
> > > > lirc especially since I have never compiled anything
> > > > in my entire life
> > > > (except for those 2 semesters in college compiling C
> > > > code that barely
> > > > worked).  As I understand it, mythtv-suite already
> > > > has the lirc-lib
> > > > included.  Is there a way around all this?  Does
> > > > anyone know?  My
> > > > version of the mce_usb driver is listed as v0.2 but
> > > > doesn't mention
> > > > anything about this Dan Conti.  Also, on ATRPMs it
> > > > looks like Axel
> > > > last updated the lirc drivers on Mar 5th 12:27 CET.
> > > > Could you tell me
> > > > how you were able to get your MCE IR receiver up and
> > > > working (assuming
> > > > I have the right driver).  What did you put in your
> > > > /etc/modprobe.conf?  I didn't have a /dev/lirc0 only
> > > > a /dev/lircd so
> > > > in my rc.local I put these statements in:
> > > >
> > > > ln -s /dev/lircd /dev/lirc0
> > > > chmod 666 /dev/lirc0
> > > >
> > > > /sbin/modprobe lirc_mceusb
> > > > /usr/sbin/lircd --device=/dev/lirc0
> > > >
> > > > Am I incorrect?  Should I be doing something
> > > > different?  Thanks!
> > > >
> > > >
> > > > On Sun, 13 Mar 2005 23:04:11 -0600, Jim Oltman
> > > > <cnliberal at gmail.com> wrote:
> > > > > Since I used apt-get to install lirc and
> > > > mythtv-suite, I take it that
> > > > > is would be EXTREMELY difficult for me to compile
> > > > this new driver into
> > > > > lirc especially since I have never compiled
> > > > anything in my entire life
> > > > > (except for those 2 semesters in college compiling
> > > > C code that barely
> > > > > worked).  As I understand it, mythtv-suite already
> > > > has the lirc-lib
> > > > > included.  Is there a way around all this?  Does
> > > > anyone know?  My
> > > > > version of the mce_usb driver is listed as v0.2
> > > > but doesn't mention
> > > > > anything about this Dan Conti.  Also, on ATRPMs it
> > > > looks like Axel
> > > > > last updated the lirc drivers on Mar 5th 12:27
> > > > CET.  Could you tell me
> > > > > how you were able to get your MCE IR receiver up
> > > > and working (assuming
> > > > > I have the right driver).  What did you put in
> > > > your
> > > > > /etc/modprobe.conf?  I didn't have a /dev/lirc0
> > > > only a /dev/lircd so
> > > > > in my rc.local I put these statements in:
> > > > >
> > > > > ln -s /dev/lircd /dev/lirc0
> > > > > chmod 666 /dev/lirc0
> > > > >
> > > > > /sbin/modprobe lirc_mceusb
> > > > > /usr/sbin/lircd --device=/dev/lirc0
> > > > >
> > > > > Am I incorrect?  Should I be doing something
> > > > different?  Thanks!
> > > > >
> > > > > On Sun, 13 Mar 2005 20:20:20 -0800 (PST), Joe
> > > > Huffner <huffner at yahoo.com> wrote:
> > > > > > Just an FYI for those of us who bought one of
> > > > the
> > > > > > updated MCE remotes and receivers. I was
> > > > checking out
> > > > > > the lirc mailing list and someone has update the
> > > > > > driver to include support. From what I can tell
> > > > the
> > > > > > update has not been updated in CVS.
> > > > > >
> > > > > > I found the info at:
> > > > > >
> > > >
> > > http://search.gmane.org/?query=mce&group=gmane.comp.hardware.lirc
> > > > > >
> > > > > > Basically what I did was overwrite the
> > > > lirc_mceusb.c
> > > > > > in the drivers/lirc_mceusb directory with the
> > > > source
> > > > > > found in the mailing liste. (I have attached the
> > > > new
> > > > > > source file.) Then went through the install
> > > > process
> > > > > > documented. I used version .7.0 of lirc.
> > > > > >
> > > > > > Please note, from what I have read and
> > > > experienced,
> > > > > > there are some initialization problems. What
> > > > seemed to
> > > > > > "fix it" was unplugging the receiver and
> > > > plugging it
> > > > > > back in, until I no longer got an error message
> > > > > > stating the device did not initialize. You can
> > > > check
> > > > > > this by running "tail -f /var/log/messages".
> > > > Also, I
> > > > > > read that running kernel 2.6.11 seemed to fix
> > > > the
> > > > > > initialization problem. However I cannot confirm
> > > > this
> > > > > > as I am running Gentoo Dev Kernel 2.6.9-r9.
> > > > Another
> > > > > > problem I am having is that I am getting
> > > > non-stop
> > > > > > error messages stating:
> > > > > >
> > > > > > "usb 2-2: bulk timeout on ep1in"
> > > > > >
> > > > > > In fact, I was getting about 4 of those messages
> > > > per
> > > > > > second. If/when I get time I am planning to
> > > > upgrade to
> > > > > > 2.6.11 to see if this fixes the issue.
> > > > > >
> > > > > > -joe
> > > > >
> > > > > _______________________________________________
> > > > mythtv-users mailing list
> > > > mythtv-users at mythtv.org
> > > >
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam?  Yahoo! Mail has the best spam protection around
> > > http://mail.yahoo.com
> > >
> > >
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> > >
> > >
> 
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> --
> Axel.Thimm at ATrpms.net
> 
> 
>


More information about the mythtv-users mailing list