[mythtv-users] Re: USB MCE IR Receiver
Joe Huffner
huffner at yahoo.com
Tue Mar 15 05:19:40 UTC 2005
The problem is the original source doesn't work with
the newer MCE remotes. If you look for one of my
previous posts, then you will see a newer
lirc_mceusb.c attached that you will need to overwrite
the existing file.
Since I don't use Fedora Core, I can't tell you the
best way to get it running. The easiest way would be
to download version 0.7.0 of lirc from www.lirc.org,
overwrite the lirc_mceusb.c file with the newer one,
compile the new version, copy the new lirc_dev.ko and
lirc_mceusb.ko over the existing lirc modules (Make
sure to make a backup copy of the original module
files). They should be located in /lib/modules/*your
kernel version*/misc/
After that you can either unload the lirc_mseusb and
lirc_dev modules and reload them, or you can reboot
your system let the modules be loaded at startup.
(Assuming you have the appropriate entries in modules
autoloading config file.)
--- Darren Richards <darren.richards at gmail.com> wrote:
> I guess I don't understand... What's the point in
> recompiling from
> source if you're grabbing the same version that
> mythtv-suite
> installed? I thought the whole point was to install
> a new version
> whcih (hopefully) has support for my new fancy
> remote and IR receiver.
>
> By the way, have you noticed the range and
> directionality on that
> thing? From anywhere in the room, I can literally
> point the remote in
> any direction and have the light on the receiver
> light up. Once we
> get it to work, this thing will work *really* well.
>
> -darren
>
> On Mon, 14 Mar 2005 21:56:06 -0600, Jim Oltman
> <cnliberal at gmail.com> wrote:
> > As I unserstand it, if you do that, you will
> damage the mythtv-suite
> > install. I tried something similar when i was
> trying to install an
> > older version of LIRC. It damaged the
> mythtv-suite install. I had to
> > format my drive and start over. I think I might
> be able to get the
> > lirc source from Axel's site. If I would have
> read far enough down
> > the page, I would have seen the src rpm there. I
> think I can use the
> > same rpm -i to get the source for that. But it is
> only a hunch. Am I
> > close guys?
> >
> > On Mon, 14 Mar 2005 20:47:19 -0700, Darren
> Richards
> > <darren.richards at gmail.com> wrote:
> > > Jim,
> > >
> > > Isn't there a way to uninstall the version of
> LIRC installed with
> > > mythtv? I'm not asking rhetorically, but
> because I really don't know.
> > > Couldn't you just do an apt-get remove LIRC?
> > >
> > > -darren
> > >
> > >
> > > On Mon, 14 Mar 2005 21:13:10 -0600, Jim Oltman
> <cnliberal at gmail.com> wrote:
> > > > If you are using ATRPMs to install mythtv,
> then lirc-lib is already
> > > > installed. Since that is a certain version of
> LIRC that is used in
> > > > that setup, if you get the wrong version of
> LIRC to compile, it won't
> > > > work. That is why we need to know what
> version is on ATRPMs. I will
> > > > email that list and try and find out.....I
> just did, let's see who
> > > > responds. Thanks!
> > > >
> > > > On Mon, 14 Mar 2005 19:57:11 -0700, Darren
> Richards
> > > > <darren.richards at gmail.com> wrote:
> > > > > Andy,
> > > > >
> > > > > If there's an update in the source code that
> may make my new IR
> > > > > receiver work, I'll definitely try my hand
> at compiling LIRC. Your IR
> > > > > blaster walkthrough already saved the day
> for me once before, so I
> > > > > have high confidence... I'll let you know
> how it goes.
> > > > >
> > > > > Thanks,
> > > > > darren
> > > > >
> > > > > On Mon, 14 Mar 2005 20:28:00 -0600, Andy
> Long <andymyth at gmail.com> wrote:
> > > > > > If you'd like to give compiling LIRC
> another chance, Pete and I have
> > > > > > written a guide for doing it on FC3. It's
> directed at enabling more
> > > > > > devices than 2 with LIRC (now not needed
> for ATRPMS due to a change a
> > > > > > few days ago), but should be pretty
> straightforward. May be worth a
> > > > > > shot if you'd like to try.
> > > > > >
> > > > > >
> http://lircsetup.com/lirc/trouble/kernsource.php
> > > > > >
> > > > > > -Andy
> > > > > >
> > > > > >
> > > > > > On Mon, 14 Mar 2005 19:01:33 -0700, Darren
> Richards
> > > > > > <darren.richards at gmail.com> wrote:
> > > > > > > My USB MCE remote just came in the mail
> today. I figured if there's a
> > > > > > > link to it from Jarod's guide, I should
> be able to get it working.
> > > > > > > Imagine my dismay when I started
> searching the archives and came
> > > > > > > across this thread. Jim, I'm in exactly
> the same boat as you. Even
> > > > > > > if there was a magical fix in CVS, I've
> never successfully compiled
> > > > > > > anything in my life. I'm completely
> dependent upon apt-get and
> > > > > > > ATRPMS.
> > > > > > >
> > > > > > > Please, please keep us posted if you
> come up with anything. I'll
> > > > > > > start digging into this probably
> tomorrow, and maybe I'll have some
> > > > > > > luck...
> > > > > > >
> > > > > > > -darren
> > > > > > >
> > > > > > >
> > > > > > > On Mon, 14 Mar 2005 17:45:15 -0600, Jim
> Oltman <cnliberal at gmail.com> wrote:
> > > > > > > > I just looked on ATRPMs website and
> there is no listing for getting
> > > > > > > > the source code for the lirc drivers.
> There is also no mention of
> > > > > > > > exactly what "CVS version" I am using
> (0.7.0pre 4 or 5 or 6 or 7 or
> > > > > > > > 8). I know that I have lirc 0.7.0-45
> from ATRPMs but other than that,
> > > > > > > > I have no idea. Anyone know what
> version I could be running? I would
> > > > > > > > LOVE to get this remote going so I
> could move on to bugging the list
> > > > > > > > about other problems! :-) Thanks!
> > > > > > > >
> > > > > > > >
> > > > > > > > On Mon, 14 Mar 2005 14:44:10 -0800
> (PST), Joe Huffner <huffner at yahoo.com> wrote:
> > > > > > > > >
> > > > > > > > > Unless ATRPMS have been updated,
> then the only way to
> > > > > > > > > get this to work would be to compile
> the drivers. My
> > > > > > > > > guess is that these drivers will be
> updated in the
> > > > > > > > > not-too-distant-future, but exactly
> when that happens
> > > > > > > > > is up to the lirc maintainers. Then
> the RPMS will have
> > > > > > > > > to be udpated as well.
> > > > > > > > >
> > > > > > > > > Something you can try is to leave
> your current lirc
> > > > > > > > > installed.
> > > > > > > > >
> > > > > > > > > 1. Download the same version you
> have installed.
> > > > > > > > > 2. Copy the the previously attached
> source code to the
> > > > > > > > > appropriate place.
> > > > > > > > > 3. Configure and compile source.
> > > > > > > > > 4. Copy the new lirc_mceusb and
> lirc_dev modules over
> > > > > > > > > the existing files. (After making a
> backup of the
> > > > > > > > > originals of course.)
> > > > > > > > > 5. Unload the modules, then load the
> new modules. (Or
> > > > > > > > > reboot for the easiest way.)
> > > > > > > > >
> > > > > > > > > About your questions concerning my
> modprobe.conf and
> > > > > > > > > what not. I don't have anything
> currently in their
> > > > > > > > > except ethernet and video. Since my
> remote wasn't
> > > > > > > > > working with lirc yet, there was no
> reason to put
> > > > > > > > > anything in there. Also, I am
> running gentoo, so I
> > > > > > > > > don't know the exact format of the
> modprobe.conf file,
> > > > > > > > > but my guess is you would just want
> the module name
> > > > > > > > > you would want to load. In this case
> it would just be
> > > > > > > > > lirc_mceusb, all the other modules
> required by lirc
> > > > > > > > > should be loaded.
> > > > > > > > >
> > > > > > > > > --- Jim Oltman <cnliberal at gmail.com>
> wrote:
> > > > > > > > >
> > > > > > > > > > Since I used apt-get to install
> lirc
=== message truncated ===>
_______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
>
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
More information about the mythtv-users
mailing list