[mythtv-users] TVOUT mode settings geforce2 mx400 PAL

Hamish Moffatt hamish at cloud.net.au
Sat Mar 5 13:10:23 UTC 2005


On Tue, Mar 01, 2005 at 04:42:15PM +1100, Phill Edwards wrote:
>         Identifier   "Monitor0"
>         VendorName   "Philips"
>         ModelName    "80cm TV"
>         HorizSync    30.0 - 50.0
> #       VertRefresh  60.0 - 60.0
>         VertRefresh  50.0 - 60.0
> #       ModeLine "640x480PAL"   29.50 640  675  678  944  480  530  535  625
> #       ModeLine "720x576PAL"   27.50 720  744  800  880  576  581  583  625
> #       ModeLine "800x600PAL"   36.00 800  818  820  960  600  653  655  750
>         # Generated from http://sh.nu/nvidia/gtf.php. Note that if use 50 Hz
>         # as refresh rate the hsync comes out at 29.65 which is below what's
>         # specified above.
>         # 720x576 @ 51.00 Hz (GTF) hsync: 30.29 kHz; pclk: 27.14 MHz
>         Modeline "720x576_51.00"  27.14  720 736 808 896  576 577 580
> 594  -HSync +Vsync

Is your 80cm TV widescreen?

I recently realised that I am running 720x576 on my 68cm 4:3 TV. This is
a bit daft as 720x576 is the broadcast widescreen resolution. I should
really be running 768x576 (4:3) or even 800x600.

Still, 720x576 works pretty well with Myth anyway, though some of the
edges are being clipped in 16:9 Zoom mode.


Hamish
-- 
Hamish Moffatt VK3SB <hamish at debian.org> <hamish at cloud.net.au>


More information about the mythtv-users mailing list