[mythtv-users] PVR 350 and MythVideo

Fri Jun 17 21:28:43 UTC 2005

On 6/17/05, Chris Baumgartner <mchrisb03 at sbcglobal.net> wrote:
> The old module is still hanging around someplace like:
> 
> /lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video
> 
> If it's not there do a:
> 
> locate ivtv.ko
> 
> --Chris
> 
> > -----Original Message-----
> > From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> > bounces at mythtv.org] On Behalf Of Ant Daniel
> > Sent: Friday, June 17, 2005 3:55 PM
> > To: Discussion about mythtv
> > Subject: Re: [mythtv-users] PVR 350 and MythVideo
> >
> > On 6/17/05, Duncan Brown <mythtv at duncb.co.uk> wrote:
> > > John Harvey wrote:
> > >
> > > >Try using the latest ivtv. There were some fixes in
> > > >the yuv stuff after 3.6k
> > > >John
> > > >
> > > Well that improved stuff slightly. No green and purple, and the image is
> > > steady. However its very pixellated and only shows on the top half of
> > > the screen. I also just noticed the fullscreen and zoom commands for
> > > mplayer make zero difference to the image if turned on or off.
> > >
> > > The tuning problem I've just fixed, it was an alias problem from the
> > > previous ivtv version
> > >
> > >
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> >  I've been following the details in this thread, but I have a problem
> > that's driving me nuts.
> >
> > I had originally installed on FC3 following Jarod's excellent guide.
> > I decided I'd like to try out the xv stuff so downloaded, built and
> > installed the latest driver (0.3.6n) during install it complained
> > about the ivtv modules from atrpms, so I moved them out of the way.
> > Made & installed utils and copied new ivtvdev_drv.o in X11. Ran
> > depmod.
> >
> > However when I reboot my /var/log/messages keeps telling me that I'm
> > running 0.2.0 (rc3j) which was the old version.
> >
> > I've checked and double checked and can't find the reason, running
> > find only shows three locates for the .ko files
> > /lib/modules/2.6.11-1.27_FC3/ivtv, my backup of the originals (in my
> > home directory) and the build of the new files (also in my home
> > directory).
> >
> > All help much appreciated.
> > Ant.
> >
> > Modinfo tells me it loaded the correct module.
> >
> > filename:       /lib/modules/2.6.11-1.27_FC3/ivtv/ivtv.ko
> > ...
> > <snip>
> > ...
> > description:    iTVC15_16 driver
> > license:        GPL
> > version:        0.3.6-n
> > vermagic:       2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4
> > depends:        videodev,i2c-algo-bit
> > srcversion:     C23E4B42A83C099403B8C53
> >
> >
> >
> > My log output is as follows:
> > Jun 17 21:42:40 olympus kernel: ivtv: ==================== START INIT
> > IVTV ====================
> > Jun 17 21:42:40 olympus kernel: ivtv: version 0.2.0 (rc3j) loading
> > Jun 17 21:42:40 olympus sshd:  succeeded
> > Jun 17 21:42:40 olympus kernel: ivtv: Linux version: 2.6.11-1.27_FC3
> > 686 REGPARM 4KSTACKS gcc-3.4
> > Jun 17 21:42:40 olympus kernel: ivtv: In case of problems please
> > include the debug info
> > Jun 17 21:42:40 olympus kernel: ivtv: between the START INIT IVTV and
> > END INIT IVTV lines when
> > Jun 17 21:42:41 olympus kernel: ivtv: mailing the ivtv-devel mailinglist.
> > Jun 17 21:42:41 olympus xinetd: xinetd startup succeeded
> > Jun 17 21:42:41 olympus kernel: ivtv: Autodetected WinTV PVR 350 card
> > Jun 17 21:42:41 olympus kernel: ivtv: Found an iTVC15 based chip
> > Jun 17 21:42:41 olympus kernel: ACPI: PCI Interrupt Link [LNK3]
> > enabled at IRQ 12
> > Jun 17 21:42:41 olympus kernel: PCI: setting IRQ 12 as level-triggered
> > Jun 17 21:42:41 olympus nfs: Starting NFS services:  succeeded
> > Jun 17 21:42:41 olympus kernel: ACPI: PCI interrupt 0000:01:06.0[A] ->
> > GSI 12 (level, low) -> IRQ 12
> > Jun 17 21:42:41 olympus kernel: ivtv: Unreasonably low latency timer,
> > setting to 64 (was 32)
> > Jun 17 21:42:41 olympus kernel: ivtv: XXX PCI device: 0x01e0 vendor:
> > 0x10de
> > Jun 17 21:42:41 olympus nfs: rpc.rquotad startup succeeded
> > Jun 17 21:42:41 olympus kernel: tveeprom: Hauppauge: model = 48135,
> > rev = J324, serial# = 6814576
> > Jun 17 21:42:42 olympus kernel: tveeprom: tuner = Philips FM1246 (idx
> > = 24, type = 1)
> > Jun 17 21:42:42 olympus kernel: tveeprom: tuner fmt = PAL(I) (eeprom =
> > 0x10, v4l2 = 0x00000010)
> > Jun 17 21:42:42 olympus kernel: tveeprom: audio_processor = CS5331 (type =
> > 9)
> > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=tveeprom[0],ok]
> > Jun 17 21:42:42 olympus nfs: rpc.nfsd startup succeeded
> > Jun 17 21:42:42 olympus kernel: msp34xx: ivtv version
> > Jun 17 21:42:42 olympus kernel: msp34xx: init: chip=MSP3418W-A2, has
> > NICAM support, simple (D) mode, simpler (G) no-thread mode
> > Jun 17 21:42:42 olympus nfs: rpc.mountd startup succeeded
> > Jun 17 21:42:42 olympus kernel: msp34xx: $Id$ compiled on: May 19 2005
> > 04:40:44
> > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=MSP3418W-A2,ok]
> > Jun 17 21:42:42 olympus rpcidmapd: rpc.idmapd -SIGHUP succeeded
> > Jun 17 21:42:42 olympus kernel: saa7115: starting probe for adapter
> > ivtv i2c driver #0 (0x10005)
> > Jun 17 21:42:42 olympus kernel: saa7115: detecting saa7115 client on
> > address 0x42
> > Jun 17 21:42:42 olympus kernel: saa7115: writing init values
> > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=saa7115[0],ok]
> > Jun 17 21:42:42 olympus kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
> > Jun 17 21:42:42 olympus kernel: tuner: chip found at addr 0xc2 i2c-bus
> > ivtv i2c driver #0
> > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=(tuner unset),ok]
> > Jun 17 21:42:42 olympus kernel: saa7127: detecting saa7127 client on
> > address 0x88
> > Jun 17 21:42:42 olympus kernel: saa7127: Selecting NTSC video Standard
> > Jun 17 21:42:42 olympus kernel: saa7127: Selecting S-Video+Composite
> > Jun 17 21:42:42 olympus kernel: saa7127: Turn WSS off
> > Jun 17 21:42:42 olympus kernel: saa7127: Widescreen Mode 4:3 Full Format
> > Jun 17 21:42:42 olympus kernel: saa7127: Selecting Normal Encoder Input
> > Jun 17 21:42:42 olympus kernel: saa7127: Enable Video Output
> > Jun 17 21:42:42 olympus kernel: ivtv: i2c attach [client=saa7127[0],ok]
> > Jun 17 21:42:42 olympus kernel: ivtv: Tuner Type 1, Tuner formats
> > 0x00000010, Radio: yes, Model 0x00a93494, Revision 0x00000001
> > Jun 17 21:42:42 olympus kernel: ivtv: Radio detected
> > Jun 17 21:42:42 olympus kernel: ivtv: Encoder revision: 0x02040024
> > Jun 17 21:42:42 olympus xinetd[3509]: xinetd Version 2.3.13 started
> > with libwrap loadavg options compiled in.
> > Jun 17 21:42:42 olympus kernel: ivtv: Encoder Firmware may be buggy,
> > use version 0x02040011
> > Jun 17 21:42:42 olympus xinetd[3509]: Started working: 0 available
> > services
> > Jun 17 21:42:42 olympus kernel: ivtv: Decoder revision: 0x02020023
> > Jun 17 21:42:42 olympus kernel: ivtv: Configuring WinTV PVR 350 card
> > with 9 streams
> > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 0 using 256
> > 16384 byte buffers  4194304 kbytes total
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 0 minor 0
> > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 1
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 1 minor 32
> > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 2 using 40 52224
> > byte buffers  2097152 kbytes total
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 2 minor 224
> > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 3 using 455
> > 4608 byte buffers  2097152 kbytes total
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 3 minor 24
> > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 4
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 4 minor 64
> > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 5 using 16
> > 65536 byte buffers  1048576 kbytes total
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 5 minor 16
> > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 6 using 1024 2048
> > byte buffers  262144 kbytes total
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 6 minor 228
> > Jun 17 21:42:42 olympus kernel: ivtv: Create stream 7
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 7 minor 232
> > Jun 17 21:42:42 olympus kernel: ivtv: Create DMA stream 8
> > Jun 17 21:42:42 olympus kernel: ivtv: Registered v4l2 device,
> > streamtype 8 minor 48
> > Jun 17 21:42:42 olympus kernel: ivtv: Setting Tuner 1
> > Jun 17 21:42:42 olympus kernel: tuner: type set to 1 (Philips PAL_I
> > (FI1246 and compatibles)) by ivtv i2c driver #0
> > Jun 17 21:42:42 olympus kernel: saa7115: decoder set input (4)
> > Jun 17 21:42:42 olympus kernel: saa7115: now setting Composite input
> > Jun 17 21:42:42 olympus kernel: ivtv: Setting audio matrix to input 3,
> > output 1
> > Jun 17 21:42:42 olympus kernel: ivtv: Switching standard to PAL.
> > Jun 17 21:42:42 olympus kernel: ivtv: ivtv_enc_thread: pid = 551, itv
> > = 0xde9650a0
> > Jun 17 21:42:42 olympus kernel: ivtv: ivtv_dec_thread: pid = 552, itv
> > = 0xde9650a0
> > Jun 17 21:42:42 olympus kernel: ivtv: i2c client addr: 0x43 not found!
> > Jun 17 21:42:42 olympus kernel: saa7115: decoder set norm PAL
> > Jun 17 21:42:42 olympus kernel: saa7115: set audio: 0x01
> > Jun 17 21:42:42 olympus kernel: saa7127: Setting Encoder Video Standard
> > Jun 17 21:42:43 olympus kernel: saa7127: Set PAL Video Mode
> > Jun 17 21:42:43 olympus kernel: saa7127: Selecting PAL video Standard
> > Jun 17 21:42:43 olympus kernel: ivtv: Initialized WinTV PVR 350, card #0
> > Jun 17 21:42:43 olympus kernel: ivtv: ====================  END INIT
> > IVTV  ====================
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
> 

ls /lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video
ls: /lib/modules/2.6.11-1.27_FC3/updates/drivers/media/video: No such
file or directory

that was where the old modules where, but no longer there, locate
(after running an updatedb) shows:

locate ivtv.ko
/lib/modules/2.6.11-1.27_FC3/ivtv/ivtv.ko
/home/mythtv/ivtv-0.3.6n/driver/ivtv.ko
/home/mythtv/ivtv-0.3.6n/driver/.ivtv.ko.cmd
/home/mythtv/olddrivers/ivtv.ko
/home/mythtv/olddrivers/tveeprom-ivtv.ko
/home/mythtv/olddrivers/msp3400-ivtv.ko
/home/mythtv/olddrivers/tuner-ivtv.ko

Still no luck :(

Ant.