[mythtv-users] multiple tuners - configuring capture cards

Tue Jul 12 21:03:53 EDT 2005

What does the line

"saa7127: Ignoring new-style parameters in presence of obsolete ones"

indicate? I assume it means there's some parameter I think I'm
setting which is being ignored but I don't know "new-style" from
obsolete so where do I find the parameter syntax and where should I
start looking for the old format ones?

I'm also suspicious of

"ivtv: i2c client addr: 0x44 not found for command 0x40046502!"

on the final line for the PVR-350

Jim

>Latest update:
>
>So, I started undoing some of the changes I had made (one at a time)
>and I got the first one undone with some success. I had replaced
>/etc/init.d/set_ivtv_params with a simpler script that I had seen
>elsewhere and when I put back the original (always save what you
>change out) I now have both the 150 and 350 tuners working in live tv
>and changing channels! i have two tuners actually able to record
>independently! Amazing 8^)
>
>So, the next piece of work is to get the LIRC working again.
>
>Anyone see anything in here?
>
>ivtv: ==================== START INIT IVTV ====================
>ivtv: version 0.3.6 (y) loading
>ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
>ivtv: In case of problems please include the debug info
>ivtv: between the START INIT IVTV and END INIT IVTV lines when
>ivtv: mailing the ivtv-devel mailinglist.
>ivtv: Autodetected WinTV PVR 150 card
>ivtv: Found an iTVC16 based chip
>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
>ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
>ivtv: Unreasonably low latency timer, setting to 64 (was 32)
>ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
>tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8002732
>tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>tveeprom: audio_processor = TDA9850 (type = 3)
>ivtv: i2c attach [client=tveeprom[50],ok]
>ivtv: i2c attach [client=(tuner unset),ok]
>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model
>0x008d1659, Revision 0x00000000
>ivtv: NTSC tuner detected
>ivtv: Radio detected
>cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
>cx25840: detecting cx25840 client on address 0x88
>cx25840: cx25841-23 found. Initializing...
>cx25840: requesting /lib/modules/HcwMakoA.ROM
>cx25840: firmware loaded
>ivtv: i2c attach [client=cx25840[50],ok]
>ivtv: i2c attach [client=wm8775[50],ok]
>ivtv: Encoder revision: 0x02040011
>ivtv: Configuring WinTV PVR 150 card with 5 streams
>ivtv: Registered v4l2 device for encoder MPEG minor 0
>ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder YUV minor 32
>ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder VBI minor 224
>ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder PCM audio minor 24
>ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder radio minor 64
>ivtv: Create encoder radio stream
>ivtv: Setting Tuner 50
>tuner 2-0061: type set to 50 (TCL 2002N)
>cx25840: decoder set norm NTSC
>cx25840: decoder set input (6)
>cx25840: now setting Tuner input
>cx25840: set audio input (0)
>ivtv: ivtv_enc_thread: pid = 2190, itv = 0xf9215620
>ivtv: ivtv_enc_vbi_thread: pid = 2191, itv = 0xf9215620
>ivtv: Switching standard to NTSC.
>cx25840: decoder set norm NTSC
>ivtv: Initialized WinTV PVR 150, card #0
>ivtv: Autodetected WinTV PVR 350 card
>ivtv: Found an iTVC15 based chip
>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
>ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
>ivtv: Unreasonably low latency timer, setting to 64 (was 32)
>ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
>tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 2947528
>tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>tveeprom: audio_processor = MSP3440 (type = 11)
>ivtv: i2c attach [client=tveeprom[50],ok]
>ivtv: i2c attach [client=(tuner unset),ok]
>tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
>msp34xx: ivtv version
>msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode,
>simpler (G) no-thread mode
>msp34xx: $Id$ compiled on: Jul 10 2005 12:26:39
>ivtv: i2c attach [client=MSP3448W-A2,ok]
>saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
>saa7115: detecting saa7115 client on address 0x42
>saa7115: writing init values
>ivtv: i2c attach [client=saa7115[50],ok]
>saa7115: status: (1E) 0x01, (1F) 0xc0
>cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
>cx25840: detecting cx25840 client on address 0x88
>cx25840: client id: cx25840_i2c_id 1, skipped
>ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
>0x00ad1598, Revision 0x00000001
>ivtv: Radio detected
>saa7127: Ignoring new-style parameters in presence of obsolete ones
>saa7127: video encoder driver version V 0.3 loaded
>saa7127: detecting saa7127 client on address 0x88
>saa7127: saa7127 client id: saa7127_i2c_id 0, skipped
>ivtv: Encoder revision: 0x02040011
>ivtv: Decoder revision: 0x02020023
>ivtv: Configuring WinTV PVR 350 card with 10 streams
>ivtv: Registered v4l2 device for encoder MPEG minor 1
>ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder YUV minor 33
>ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder VBI minor 225
>ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder PCM audio minor 25
>ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
>ivtv: Registered v4l2 device for encoder radio minor 65
>ivtv: Create encoder radio stream
>ivtv: Registered v4l2 device for decoder MPEG minor 17
>ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
>ivtv: Registered v4l2 device for decoder VBI minor 229
>ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
>ivtv: Registered v4l2 device for decoder VOUT minor 233
>ivtv: Create decoder VOUT stream
>ivtv: Registered v4l2 device for decoder YUV minor 49
>ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
>ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
>ivtv: Setting Tuner 47
>tuner 3-0061: type set to 47 (LG NTSC (TAPE series))
>saa7115: decoder set norm NTSC
>saa7115: set audio: 0x01
>saa7115: decoder set input (4)
>saa7115: now setting Composite input
>ivtv: Setting audio matrix to input 3, output 1
>ivtv: Switching standard to NTSC.
>ivtv: ivtv_enc_thread: pid = 2288, itv = 0xf9238a1c
>ivtv: ivtv_enc_vbi_thread: pid = 2289, itv = 0xf9238a1c
>ivtv: ivtv_dec_thread: pid = 2290, itv = 0xf9238a1c
>ivtv: ivtv_dec_vbi_thread: pid = 2291, itv = 0xf9238a1c
>saa7115: decoder set norm NTSC
>saa7115: set audio: 0x01
>ivtv: i2c client addr: 0x44 not found for command 0x40046502!
>ivtv: Initialized WinTV PVR 350, card #1
>ivtv: ====================  END INIT IVTV  ====================
>
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users