[mythtv-users] APT-GET Broke IVTV and Myth

[Jack Trout]

Okay, not sure where is right, but I am gonna post here and if no one
answers post everywhere else. Just updated my Fedora Core 2
installation with apt-get update && apt-get dist-upgrade, which
installed a new kernal and when switching to that kernal I had to also
install a new nvidia kernal module, I think whats missing is that I
dont have the new IVTV kernal module and not sure how to get it, but I
get errors in dmesg
right after the update and a restart My box couldnt change channel and
kept changing guide info but same channel was listed, error read as
unknown tuner type, noticed when it was working that it was
discovering my tuners as type 2 so I set it to type 2 in my
modprobe.conf and could again change channels but still get errors
about unknown tuner type

hopefully this will be an easy fix, anyone else know what I did wrong?


IVTV Debug info
Jan 19 22:15:30 localhost kernel: ivtv: ==================== START
INIT IVTV ====================
Jan 19 22:15:30 localhost kernel: ivtv: version 0.1.10
(0.1.10-49_pre2_ck100zz.rhfc2.at) loading
Jan 19 22:15:30 localhost kernel: ivtv: Linux version: 2.6.10-1.8_FC2
686 REGPARM 4KSTACKS gcc-3.3
Jan 19 22:15:30 localhost kernel: ivtv: In case of problems please
include the debug info
Jan 19 22:15:30 localhost kernel: ivtv: between the START INIT IVTV
and END INIT IVTV lines when
Jan 19 22:15:30 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Jan 19 22:15:30 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Jan 19 22:15:30 localhost kernel: ivtv: Found an iTVC15 based chip
Jan 19 22:15:30 localhost kernel: ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 10
Jan 19 22:15:30 localhost kernel: PCI: setting IRQ 10 as level-triggered
Jan 19 22:15:30 localhost kernel: ACPI: PCI interrupt 0000:00:09.0[A]
-> GSI 10 (level, low) -> IRQ 10
Jan 19 22:15:30 localhost kernel: ivtv: Unreasonably low latency
timer, setting to 64 (was 32)
Jan 19 22:15:30 localhost kernel: ivtv: pci: VIA detected device:
0x3099 vendor: 0x1106
Jan 19 22:15:30 localhost kernel: i2c-algo-bit.o: ivtv i2c driver #0
passed test.
Jan 19 22:15:30 localhost kernel: ivtv: i2c client addr: 0x50 not found!
Jan 19 22:15:30 localhost kernel: ivtv: Error -19 reading Hauppauge eeprom.
Jan 19 22:15:30 localhost kernel: ivtv: Possible causes: the tveeprom
module was not loaded, or
Jan 19 22:15:30 localhost kernel: ivtv: the eeprom kernel module was
loaded before the tveeprom module.
Jan 19 22:15:30 localhost kernel: tuner: chip found at addr 0xc2
i2c-bus ivtv i2c driver #0
Jan 19 22:15:30 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jan 19 22:15:30 localhost kernel: saa7115: Ignoring new-style
parameters in presence of obsolete ones
Jan 19 22:15:30 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jan 19 22:15:30 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Jan 19 22:15:30 localhost kernel: saa7115: writing init values
Jan 19 22:15:30 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok]
Jan 19 22:15:30 localhost kernel: saa7115: status: (1E) 0x09, (1F) 0xc0
Jan 19 22:15:30 localhost kernel: msp3400: Unknown parameter `simpler'
Jan 19 22:15:30 localhost kernel: msp34xx: init: chip=MSP3448W-A2
+nicam +simple +simpler +radio mode=simple
Jan 19 22:15:30 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jan 19 22:15:30 localhost kernel: msp3410: daemon started
Jan 19 22:15:30 localhost kernel: ivtv: Encoder revision: 0x02040024
Jan 19 22:15:30 localhost kernel: ivtv: Decoder revision: 0x02020023
Jan 19 22:15:30 localhost kernel: ivtv: Configuring WinTV PVR 250 card
with 4 streams
Jan 19 22:15:30 localhost kernel: ivtv: Create DMA stream 0 using 128
buffers of size 32768
Jan 19 22:15:30 localhost kernel: ivtv: Create DMA stream 1 using 128
buffers of size 32768
Jan 19 22:15:30 localhost kernel: ivtv: Create stream 2 using 128
buffers of size 52224
Jan 19 22:15:30 localhost kernel: ivtv: Create DMA stream 3 using 128
buffers of size 32768
Jan 19 22:15:30 localhost kernel: ivtv: Setting Tuner 2
Jan 19 22:15:30 localhost kernel: tuner: type set to 2 (Philips NTSC
(FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
Jan 19 22:15:30 localhost kernel: ivtv: Could not detect tuner
standard, defaulting to NTSC.
Jan 19 22:15:30 localhost kernel: ivtv: Setting audio matrix to input
3, output 1
Jan 19 22:15:30 localhost kernel: ivtv: Switching standard to NTSC.
Jan 19 22:15:30 localhost kernel: saa7115: decoder set norm NTSC
Jan 19 22:15:30 localhost kernel: saa7115: set audio: 0x01
Jan 19 22:15:30 localhost kernel: ivtv: Initialized WinTV PVR 250, card #0
Jan 19 22:15:30 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Jan 19 22:15:30 localhost kernel: ivtv: Found an iTVC15 based chip
Jan 19 22:15:30 localhost kernel: ACPI: PCI Interrupt Link [LNKC]
enabled at IRQ 5
Jan 19 22:15:30 localhost kernel: PCI: setting IRQ 5 as level-triggered
Jan 19 22:15:30 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A]
-> GSI 5 (level, low) -> IRQ 5
Jan 19 22:15:30 localhost kernel: ivtv: Unreasonably low latency
timer, setting to 64 (was 32)
Jan 19 22:15:30 localhost kernel: ivtv: pci: VIA detected device:
0x3099 vendor: 0x1106
Jan 19 22:15:30 localhost kernel: i2c-algo-bit.o: ivtv i2c driver #1
passed test.
Jan 19 22:15:30 localhost kernel: tuner: chip found at addr 0xc2
i2c-bus ivtv i2c driver #1
Jan 19 22:15:30 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jan 19 22:15:30 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #1 (0x10005)
Jan 19 22:15:30 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Jan 19 22:15:30 localhost kernel: saa7115: writing init values
Jan 19 22:15:30 localhost kernel: ivtv: i2c attach [client=saa7115[1],ok]
Jan 19 22:15:30 localhost kernel: saa7115: status: (1E) 0x09, (1F) 0xc0
Jan 19 22:15:30 localhost kernel: msp34xx: init: chip=MSP3448W-A2
+nicam +simple +simpler +radio mode=simple
Jan 19 22:15:30 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jan 19 22:15:30 localhost kernel: msp3410: daemon started
Jan 19 22:15:30 localhost kernel: ivtv: i2c client addr: 0x50 not found!
Jan 19 22:15:30 localhost kernel: ivtv: Error -19 reading Hauppauge eeprom.
Jan 19 22:15:30 localhost kernel: ivtv: Possible causes: the tveeprom
module was not loaded, or
Jan 19 22:15:30 localhost kernel: ivtv: the eeprom kernel module was
loaded before the tveeprom module.
Jan 19 22:15:30 localhost kernel: ivtv: Encoder revision: 0x02040024
Jan 19 22:15:30 localhost kernel: ivtv: Decoder revision: 0x02020023
Jan 19 22:15:30 localhost kernel: ivtv: Configuring WinTV PVR 250 card
with 4 streams
Jan 19 22:15:30 localhost kernel: ivtv: Create DMA stream 0 using 128
buffers of size 32768
Jan 19 22:15:30 localhost kernel: ivtv: Create DMA stream 1 using 128
buffers of size 32768
Jan 19 22:15:30 localhost kernel: ivtv: Create stream 2 using 128
buffers of size 52224
Jan 19 22:15:30 localhost kernel: ivtv: Create DMA stream 3 using 128
buffers of size 32768
Jan 19 22:15:30 localhost kernel: ivtv: Could not detect tuner
standard, defaulting to NTSC.
Jan 19 22:15:30 localhost kernel: ivtv: Setting audio matrix to input
3, output 1
Jan 19 22:15:30 localhost kernel: ivtv: Switching standard to NTSC.
Jan 19 22:15:31 localhost kernel: tuner: tuner type not set
Jan 19 22:15:31 localhost kernel: saa7115: decoder set norm NTSC
Jan 19 22:15:31 localhost kernel: saa7115: set audio: 0x01
Jan 19 22:15:31 localhost kernel: ivtv: Initialized WinTV PVR 250, card #1
Jan 19 22:15:31 localhost kernel: ivtv: ====================  END INIT
IVTV  ====================

when using kernel 2.6.9-1.6_fc2 without stating a tuner
my info does this
Jan 19 23:15:50 localhost kernel: ivtv: ==================== START
INIT IVTV ====================
Jan 19 23:15:50 localhost kernel: ivtv: version 0.1.10
(0.1.10-48.4_pre2_ck100zz.rhfc2.at) loading
Jan 19 23:15:50 localhost kernel: ivtv: Linux version: 2.6.9-1.6_FC2
686 REGPARM 4KSTACKS gcc-3.3
Jan 19 23:15:50 localhost kernel: ivtv: In case of problems please
include the debug info
Jan 19 23:15:50 localhost kernel: ivtv: between the START INIT IVTV
and END INIT IVTV lines when
Jan 19 23:15:50 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Jan 19 23:15:50 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Jan 19 23:15:50 localhost kernel: ivtv: Found an iTVC15 based chip
Jan 19 23:15:50 localhost kernel: ACPI: PCI interrupt 0000:00:09.0[A]
-> GSI 10 (level, low) -> IRQ 10
Jan 19 23:15:50 localhost kernel: ivtv: Unreasonably low latency
timer, setting to 64 (was 32)
Jan 19 23:15:50 localhost kernel: ivtv: pci: VIA detected device:
0x3099 vendor: 0x1106
Jan 19 23:15:51 localhost kernel: i2c-algo-bit.o: ivtv i2c driver #0
passed test.
Jan 19 23:15:51 localhost kernel: tveeprom: Ignoring new-style
parameters in presence of obsolete ones
Jan 19 23:15:51 localhost kernel: tveeprom: Hauppauge: model = 48432,
rev = I110, serial# = 6158303
Jan 19 23:15:51 localhost kernel: tveeprom: tuner = Philips FI1236 MK2
(idx = 10, type = 2)
Jan 19 23:15:51 localhost kernel: tveeprom: tuner fmt = NTSC(M)
(eeprom = 0x08, v4l2 = 0x00001000)
Jan 19 23:15:51 localhost kernel: tveeprom: audio_processor = MSP3440
(type = 11)
Jan 19 23:15:51 localhost kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Jan 19 23:15:51 localhost kernel: ivtv: Tuner Type 2, Tuner formats
0x00001000, Radio: yes, Model 0x00a51450, Revision 0x00000000
Jan 19 23:15:51 localhost kernel: ivtv: NTSC tuner detected
Jan 19 23:15:51 localhost kernel: ivtv: Radio detected
Jan 19 23:15:51 localhost kernel: tuner: Ignoring new-style parameters
in presence of obsolete ones
Jan 19 23:15:51 localhost kernel: tuner: chip found at addr 0xc2
i2c-bus ivtv i2c driver #0
Jan 19 23:15:51 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jan 19 23:15:51 localhost kernel: saa7115: Ignoring new-style
parameters in presence of obsolete ones
Jan 19 23:15:51 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jan 19 23:15:51 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Jan 19 23:15:51 localhost kernel: saa7115: writing init values
Jan 19 23:15:51 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok]
Jan 19 23:15:51 localhost kernel: saa7115: status: (1E) 0x09, (1F) 0xc0
Jan 19 23:15:51 localhost kernel: msp3400: Ignoring new-style
parameters in presence of obsolete ones
Jan 19 23:15:51 localhost kernel: msp34xx: init: chip=MSP3448W-A2
+nicam +simple +simpler +radio mode=simpler
Jan 19 23:15:51 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jan 19 23:15:51 localhost smb: smbd startup succeeded
Jan 19 23:15:52 localhost smb: nmbd startup succeeded
Jan 19 23:15:52 localhost vncserver: vncserver startup succeeded
Jan 19 23:15:52 localhost anacron: anacron startup succeeded
Jan 19 23:15:52 localhost atd: atd startup succeeded
Jan 19 23:15:52 localhost readahead: Starting background readahead:
Jan 19 23:15:52 localhost kernel: ivtv: Encoder revision: 0x02040024
Jan 19 23:15:52 localhost kernel: ivtv: Decoder revision: 0x02020023
Jan 19 23:15:52 localhost kernel: ivtv: Configuring WinTV PVR 250 card
with 5 streams
Jan 19 23:15:52 localhost kernel: ivtv: Create DMA stream 0 using 128
buffers of size 32768
Jan 19 23:15:52 localhost kernel: ivtv: Create DMA stream 1 using 128
buffers of size 32768
Jan 19 23:15:52 localhost kernel: ivtv: Create stream 2 using 128
buffers of size 52224
Jan 19 23:15:52 localhost kernel: ivtv: Create DMA stream 3 using 128
buffers of size 32768
Jan 19 23:15:52 localhost kernel: ivtv: Create stream 4
Jan 19 23:15:52 localhost kernel: ivtv: Setting Tuner 2
Jan 19 23:15:52 localhost kernel: tuner: type set to 2 (Philips NTSC
(FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
Jan 19 23:15:52 localhost kernel: ivtv: Setting audio matrix to input
3, output 1
Jan 19 23:15:52 localhost kernel: ivtv: Switching standard to NTSC.
Jan 19 23:15:53 localhost kernel: saa7115: decoder set norm NTSC
Jan 19 23:15:53 localhost kernel: saa7115: set audio: 0x01
Jan 19 23:15:53 localhost kernel: ivtv: Initialized WinTV PVR 250, card #0
Jan 19 23:15:53 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Jan 19 23:15:53 localhost kernel: ivtv: Found an iTVC15 based chip
Jan 19 23:15:53 localhost kernel: ACPI: PCI interrupt 0000:00:0a.0[A]
-> GSI 5 (level, low) -> IRQ 5
Jan 19 23:15:53 localhost kernel: ivtv: Unreasonably low latency
timer, setting to 64 (was 32)
Jan 19 23:15:53 localhost kernel: ivtv: pci: VIA detected device:
0x3099 vendor: 0x1106
Jan 19 23:15:53 localhost kernel: i2c-algo-bit.o: ivtv i2c driver #1
passed test.
Jan 19 23:15:53 localhost rc: Starting readahead:  succeeded
Jan 19 23:15:53 localhost kernel: tveeprom: Hauppauge: model = 48432,
rev = I110, serial# = 6141938
Jan 19 23:15:53 localhost kernel: tveeprom: tuner = Philips FI1236 MK2
(idx = 10, type = 2)
Jan 19 23:15:53 localhost kernel: tveeprom: tuner fmt = NTSC(M)
(eeprom = 0x08, v4l2 = 0x00001000)
Jan 19 23:15:53 localhost kernel: tveeprom: audio_processor = MSP3440
(type = 11)
Jan 19 23:15:53 localhost kernel: ivtv: i2c attach [client=tveeprom[1],ok]
Jan 19 23:15:53 localhost kernel: tuner: chip found at addr 0xc2
i2c-bus ivtv i2c driver #1
Jan 19 23:15:53 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jan 19 23:15:53 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #1 (0x10005)
Jan 19 23:15:53 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Jan 19 23:15:53 localhost kernel: saa7115: writing init values
Jan 19 23:15:53 localhost kernel: ivtv: i2c attach [client=saa7115[1],ok]
Jan 19 23:15:53 localhost messagebus: messagebus startup succeeded
Jan 19 23:15:54 localhost kernel: saa7115: status: (1E) 0x09, (1F) 0xc0
Jan 19 23:15:54 localhost kernel: msp34xx: init: chip=MSP3448W-A2
+nicam +simple +simpler +radio mode=simpler
Jan 19 23:15:54 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jan 19 23:15:54 localhost kernel: ivtv: Tuner Type 2, Tuner formats
0x00001000, Radio: yes, Model 0x00a51450, Revision 0x00000000
Jan 19 23:15:54 localhost kernel: ivtv: NTSC tuner detected
Jan 19 23:15:54 localhost kernel: ivtv: Radio detected
Jan 19 23:15:54 localhost lircd: lircd startup succeeded
Jan 19 23:15:54 localhost lircd 0.7.0[2452]: lircd(any) ready
Jan 19 23:15:54 localhost kernel: ivtv: Encoder revision: 0x02040024
Jan 19 23:15:55 localhost kernel: ivtv: Decoder revision: 0x02020023
Jan 19 23:15:55 localhost kernel: ivtv: Configuring WinTV PVR 250 card
with 5 streams
Jan 19 23:15:55 localhost kernel: ivtv: Create DMA stream 0 using 128
buffers of size 32768
Jan 19 23:15:55 localhost kernel: ivtv: Create DMA stream 1 using 128
buffers of size 32768
Jan 19 23:15:55 localhost kernel: ivtv: Create stream 2 using 128
buffers of size 52224
Jan 19 23:15:55 localhost kernel: ivtv: Create DMA stream 3 using 128
buffers of size 32768
Jan 19 23:15:55 localhost kernel: ivtv: Create stream 4
Jan 19 23:15:55 localhost kernel: ivtv: Setting Tuner 2
Jan 19 23:15:55 localhost kernel: tuner: type set to 2 (Philips NTSC
(FI1236,FM1236 and compatibles)) by ivtv i2c driver #1
Jan 19 23:15:55 localhost kernel: ivtv: Setting audio matrix to input
3, output 1
Jan 19 23:15:55 localhost kernel: ivtv: Switching standard to NTSC.
Jan 19 23:15:55 localhost kernel: saa7115: decoder set norm NTSC
Jan 19 23:15:55 localhost kernel: saa7115: set audio: 0x01
Jan 19 23:15:55 localhost kernel: ivtv: Initialized WinTV PVR 250, card #1
Jan 19 23:15:55 localhost kernel: ivtv: ====================  END INIT
IVTV  ====================