[mythtv-users] X over PVR-350 TV Out (possible or just a myth?)

[John]

I just rebuilt my system with FC3, a few days back and everything is
working except X via the 350's TV out.  Everytime I boot the machine X
hangs on startup.  I get a black screen with an "x" in the middle and
it just sits there.   Any help on this would be much appreciated. 
Here are the details:

Used Jarod's Guide

Kernel = 2.6.10-1.741_FC3

[root at MythTV ~]# rpm -qa |grep ivtv
ivtv-firmware-dec-2.02.023-4.at
perl-Video-ivtv-0.13-6.rhfc3.at
ivtv-kmdl-2.6.10-1.741_FC3-0.2.0-61_rc3d.rhfc3.at
ivtv-0.2.0-61_rc3d.rhfc3.at
ivtvdev-0.8-1.rhfc3.at
ivtv-firmware-1.8a-4.at

[root at MythTV ~]#   lsmod |grep ivtv  
-----------------------------------------------------------------
ivtv_fb                29720  1
ivtv                  795364  2 ivtv_fb
i2c_algo_bit            8393  2 bttv,ivtv
videodev                9537  2 bttv,ivtv


[root at MythTV ~]#   lspci -v    
----------------------------------------------------------------------------
05:04.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Enc
oder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR-350
        Flags: bus master, medium devsel, latency 64, IRQ 5
        Memory at ec000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2


[Xorg.conf ]---------------------------------------------------------------------------------------------------------
Section "Device"
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
        Driver      "ivtvdev"
        #Driver      "fbdev"

        ### change fb0 to whatever your card grabbed
        Option      "fbdev" "/dev/fb1"

        ### change the BusID to whatever is reported by lspci, specify it as hex
.
     #   BusID "5:0x4:0"
        BusID "5:4:0"
EndSection

[grub.conf]-------------------------------------------------------------------------------------------------------
title Fedora Core (2.6.10-1.741_FC3)
        root (hd0,0)
#       kernel /vmlinuz-2.6.10-1.741_FC3 ro root=LABEL=/1 rhgb quiet vga=791
        kernel /vmlinuz-2.6.10-1.741_FC3 ro root=LABEL=/1 quiet vga=792
        initrd /initrd-2.6.10-1.741_FC3.img


[root at MythTV log]# cat /var/log/messages |grep "iTVC15 TV out"
----------------------
Jan 18 22:36:28 MythTV kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device



[Attachments] -----------------------------------------------------------------------------------------------
Attached is my /var/log/Xorg.0.log



Also I've tried the following solutions:
http://sourceforge.net/mailarchive/forum.php?thread_id=6340118&forum_id=27233
http://www.gossamer-threads.com/lists/mythtv/users/102792


John


P.S.  You know that WAF that everyone talks about...... well lets just
say there's a cold front moving through my area and that ground hog
won't be seeing his shadow anytime soon unless this gets fixed!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: application/octet-stream
Size: 19938 bytes
Desc: not available
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20050119/1f405aa7/Xorg.0.obj