[mythtv-users] PVR-350 & X (not working)
Frutillar
frutillar at comcast.net
Tue Jan 18 03:15:52 EST 2005
Well. This has been a long journey and I still cannot get X to display on my
tv-out. What am I missing? I would appreciate someone´s insight. I am
including a lot of information as this may shed some light with someone who
understands this a little more.
From the log files, it seems it is not taking the PCI BusID I am telling it,
but I am not sure.
Thanks for your help!
I did not have the IVTVDEV driver, but I found an e-mail thread stating where
I could find a copy. I downloaded it from...
http://www.gossamer-threads.com/lists/ivtv/devel/16634
and copied it into /usr/X11R6/lib/modules/drivers/. I also updated my
xorg.conf file as suggested by Jarod, but I do not get X on my tv-out. Here
is the tail of Xorg.0.log:
------------------------------
...
LoadModule: "ivtvdev"
(II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
(II) Module ivtv: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.8.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) IVTVDEV: driver for framebuffer: PVR-350
(II) Primary Device is: PCI 01:00:0
(WW) ivtvdev: No matching Device section for instance (BusID PCI:0:20:0) found
(EE) No devices detected.
Fatal server error:
no screens found
------------------------------------
I am using
Mandrake 10.1 (2.6.8.1-12mdk patched for my PVR-350)
ivtv 0.3.2a
lirc 0.7.0
ivtvdev_drv 0.8.0 (downloaded already compiled... see above)
MythTV 0.16
My xorg.conf is
------------------------------------
...
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "Screen0"
EndSection
Section "Monitor"
Identifier "NTSC Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x480"
# D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
DotClock 34.564
HTimings 720 752 840 928
VTimings 480 484 488 504
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtvdev"
#Driver "fbdev"
### change fb0 to whatever your card grabbed
Option "fbdev" "/dev/fb1"
#Option "ivtvdev" "/dev/fb1"
### change the BusID to whatever is reported by lspci, specify it as
hex.
#BusID "0:0x14:0" # I have tried both of these lines
BusID "0:0x0e:0" # see lspci below
EndSection
Section "Screen"
Identifier "Screen0"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
Monitor "NTSC Monitor"
DefaultDepth 24
DefaultFbbpp 32
Subsection "Display"
Depth 24
FbBpp 32
Modes "720x480"
EndSubsection
EndSection
---------------------------------------
the output of lspci -v is:
---------------------------------------
...
00:14.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2
Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
...
---------------------------------------
In case it is of use, here´s part of my /var/log/messages:
---------------------------------------
Jan 17 18:30:23 mbox kernel: ivtv: ==================== START INIT IVTV
====================
Jan 17 18:30:23 mbox kernel: ivtv: version 0.3.2 (a) loading
Jan 17 18:30:23 mbox kernel: ivtv: Linux version: 2.6.8.1-12mdk 686 gcc-3.4
Jan 17 18:30:23 mbox kernel: ivtv: In case of problems please include the
debug info
Jan 17 18:30:23 mbox kernel: ivtv: between the START INIT IVTV and END INIT
IVTV lines when
Jan 17 18:30:23 mbox kernel: ivtv: mailing the ivtv-devel mailinglist.
Jan 17 18:30:23 mbox kernel: ivtv: Autodetected WinTV PVR 350 card
Jan 17 18:30:23 mbox kernel: ivtv: Found an iTVC15 based chip
Jan 17 18:30:23 mbox kernel: ivtv: Unreasonably low latency timer, setting to
64 (was 32)
Jan 17 18:30:23 mbox kernel: ivtv: VIA PCI device: 0x3123 vendor: 0x1106
Jan 17 18:30:23 mbox kernel: tveeprom: Ignoring new-style parameters in
presence of obsolete ones
Jan 17 18:30:23 mbox kernel: tveeprom: Hauppauge: model = 48132, rev = K168,
serial# = 7391078
Jan 17 18:30:23 mbox kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68,
type = 47)
Jan 17 18:30:23 mbox kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,
v4l2 = 0x00001000)
Jan 17 18:30:23 mbox kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Jan 17 18:30:23 mbox kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Jan 17 18:30:23 mbox kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000,
Radio: yes, Model 0x00ad1598, Revision 0x00000001
Jan 17 18:30:23 mbox kernel: ivtv: NTSC tuner detected
Jan 17 18:30:23 mbox kernel: ivtv: Radio detected
Jan 17 18:30:24 mbox kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
Jan 17 18:30:24 mbox kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jan 17 18:30:24 mbox kernel: saa7115: Ignoring new-style parameters in
presence of obsolete ones
Jan 17 18:30:24 mbox kernel: saa7115: starting probe for adapter ivtv i2c
driver #0 (0x10005)
Jan 17 18:30:24 mbox kernel: saa7115: detecting saa7115 client on address 0x42
Jan 17 18:30:24 mbox kernel: saa7115: writing init values
Jan 17 18:30:24 mbox kernel: ivtv: i2c attach [client=saa7115[0],ok]
Jan 17 18:30:24 mbox kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Jan 17 18:30:24 mbox kernel: saa7127: Ignoring new-style parameters in
presence of obsolete ones
Jan 17 18:30:24 mbox kernel: saa7127: video encoder driver version V 0.3
loaded
Jan 17 18:30:24 mbox kernel: saa7127: detecting saa7127 client on address 0x88
Jan 17 18:30:24 mbox kernel: saa7127: Selecting NTSC video Standard
Jan 17 18:30:24 mbox kernel: saa7127: Selecting S-Video+Composite
Jan 17 18:30:24 mbox kernel: saa7127: Turn WSS off
Jan 17 18:30:24 mbox kernel: saa7127: Widescreen Mode 4:3 Full Format
Jan 17 18:30:24 mbox kernel: saa7127: Selecting Normal Encoder Input
Jan 17 18:30:24 mbox kernel: saa7127: Enable Video Output
Jan 17 18:30:24 mbox kernel: ivtv: i2c attach [client=saa7127[0],ok]
Jan 17 18:30:24 mbox kernel: msp3400: Ignoring new-style parameters in
presence of obsolete ones
Jan 17 18:30:24 mbox kernel: msp34xx: ivtv version
Jan 17 18:30:24 mbox kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM
support, simple (D) mode, simpler (G) no-thread mode
Jan 17 18:30:24 mbox kernel: msp34xx: $Id$ compiled on: Jan 9 2005 16:13:56
Jan 17 18:30:24 mbox kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jan 17 18:30:25 mbox kernel: ivtv: Encoder revision: 0x02040011
Jan 17 18:30:25 mbox kernel: ivtv: Decoder revision: 0x02020023
Jan 17 18:30:25 mbox kernel: ivtv: Configuring WinTV PVR 350 card with 10
streams
Jan 17 18:30:25 mbox kernel: ivtv: Create DMA stream 0 using 256 16384 byte
buffers 4194304 kbytes total
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 0 minor
0
Jan 17 18:30:25 mbox kernel: ivtv: Create DMA stream 1
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 1 minor
32
Jan 17 18:30:25 mbox kernel: ivtv: Create stream 2 using 40 52224 byte buffers
2097152 kbytes total
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 2 minor
224
Jan 17 18:30:25 mbox kernel: ivtv: Create DMA stream 3 using 455 4608 byte
buffers 2097152 kbytes total
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 3 minor
24
Jan 17 18:30:25 mbox kernel: ivtv: Create stream 4
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 4 minor
64
Jan 17 18:30:25 mbox kernel: ivtv: Create DMA stream 5 using 16 65536 byte
buffers 1048576 kbytes total
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 5 minor
16
Jan 17 18:30:25 mbox kernel: ivtv: Create stream 6 using 1024 2048 byte
buffers 262144 kbytes total
Jan 17 18:30:25 mbox kernel: ivtv: Registered v4l2 device, streamtype 6 minor
228
Jan 17 18:30:25 mbox kernel: ivtv: Create stream 7
Jan 17 18:30:26 mbox kernel: ivtv: Registered v4l2 device, streamtype 7 minor
232
Jan 17 18:30:26 mbox kernel: ivtv: Create DMA stream 8 using 6 103680 byte
buffers 622080 kbytes total
Jan 17 18:30:26 mbox kernel: ivtv: Registered v4l2 device, streamtype 8 minor
48
Jan 17 18:30:26 mbox kernel: ivtv: Create DMA stream 9 using 32 65536 byte
buffers 2097152 kbytes total
Jan 17 18:30:26 mbox kernel: ivtv: Setting Tuner 47
Jan 17 18:30:26 mbox kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by
ivtv i2c driver #0
Jan 17 18:30:26 mbox kernel: saa7115: decoder set input (4)
Jan 17 18:30:26 mbox kernel: saa7115: now setting Composite input
Jan 17 18:30:26 mbox kernel: ivtv: Setting audio matrix to input 3, output 1
Jan 17 18:30:26 mbox kernel: ivtv: Switching standard to NTSC.
Jan 17 18:30:26 mbox kernel: ivtv: ivtv_enc_thread: pid = 4987, itv =
0xdeed0480
Jan 17 18:30:26 mbox kernel: ivtv: ivtv_dec_thread: pid = 4988, itv =
0xdeed0480
Jan 17 18:30:26 mbox kernel: saa7115: decoder set norm NTSC
Jan 17 18:30:26 mbox kernel: saa7115: set audio: 0x01
Jan 17 18:30:26 mbox kernel: saa7127: Setting Encoder Video Standard
Jan 17 18:30:26 mbox kernel: saa7127: Set NTSC Video Mode
Jan 17 18:30:26 mbox kernel: saa7127: Selecting NTSC video Standard
Jan 17 18:30:26 mbox kernel: spurious 8259A interrupt: IRQ7.
Jan 17 18:30:26 mbox kernel: ivtv: Initialized WinTV PVR 350, card #0
Jan 17 18:30:26 mbox kernel: ivtv: ==================== END INIT IVTV
====================
...
Jan 17 19:53:00 mbox kernel: saa7127: video encoder driver unloaded
Jan 17 19:53:26 mbox kernel: saa7127: Ignoring new-style parameters in
presence of obsolete ones
Jan 17 19:53:26 mbox kernel: saa7127: video encoder driver version V 0.3
loaded
Jan 17 19:53:26 mbox kernel: saa7127: detecting saa7127 client on address 0x88
Jan 17 19:53:26 mbox kernel: saa7127: Selecting NTSC video Standard
Jan 17 19:53:26 mbox kernel: saa7127: Selecting S-Video+Composite
Jan 17 19:53:26 mbox kernel: saa7127: Turn WSS off
Jan 17 19:53:26 mbox kernel: saa7127: Widescreen Mode 4:3 Full Format
Jan 17 19:53:26 mbox kernel: saa7127: Selecting Normal Encoder Input
Jan 17 19:53:26 mbox kernel: saa7127: Enable Video Output
Jan 17 19:53:26 mbox kernel: ivtv: i2c attach [client=saa7127[0],ok]
---------------------------------------
More information about the mythtv-users
mailing list