[mythtv-users] ivtv-kmdl, PVR-250, FC3, Jarod's guide and no capture

Sun Jan 16 19:57:50 EST 2005

I'm having a similar issue with ivtv (specifically ivtv-kmdl-$KVER).
However, the issue I'm having appears to be a conflict with another
module, which I'm not sure is something that can be unloaded/removed.

Like George, I have everything else working great except for this. (the
critical component of course).

When doing: apt-get install ivtv-kmdl-$KVER  ($KVER = 2.6.10-1.741_FC3),
here is what the error message is:

################## Console CLIP
############################################
# apt-get install ivtv-kmdl-$KVER
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
  video4linux-kmdl-2.6.10-1.741_FC3
The following NEW packages will be installed:
  ivtv-kmdl-2.6.10-1.741_FC3 video4linux-kmdl-2.6.10-1.741_FC3
0 upgraded, 2 newly installed, 0 removed and 0 not upgraded.
Need to get 0B/169kB of archives.
After unpacking 434kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Committing changes...
Preparing...                ###########################################
[100%]
        file
/lib/modules/2.6.10-1.741_FC3/updates/drivers/media/video/tveeprom.ko
conflicts between attempted installs of
ivtv-kmdl-2.6.10-1.741_FC3-0.1.10-48.4_pre2_ck100zz.rhfc3.at and
video4linux-kmdl-2.6.10-1.741_FC3-20050113_172233-54.rhfc3.at
E: Error while running transaction
################## END CLIP ############################################

This is the only thing standing between me and MythTV bliss... Any
suggestions that don't require me to start over would be greatly
appreciated!

Other Details:
Fedora Core 3
Intel 865 Video
Hauppauge PVR-250

Thanks in advance for any feedback.

Best,
Mike

-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of George Lopez
Sent: Sunday, January 16, 2005 4:14 AM
To: Discussion about mythtv
Subject: [mythtv-users] ivtv, PVR-250, FC3,Jarod's guide and no capture
- newbie

I have a critical issue with mythtv.  I cannot capture
because I am not able to get ivtv to load.  Not sure
if this is a Jarod's guide issue, ivtv issue, or user
issue.  I have gotten everything up and running except
I cannot capture anything b/c I cannot get ivtv to
load.  I have done everything I could think of and
find on the mail lists.  I am so close, yet all I have
is a hunk of metal until I get this issue resolved. 
Modprobe.conf lines are there:
# nvidia kernel module
alias char-major-195 nvidia-1_0-6629
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv

[root at localhost mythtv]# uname -r
2.6.9-1.681_FC3
[root at localhost mythtv]# /sbin/lspci -v
+++++++++++
02:0a.0 Multimedia video controller: Internext
Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV
PVR 250
        Flags: bus master, medium devsel, latency 64,
IRQ 9
        Memory at e8000000 (32-bit, prefetchable)
[size=64M]
        Capabilities: [44] Power Management version 2
+++++++++
[root at localhost mythtv]# apt-get install ivtv-firmware
Reading Package Lists... Done
Building Dependency Tree... Done
ivtv-firmware is already the newest version.
0 upgraded, 0 newly installed, 0 removed and 20 not
upgraded.
[root at localhost mythtv]# apt-get install
ivtv-kmdl-$KVER
Reading Package Lists... Done
Building Dependency Tree... Done
ivtv-kmdl-2.6.9-1.681_FC3 is already the newest
version.
0 upgraded, 0 newly installed, 0 removed and 20 not
upgraded.
[root at localhost mythtv]# apt-get install ivtv
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
  ivtv-kmdl-2.6.10-1.741_FC3 kernel#2.6.10-1.741_FC3
The following packages will be upgraded
  ivtv
The following NEW packages will be installed:
  ivtv-kmdl-2.6.10-1.741_FC3 kernel#2.6.10-1.741_FC3
1 upgraded, 2 newly installed, 0 removed and 19 not
upgraded.
Need to get 17.0MB of archives.
After unpacking 45.4MB of additional disk space will
be used.
Do you want to continue? [Y/n] y
Get:1 http://ayo.freshrpms.net
fedora/linux/3/i386/updates kernel#2.6.10-1.741_FC3
2.6.10-1.741_FC3 [16.8MB]
Get:2 http://apt.atrpms.net
fedora/3/en/i386/at-testing ivtv-kmdl-2.6.10-1.741_FC3
1:0.2.0-61_rc3d.rhfc3.at [109kB]
Get:3 http://apt.atrpms.net
fedora/3/en/i386/at-testing ivtv
1:0.2.0-61_rc3d.rhfc3.at [101kB]
Fetched 17.0MB in 16m48s (16.8kB/s)
Committing changes...
Preparing...               
########################################### [100%]
   1:kernel                
########################################### [ 33%]

2:ivtv-kmdl-2.6.10-1.741_###########################################
[ 67%]
   3:ivtv                  
########################################### [100%]
Done.
[root at localhost mythtv]# /sbin/depmod -a
[root at localhost mythtv]# /sbin/modprobe ivtv
[mythtv at localhost ~]$ ll /dev/video?
ls: /dev/video?: No such file or directory

I su to root and no help on finding /dev/video?
[root at localhost mythtv]# ll /dev/video?
ls: /dev/video?: No such file or directory

I see I have .741 ivtv kernel installed.  Is it
supposed to match .681_FC3 kernel I am running?  If
so, how do I make the change?

Please help.  I have everything else working (sound,
mythfilldatabase, etc) since I just continued my
install process figuring I can go back to loading ivtv
once e-mail help arrives.

thanks,
George

__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail 