[mythtv-users] Anyone using MediaMVP with 0.16?
Rusty McEacharn
mceachrw at gmail.com
Tue Jan 11 23:29:20 EST 2005
the HOWTO is good, but you can avoid a LOT of work using the binary
releases. all you have to do then are steps 5 thru 5.4.
> Upon looking at mythbackend.log it says the client is trying to use
> protocol version 8 while the server (mythtv 0.16) is using protocol 13.
my log says that too, yet it can play recordings. what version
version of mvpmc are you using? i had similar problems using some of
the older binary releases. make sure your using the latest 2005
release.
if you think your dongle.bin.mvpmc file is bad, i have a known working
one on my ftp site you can try to rule that out. i'll send the link
off list.
also, check your /tftpboot/dongle.bin.mvpmc.config. it should look
something like the following if playing back vi nfs, assuming you
store recording in /myth/tv on your backend:
mkdir /myth/tv
/etc/nfsmount.sh 192.168.0.2:/myth/tv /myth/tv
/bin/mvpmc -M -f /etc/helvR10.fnt -s 192.168.0.2 -o svideo -a 4:3 -m
ntsc -r /myth/tv &
my /etc/exports looks like this:
/myth/tv 192.168.0.10(ro)
if playing back via the mythtv protocol:
rdate -s 192.168.0.2
/bin/mvpmc -M -f /etc/helvR10.fnt -s 192.168.0.2 -o svideo -a 4:3 -m ntsc &
More information about the mythtv-users
mailing list