[mythtv-users] Soundblaster live and AC3 for MythDVD help
Gregg Farhat
3gemail at gmail.com
Tue Jan 4 14:11:05 EST 2005
I did the commands you suggested and got this it is an sblive value.
[mythtv at mythtv mythtv]$ ls /dev/snd/
controlC0 hwC2D3 midiC1D2 midiC3D1 pcmC0D4c pcmC1D3p pcmC2D3c pcmC3D2p
controlC1 hwC3D0 midiC1D3 midiC3D2 pcmC0D4p pcmC1D4c pcmC2D3p pcmC3D3c
controlC2 hwC3D1 midiC1D4 midiC3D3 pcmC0D5c pcmC1D4p pcmC2D4c pcmC3D3p
controlC3 hwC3D2 midiC1D5 midiC3D4 pcmC0D5p pcmC1D5c pcmC2D4p pcmC3D4c
hwC0D0 hwC3D3 midiC1D6 midiC3D5 pcmC0D6c pcmC1D5p pcmC2D5c pcmC3D4p
hwC0D1 midiC0D0 midiC1D7 midiC3D6 pcmC0D6p pcmC1D6c pcmC2D5p pcmC3D5c
hwC0D2 midiC0D1 midiC2D0 midiC3D7 pcmC0D7c pcmC1D6p pcmC2D6c pcmC3D5p
hwC0D3 midiC0D2 midiC2D1 pcmC0D0c pcmC0D7p pcmC1D7c pcmC2D6p pcmC3D6c
hwC1D0 midiC0D3 midiC2D2 pcmC0D0p pcmC1D0c pcmC1D7p pcmC2D7c pcmC3D6p
hwC1D1 midiC0D4 midiC2D3 pcmC0D1c pcmC1D0p pcmC2D0c pcmC2D7p pcmC3D7c
hwC1D2 midiC0D5 midiC2D4 pcmC0D1p pcmC1D1c pcmC2D0p pcmC3D0c pcmC3D7p
hwC1D3 midiC0D6 midiC2D5 pcmC0D2c pcmC1D1p pcmC2D1c pcmC3D0p seq
hwC2D0 midiC0D7 midiC2D6 pcmC0D2p pcmC1D2c pcmC2D1p pcmC3D1c timer
hwC2D1 midiC1D0 midiC2D7 pcmC0D3c pcmC1D2p pcmC2D2c pcmC3D1p
hwC2D2 midiC1D1 midiC3D0 pcmC0D3p pcmC1D3c pcmC2D2p pcmC3D2c
[mythtv at mythtv mythtv]$ cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Cirrus Logic CS4297A rev 3
Capabilities : -headphone out-
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Crystal Semi 3D Stereo Enhancement
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : on
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0
Extended status :
SPDIF Control : Consumer PCM Copyright Category=0x22 Generation=1 Rate=48kHz
On Tue, 04 Jan 2005 13:07:07 -0500, Kyle Rose <krose+mythtv at krose.org> wrote:
> Gregg Farhat <3gemail at gmail.com> writes:
>
> > I am new to Linux, and am having trouble with the ac3 part. I
> > installed myth using Jarods Guide. Thanks.
> > I get sound using the SPDIF out on the sound blaster, but when I play
> > a dvd I get static and no sound. Can someone send me a woking config
> > for sblive .asoundrec to get sound from my dvd surround sound if
> > possible?
>
> It depends on which live card you have.
>
> First of all, OSS may work without a hitch, but I don't use it and
> haven't for several years, though at one point I did have AC3
> passthrough working with the OSS emu10k1 driver. I'd recommend it
> before trying ALSA if you just want to get something working.
>
> If that doesn't work, or you want to try ALSA out, first install the
> latest ALSA (1.0.7?), ls /dev/snd/ and see if you have the following:
>
> controlC0
> controlC1
> controlC2
> controlC3
> hwC0D0
> midiC0D0
> pcmC0D0c
> pcmC0D0p
> pcmC0D1c
> pcmC0D2c
> pcmC0D2p
> timer
>
> If so, cat /proc/asound/card0/codec97#0/ac97#0-0. If you have
> something like
>
> 0-0/0: SigmaTel STAC9721/23
>
> Capabilities :
> DAC resolution : 18-bit
> ADC resolution : 18-bit
> 3D enhancement : SigmaTel 3D Enhancement
>
> Current setup
> Mic gain : +0dB [+0dB]
> POP path : pre 3D
> Sim. stereo : off
> 3D enhancement : off
> Loudness : off
> Mono output : MIX
> Mic select : Mic1
> ADC/DAC loopback : off
> Extended ID : codec=0 rev=0 AMAP DSA=0
> Extended status : SDAC
>
> then we've got the same card and I can hook you up. :) FWIW, it took
> me about a week of tinkering to get this config to work properly, and
> while I *think* I understand it now, working with ALSA is something
> like quantum mechanics: if you look at it the wrong way, you
> irrevocably disturb the system. :)
>
> Cheers,
> Kyle
>
More information about the mythtv-users
mailing list