[mythtv-users] Confused about video card

Micha Kersloot micha at kovoks.nl
Tue Dec 20 10:31:49 EST 2005


Hi,

Op 19-dec-2005, om 9:15 heeft Ronald Wielink het volgende geschreven:

> Hoi Micha,
> it seems like you've made quite some progress. Since I'm struggling  
> with optimising my nvidia card as well (and living in Dutchland  
> just like you), would you please share the settings you are using now?
>

No problem, the main thing i've done is throwing the nvidia aside and  
plugging in my ati card again ;-) I'm using a SVideo cable. Maybe  
i'll try a VGA-Scart cable in the future. The best settings i've  
reached with my nvidia card where the following:

xorg.conf important parts:
Section "Device"
         Identifier      "NVIDIA Corporation NV34 [GeForce FX 5200]"
         Driver          "nvidia"
         Option          "TVStandard"            "PAL-B"
         Option          "TVOutFormat"           "SVIDEO"
         BusID           "PCI:1:0:0"
EndSection
Section "Monitor"
         Identifier      "Generic Monitor"
         Option          "DPMS"
         HorizSync       15-50
         VertRefresh     50-60
         Modeline "720x576_51.00" 27.14 720 736 808 896 576 577 580  
594 -HSync +Vsync
         # Sync Timing PAL: Horizontal frequency 15625 Hz. H sync  
width 4 uS (58 dots). Vertical frequency: 25 Hz, Vertical Sync width:  
192 uS (6 lines).
         Mode "720x576"
                 DotClock 14.5
                 HTimings 720 752 816 928
                 VTimings 576 580 586 625
                 Flags "Interlace" "-HSync" "-VSync"
         EndMode
         # PAL 50
         ModeLine "800x600x50" 33.1584 800 840 968 1056 600 601 605 628
EndSection
Section "Screen"
         Identifier      "Default Screen"
         Device          "NVIDIA Corporation NV34 [GeForce FX 5200]"
         Monitor         "Generic Monitor"
         DefaultDepth    24
         SubSection "Display"
                 Virtual         720 576
                 Depth           24
                 Modes           "720x576" "800x600x50"
         EndSubSection
EndSection

.nvidia-settings-rc:
# Attributes:

0/DigitalVibrance[TV-0]=0
0/ImageSharpening[TV-0]=0
0/SyncToVBlank=1
0/AllowFlipping=1
0/LogAniso=0
0/FSAA=0
0/TextureSharpen=0
0/ForceGenericCpu=0
0/CursorShadow=0
0/CursorShadowXOffset=4
0/CursorShadowYOffset=2
0/CursorShadowAlpha=64
0/CursorShadowRed=0
0/CursorShadowGreen=0
0/CursorShadowBlue=0
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/TVOverScan[TV-0]=16
0/TVFlickerFilter[TV-0]=120
0/TVHue[TV-0]=0
0/TVSaturation[TV-0]=166
0/XVideoOverlaySaturation=4096
0/XVideoOverlayContrast=4096
0/XVideoOverlayBrightness=0
0/XVideoOverlayHue=0
0/XVideoTextureSyncToVBlank=1
0/XVideoBlitterSyncToVBlank=0

The most important settings in mythtv (from memory, so i'm not a 100%  
sure)
Deinterlace: Bob
Filters: crop(remove a flickering line),adjust(picture was way too  
white)
Recording profiles: width=756, height=576

Met vriendelijke groet,

Micha Kersloot


More information about the mythtv-users mailing list