[mythtv-users] Serial DCT Control (dct2224/dct2524)
Chris
myth at phresh.net
Sun Dec 18 18:31:50 EST 2005
Can you be more specific please?
/usr/share/doc/mythtv-0.18.1/contrib
[mythtv at mitch contrib]$ ls
6200ch.c myth_archive_job.pl
6200ch-README mythencode.pl
change-channel-lirc.pl mythlink.sh
change-channel-lirc.sh mythmail
dct2000serial.tar.gz mythmaillog.pl
dct-channel mythname.pl
etc.init.d.mythbackend.lsb mythnotify
etc.rc.d.init.d.mythbackend myth.rebuilddatabase.pl
etc.security.msec.perm.local README.for.mythencode.and.mythname
etc.sysconfig.mythbackend temp
mandrake91.etc.sysconfig.lircd trailer.pl
master_iconmap.xml trailer.pl.README
mkiconmap.pl trailer.pl.svnfixes
mplayernetwork.pl tsc-calibrate.c
On Sun, 2005-12-18 at 15:27 -0800, Ian Forde wrote:
> On Sun, 2005-12-18 at 15:45 -0700, Chris wrote:
> > I've been trying for some time now to get serial channel changing
> > working, hopefully someone here can provide me with some insight into
> > the whole problem.
> >
> > I've got the following:
> > 2x Motorola DCT-2224, firmware version: 7.93
> > 1x Motorola DCT-2524, firmware version: 2.54
> >
> > I've tried a few different scripts to just try and change the channel
> > for now, none of which seem to work. When I connect the serial port of a
> > windows box to these DCTs, hitting enter results in gibberish coming
> > back from the DCT, followed by the f/w version. I assume this is some
> > sort of menu prompt (VxWorks?), the reason I assume this is because when
> > I go through the alphabet on the 2524, different keys produce different
> > outputs. Seeing as I get gibberish from all three is it safe to assume
> > that their serial ports are enabled?
> >
> > When I run the serial cable from the FC4 box to the windows box and run
> > the python scripts, I do get output over in Hyperterm, so it looks like
> > I'm sending the data out.
> >
> > I remember reading in one of the python scripts that it wanted v2.2, but
> > on my new FC4 box, I have python 2.4 installed, should this be an issue?
>
> Mmm... Just took a look at it - I haven't used (or even looked at) the
> code in a while. Python 2.4 is definitely going to be a problem, IMHO.
> I remember having issues with Python 2.3 as well... Best bet is to use
> the C code in contrib/ instead...
>
> > I seem to be able to get everything else working except serial channel
> > changing, so hopefully someone will be able to help me out.
> >
> > Thanks,
> > -Chris
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list