[mythtv-users] Everything is ok but Leadtek PVR2000 does not work
at all!
YanJun Lu
mythtv_sybaselu at yahoo.com.cn
Wed Dec 14 05:01:33 EST 2005
Hi team
First of all, take a look the hardware status of my system(I am running in Fedora core 3, have two capture cards i.e. Leaktek PVR2000 and based on saa7134 chip card is producted by demestic manufactoer, my problem is that the saa7134 card works great ,other card i.e. cx8800 chip does not work at all. as if Leadtek PVR 2000 supports PAL tv format, right? )
[root at root ~]#lspci -v
01:00.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
Subsystem: Philips Semiconductors: Unknown device 2001
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at feafec00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
01:01.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
Subsystem: LeadTek Research Inc.: Unknown device 663c
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
01:01.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
Subsystem: LeadTek Research Inc.: Unknown device 663c
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
[root at root ~]#lsmod
(...omit inimportant info)
saa7134 94869 0
ir_common 4677 1 saa7134
tuner 18413 0
cx8800 45149 1
cx88xx 19397 1 cx8800
video_buf 21701 4 bttv,saa7134,cx8800,cx88xx
i2c_algo_bit 8521 2 bttv,cx8800
v4l1_compat 11973 2 saa7134,cx8800
v4l2_common 5953 3 bttv,saa7134,cx8800
btcx_risc 4425 3 bttv,cx8800,cx88xx
videodev 9664 3 bttv,saa7134,cx8800
i2c_core 22081 7 bttv,lirc_i2c,saa7134,tuner,cx8800,cx88xx,i2c_algo_bit
(... omit inimportant info)
[root at root ~]#rmmod cx8800
[root at root~ ]#modprobe cx8800
[root at root~ ]#dmesg
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 9 (level, low) -> IRQ 9
cx8800[0]: found at 0000:01:01.0, rev: 5, irq: 9, latency: 64, mmio: 0xfc000000
cx8800[0]: subsystem: 107d:663c, board: Leadtek PVR 2000 [card=9,autodetected]
tuner: chip found at addr 0xc0 i2c-bus cx8800[0]
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by cx8800[0]
cx8800[0]: i2c attach [client=Philips PAL/SECAM multi (FM1216ME MK3)]
cx8800[0]: i2c register ok
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: registered device vbi0
cx8800[0]: set_audio_standard_BTSC (status: known-good)
cx8800[0]: cx88: tvaudio thread started
cx8800[0]: AUD_STATUS: 0x6f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
[root at root ~]# tail /var/log/messages
Dec 14 17:56:08 root kernel: cx2388x v4l2 driver version 0.0.4 loaded
Dec 14 17:56:08 root kernel: ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 9 (level, low) -> IRQ 9
Dec 14 17:56:08 root kernel: cx8800[0]: found at 0000:01:01.0, rev: 5, irq: 9, latency: 64, mmio: 0xfc000000
Dec 14 17:56:08 root kernel: cx8800[0]: subsystem: 107d:663c, board: Leadtek PVR 2000 [card=9,autodetected]
Dec 14 17:56:08 root kernel: tuner: chip found at addr 0xc0 i2c-bus cx8800[0]
Dec 14 17:56:08 root kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by cx8800[0]
Dec 14 17:56:08 root kernel: cx8800[0]: i2c attach [client=Philips PAL/SECAM multi (FM1216ME MK3)]
Dec 14 17:56:08 root kernel: cx8800[0]: i2c register ok
Dec 14 17:56:08 root kernel: cx8800[0]: registered device video0 [v4l2]
Dec 14 17:56:08 root kernel: cx8800[0]: registered device vbi0
Why? help ! it is important and emergent for me
Thanks and Cheers, give any response greatly appreciate in advanced
__________________________________________________
¸Ï¿ì×¢²áÑÅ»¢³¬´óÈÝÁ¿Ãâ·ÑÓÊÏä?
http://cn.mail.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051214/df03fd8a/attachment.htm
More information about the mythtv-users
mailing list