[mythtv-users] answer: Hauppauge 150 works direct from
/dev/video0, fails from myth
ktymyth at yoderhome.com
Wed Dec 14 00:21:55 EST 2005
When I originally ran myth-setup, I had not picked a hauppauge card.
I changed this later, but I didn't restart mythbackend. Once I
restarted mythbackend, everything started working normally.
Sorry for the noise...
On Dec 13, 2005, at 10:44 PM, Kurt Yoder wrote:
> Hi list
> I set up a new Myth box with a Hauppauge WinTV-PVR 150 (model
> 1045). I loaded the ivtv 0.4 driver, and successfully captured
> output from /dev/video0 (cat /dev/video0 > test.mpg). I viewed this
> using mplayer/kplayer, and the video and sound were both working
> Then I installed Myth, picked the hauppauge 250/350 card in the
> setup, and attempted to record. I am seeing these messages from the
> myth server:
> 2005-12-13 20:00:03.738 Changing from None to RecordingOnly
> 2005-12-13 20:00:03.758 Unknown video codec
> 2005-12-13 20:00:03.759 Please go into the TV Settings, Recording
> Profiles and
> 2005-12-13 20:00:03.759 setup the four 'Software Encoders' profiles.
> 2005-12-13 20:00:03.760 Assuming RTjpeg for now.
> 2005-12-13 20:00:03.761 NVR: Error, unknown audio codec
> 2005-12-13 20:00:03.793 NVR: Won't work with the streaming
> interface, falling back
> VIDOCGMBUF:: Invalid argument
> 2005-12-13 20:00:03.819 TVRec: Recording Prematurely Stopped
> I already went through the TV Settings -> Recording Profiles ->
> Software Encoders setup. I get a black screen and similar output in
> the log file when I attempt to watch live tv. Is there something
> I'm not doing right here?
> Debian pinned to mostly Sarge with some testing/unstable in the mix
> Linux 2.6.12
> ivtv 0.4
> mythtv 0.18.1
> Kurt Yoder
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users