[mythtv-users] KnoppMyth and Hauppauge 350

Mike Daugird MDaugird at erdman.com
Mon Aug 29 14:47:58 UTC 2005

Date: 29 Aug 2005 05:56:16 -0700
From: Jim Reith <reith at racores.com>
Subject: Re: [mythtv-users] KnoppMyth and Hauppauge 350
To: Discussion about mythtv <mythtv-users at mythtv.org>
Message-ID: < at pop.racores.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 08:40 AM 8/29/2005, you wrote:
>Hello, this is my first post so please bear with me.
>I have a P3 933 mhz, the PVR-350 with grey remote, and an old Nvidia TNT2
>in the AGP slot.
>MythTV comes up and I escape out to the command line.
>I type
>lircd start
>and then I try to run
>when I hit buttons on the remote nothing happens.
>The IR receiver is plugged in through what looks like a headphone
>connector on the back of the PVR-350, I plugged it in there since it fit
>and came with the card.
>There are no LED's on the remote. I am not sure if the remote is at fault,
>the receiver or my configuration.
>MY pvr-350 only has the remote plugged in right now as I have not figured
>out how I am going to connect this thing to the TV yet.
>Is there a cable that connects the sound card to the PVR-350? the only
>cables I found were a IR receiver, FM radio antenna, the big cable mess,
>and a little adapter piece. I have an onboard i8x0 sound with three plugs.
>thank you for your time and have a good day


Check out the section on lircrc in
http://knoppmythwiki.org/index.php?page=LIRCHowTo to set up your remote

You need to determine if you have the silver or grey remote to set up the
buttons properly.

thank you very much, I appreciate your help.

More information about the mythtv-users mailing list