[mythtv-users] Sound Problems

Tony Medina tmedinajr at gmail.com
Mon Aug 29 13:54:45 UTC 2005


I have read, and read, and read so many FAQ's, suggested resolutions, etc. 
and still am having sound problems. I am sure it is due to my relatively 
short history with Linux / Knoppix / MythTV. Here is a portion of the dmesg 
output -- any suggestions on how to get the audio setup will be appreciated.
 input: PC Speaker
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:00:04.0, irq: 11, latency: 66, mmio: 0x44080000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom: Hauppauge: model = 61201, rev = B226, serial# = 3248989
tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = None (type = 0)
bttv0: using tuner=8
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: 
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea632
0,tea6420,tda8425,pic16c54 (PV951),ta8874z
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 8 (Temic NTSC (4036 FY5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
root at mythtv:~#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20050829/de3cc1ed/attachment.htm


More information about the mythtv-users mailing list